How to turn on flash on iPhone 4
How to turn on flash on iPhone 4
The best camera is the one that is always with you. For many people, this is a smartphone option. In the iPhone, this built-in attribute has impressive characteristics that are important to be able to use correctly. For example, you need to know how to turn on the flash in iPhone 4.
Instructions
1
The very first iPhone model was equipped with a verysimple camera. It allowed to get good photos, but did not have some useful functions - flash, zoom and focus settings. The latter appeared in the 3GS model; with the advent of the iPhone 4S, the camera is equipped with a zoom and flash, and after the release of the smartphone 5 generation - there is the possibility of creating panoramic images. In connection with the emergence of additional features and capabilities, users began to ask questions about the proper use of the smartphone. The most common of these is the inclusion of the flash on the iPhone 4. In order to do this, you must follow the following steps.
2
First you need to learn how to switch camerasАйфона. The iPhone is equipped with two cameras - on the front and back surfaces of the device. The first one is used for FaceTime and similar resources, the second one is used for shooting. By default, the camera located on the rear panel is usually turned on, with a higher resolution. If your device has other settings, switching is done by simply pressing the button located in the upper right corner. To see which camera is turned on at the moment is very simple - a picture appears on the screen that gets into its lens.
3
Camera iPhone, as a rule, well fixesDetails of the image, including in low light conditions. However, adding a flash will allow you to improve the quality of the photo. To turn on the flash on the iPhone 4, you need to start the camera and find the icon with a lightning in the upper left corner of the screen.
4
There are several options for usingFlashes. Off is the default setting for the camera, its meaning is obvious. Auto is displayed when you click on the lightning bolt icon. Select this setting if you want the flash to fire only when necessary - in poor lighting conditions. On - connects in the same way as the previous setting. If you select this option, the flash will be used when you create each photo.
