LovesTheTeam.com

You will need

• The feeder can be constructed from
• -the tree;
• -packets-tetrapakov;
• -Plastic bottles.
• To fix the trough on the tree will require a thin, strong twine.

Instructions

1

In order to make a feeder, takea plastic bottle with a volume of 1.5 liters. Tighten the neck of the lid. With a thick needle, pierce the neck of the bottle in two places and draw a strong thread or a thin string through the holes. Leave loose the ends of the rope, 30-5-cm. In the bottom of the vertically placed bottle, cut out the "thumbnail" the size of the palm. Cover it with adhesive tape so that the birds do not get injured by sharp plastic. Do not throw away excess plastic, but cover the bottom of the bottle with the inside. The fact is that the grain in the trough will accumulate in the "dimples" at the bottom and become inaccessible to large birds. To stick food from the flat bottom of the feather will be much easier. Take the feeder to the park and tie the threads to a thick branch of the tree. Pour food onto the flat bottom of the bottle.

2

The feeder can be made from other materials. Take a paper bag from under the milk or juice (tetrapack). The upper part of it should be hermetically sealed, so use bags with a neck and lid. At the bottom of the bag, leaving 2 cm from the bottom, cut out the palm-sized window. There are two such "entrances" in the trough in the paper bag: so more birds can simultaneously peck your food.

3

You can make a wooden feeder. Take two identical wooden plaques: sturdy, but thin and light. Instead of wood, you can use textolite sheets or thick plastic. Drill a hole 4 holes in the corners of each sheet, receding from the edge of 3 cm. Take the rope and insert it into the holes. Tie the strong knots under each hole: they will hold the bottom of the trough. Insert the same ropes into the holes of the second sheet, having tied the knots on the ropes at a distance of 20 cm from the bottom sheet. Put the knots on the "roof" of the feeder and reinforce the material with knots. Make sure that you have the ends of the rope about 15 cm long. Tie these ends to the tree on which you want to place the feeder. Keep in mind that this house for birds is unstable, in the windy weather, food from it can fly away.

Tip 2: How to make a bird feeder from a bottle

With the arrival of the first frosts, it is necessary to take care of the birds, because it is difficult for them to survive in the conditions of a real Russian winter. Take care of the birds, make them with your own hands trough, it's so easy to do at home from a conventional plastic bottles.

You will need

• - five-liter plastic bottle;
• - liter plastic bottle;
• - stationery knife;
• - Scotch tape;
• - wire;
• - feed.

Instructions

1

You will need a three-liter or five-liter plastic bottle that has a rounded shape. At the top bottles make a clerical knife hole, which should be a few inches less than the diameter of a liter bottles. Such a hole will not allow the bottle to slip further down.

2

Take the marker and draw on the sides bottles two large circles that should be locatedin front of each other. Make holes on the drawn markings, and birds will fly into them. Leave from below the small protective edges, due to which the wind will not blow out the food from bottles. Cut off the circle do not throw away, it will serve as a kind of saucer.

3

Plastic snack on the bottom of a large bottles with the help of glue or tape. Then take a 1 liter plastic bottle, flip it upside down and insert it into the top hole made in a large container. Push it down so that there is a gap of a couple of centimeters between the neck and the homemade saucer.

4

Join the two bottles with tape. Thus, the structure does not move and does not break even under the influence of a strong wind. Also, scotch will not allow moisture to get moisture in the gap between the bottles and will not wet the feed.

5

At the top of the liter bottles (from the side) make a small hole through ityou will continue to fall asleep. It can be sunflower seeds, bread crumbs or millet. The feeder is ready, it remains only to find a suitable place and fix it with a wire to the tree trunk.

6

Maybe the first few days, or even a coupleweeks, your feeder will not cause a special excitement among the local birds, as they will need some time to explore new sources of food. Soon the feeder will become a favorite food place among tits and sparrows.