How to tie a mitten-mitten
How to tie a mitten-mitten
Such a necessary attribute for water procedures,as a bast, it's easy to make yourself in one evening. At the same time, an economical hostess can do without additional costs. In the course will go the balls of synthetic threads, cords, string bags, trimming the canvas. Convenient version of the product - a wide mitten without fingers, which stretches on the hand while washing in the bathroom or bath. Try to crochet it in the form of a hollow rectangle.
You will need
- - hook number 5;
- - working thread (kapron, linen, sisal, etc.);
- - knitted fabric;
- - cotton threads;
- - the needle;
- - overlock;
- - scissors.
Instructions
1
Choose the right material for knitting wool-mittens. Depending on the structure of the working thread, the product will turn out to be more or less rigid - it all depends on your preferences.
2
Bind soft and fluffy loofah-mittens it is possible from a color kapron thread. The bath accessory of an average degree of rigidity will come from a linen or sisalic cord, as well as a long kapron ribbon not more than a centimeter in width. You can use old vegetable nets - to get a zigzag thread, the bags are cut in a spiral. Finally, in the course will go the hank of a synthetic rope - from it the most rigid self-made washcloths are made.
3
Knit the product is recommended large viscous, not too tightening the loop, so that the texture of the canvas is quite loose. The optimal tool for this work is hook # 5.
4
From the selected thread, make 25-30 air loopsand try on the chain on your wrist. The mitten-mitt should be free to hold on to the hand, but not to fall off it. For the lower edge, you can provide a cushion from the knitted fabric - this will slightly drag the product.
5
If the length of the air chain suits you,make in its first loop a connecting half-loop - you will get a circle. Next, knit the sponge with continuous circular rows of columns without a crochet. To rise to the next row, at the beginning of each new circle, you must perform one air loop.
6
When the hollow double canvas reaches the desiredheight, connect the top parts of the product. Insert the hook rod through each two bars (bottom and top) and make half-pins to connect the entire top of the bast.
7
Cut the work thread and drag its end tothe underside of the mittens. If desired, you can cut a knitted strip for the cuff: length - according to the perimeter of the lower part of the product plus 1.5 cm on the connecting seam; width - about 8-9 cm.
8
Fold the strip in the wrong side up and sew on the side inring. After that, turn out the cuff, fold it twice and sweep the edges manually or on the overlock. Attach the edge of the part to the mitten and gently sew it to the linen cloth with threads of a suitable tone.
9
Remove the tag. For convenience, you can sew to the finished product loop, then the bath accessory can be hung on the hanger bathroom or dressing room.
