Tip 1: What are the virtues

Psychology

Tip 1: What are the virtues

Advantages These are qualities that we consider positive. They attract us in people. Dignity is a concept that simultaneously unites all people, because in each person there are certain qualities, and divides them into certain categories.

Instructions

Every person can have a lot of advantages. For example, a man is externally beautiful, kind, accurate, loves pets. And many people are attracted to these qualities. But he may have flaws, which overshadow all the listed advantages. And with a close acquaintance with this man, people begin to understand that it is difficult for them to communicate with this person.

Advantages Is a rather vague concept. For example, one person can consider ambition as a dignity, and to another this quality, on the contrary, strongly disgusts. Yes, and over time, a certain dignity in a person who initially liked, may later prove to be a disadvantage, and vice versa.

Why should people develop their dignity? What do these qualities help in life? For example, when hiring a job, any competitor is assessed for various parameters. At such moments, a person tries to show all of his dignity, which directly affect the evaluation of his employer on the positive side. Usually companies require that the applicant has the following qualities: communicability, the presence of a certain education, knowledge of the PC, the absence of bad habits, etc. People who have these advantages, have every chance to meet the requirements of the employer.

Thus, dignity helps anyoneget a job, choose a wife (husband), communicate with other people. It is virtues that help to relate a person to a particular social group. For example, the usual class in the school is divided into 2 to 3 subgroups on average: excellent students - smart, well-read children; good guys - guys who show a marked interest in learning, but they lack the perseverance of excellent students; Троечники - children, whom the teachers usually draw, so that they do not stay for the second year. In terms of communicability class can also be divided into children who easily find a common language with the interlocutors, and the children are shy, interacting little with others.

Advantages help a person interact with surrounding people and build their lives properly. Do not try to eradicate your shortcomings, emphasize the development of virtues.

Tip 2: What is a laminated formwork

Laminated formwork allows you to save onbuilding a monolithic house or other concrete objects is a lot of money - because it can be collected and disassembled up to 100 times. It consists of an aluminum, steel, wooden or plastic frame and reinforced with laminated plywood.

There are two types of formwork technology: tunnel and shield. The first allows to build buildings of frame type without beams, and the layout can be absolutely any. The shield is considered to be more rapid, with its help it is possible to lift the walls of the building simultaneously with the internal ceilings. There are also shuttering systems for manufacturing other objects, including columns.

Advantages laminated formwork

possibility to use plywood multiple times
Quick installation and disassembly
ease of replacement and repair of failed components
chemical neutrality of the laminate to concrete mixtures
tightness and waterproofness of the forming surface

Laminated plywood for formwork

To create a formwork a specialplywood made of birch or spruce, with a protective two-sided coating of surfaces. The thickness and composition of the laminate largely depends on the physical and operational properties of the material. Polypropylene laminate shows the best results in impact hardness and has the least adhesion to concrete, but the phenol coating lasts longer than the abrasion test, it has higher bending and tensile strength.

Laminated plywood for formwork can bemade of birch or coniferous wood. Birch is considered to be a more durable material, but the pine has less hygroscopicity and a greater modulus of elasticity. The dimensions and thickness of the plywood for the formwork depend on its purpose and the weight of the future concrete structure, material from 6 to 24 mm is used.

It is important that in the manufacture of laminatedForms all the ends were protected by a sealant, otherwise the turnover of plywood will be significantly reduced. When deciding to buy laminated plywood for formwork, you need to know about the manufacturers. For example, the Finnish plywood is considered more flexible and wear-resistant, but a similar material from Syktyvkar practically "does not lead" with changes in temperature and humidity.

Tip 3: Navigator with Registrar: Advantages, Disadvantages and Features

More and more motorists are attracted by so-called "hybrid" gadgets, when in one case several devices are combined. One of them is a navigator with a registrar.

What is a navigator with a registrar?

Navigator with a registrar is first of allnavigator, and the functions of the DVR here have been added as a bonus. It looks like a regular tablet. Since in such devices the navigator is considered to be the main one, its quality, as a rule, is at a high level, but the DVR can give such a bad picture that the need to use it immediately disappears. However, this already depends on the particular device, as well as on its cost. When choosing a navigator with a DVR, you need to pay attention to the supported resolution of the device (the higher, the better the image quality), the format of the recorded video (this can be VGA or HD). You also need to consider the power of the processor: it must cope with the simultaneous operation of the navigator and DVR. Do not take processors with a clock speed below 500 MHz, since in this case the picture may be fuzzy.

Pros and cons of the "hybrid" device

The first advantage of this device issaving money. On average, such a device costs about $ 50. This is much less than if you buy a navigator and DVR separately. Another advantage - saving space on the windshield. Two separate devices will occupy more space, and also limit visibility for the driver. Also, the navigator with the registrar has the advantage and in the power supply. Since both the GPS navigator and the DVR are connected from the cigarette lighter, and in the car it is only one, then if there are two separate devices, this can be a problem. Of course, you can solve such a problem by purchasing a cigarette lighter twin or using these gadgets in turn, but this is not always convenient. As for the negative moments, the most important of them is the limited capabilities of the DVR. For example, in such hybrid devices, there are very few recorders with the possibility of night shooting or recording of sound. Also, the viewing angle of the recorder is "cut off" and is about 75 degrees (usually a radius of at least 120 degrees). There are also problems with the placement of this device. You need to place it so that the registrar has the best view of the road, and it was easy to reach the navigator. It is not so easy to do this and it will be necessary to seek a compromise solution. Although the technology is developing very rapidly, and after a while experts will come up with how to solve most of these problems.

Tip 4: What is Hair Coloring?

Gone are the days when women were at the service ofonly two ways to change the color of hair: staining or lightening. Today, there are many other ways to change and look more natural. One such method is hair coloring.

What is coloring?

This is a fairly new procedure for dyeing hair,radically different from all the usual, thanks to the use of several colors at once. It begins with the division of the entire mass of hair into zones, each of which is subsequently divided into strands, colored separately in different colors. In this case, can be painted as the entire mass of hair, and its parts. The process itself is quite laborious and takes quite a lot of time, especially when it comes to multi-color coloring of the entire head.

Conditionally it is possible to name coloring by color melioration, but if in the last process of coloring one or two colors are used, then the colors can be more than a dozen in coloring.

Types of coloring

It can be longitudinal and transverse. The first is the most common and involves the application of the dye over its entire length. Transverse coloring requires more skill, because here due to the use of different shades, the effect of a smooth transition of one color to another is achieved, which looks more natural. With this approach, the color lasts longer regardless of whether black or white is chosen. The choice of shades during coloring depends largely on the basic tone of the hair and on what result you want to get. If the soul asks for something bright, you can always stop on neon coloring, when using special dyes, the effect of special highlighting of the hair is achieved, or simply take bright dyes, for example, black and white or red and red. Fans of a more natural style can be approached by mother-of-pearl coloring, making hair more shiny in appearance.

There is a technology for combining transverse and longitudinal coloring. In this case, the hairstyle looks especially impressive.

Advantages and disadvantages of the methodology

On the positive side of this technologya lot, and this despite the fact that the benefit of dyeing hair due to dye compositions is questionable in principle. Among the advantages are a visual increase in the volume of hair and giving a magnificent hairdo. Also, coloring allows you to give originality to any, even the most simple haircut and transform any hair, though white, even light brown, even black. Due to the uneven staining of the strands, the appearance of the haircut will change even with the simplest change in the direction of combing. But the disadvantage of this technique is only one: in the absence of professional skills about the result, captured on posters in beauty salons or in glossy magazines you can not dream. In the hairdressers themselves, coloring is quite expensive, since it requires not only long-term work, but also the use of several shades of paint.

Tip 5: What is "Plasti Deep"

A new word in the car tuning - "Plasti Deep"(Plasti Dip) or liquid vinyl. The manufacturer guarantees that it completely changes the color of the machine, makes the surface matte or glossy, conceals small scratches or chips. But is it so?

"Plasti Deep" is a specialThe composition of liquid rubber, which is applied using a spray gun. With it, you can cover the surfaces of any complexity - from the hood and the door to the discs and radiator grilles.

Advantages of "Platey Dip"

Provides protection of paint and varnish coating of the body or discs from the influence of external factors, ultraviolet, salt, chemical reagents.
The manufacturer guarantees the safety of the coating in the event of temperature changes from -30 to +90 degrees.
Unlimited design possibilities. With the help of "Plasti Deep" paint, you can make any metal and plastic parts that are very dull and colored, which helps a lot in tuning the car. Most often with its help paint the body, wheels, radiator grilles, crochets, skirts, thresholds, lights. Conveniently with their help also to process details inside the interior - the panel, the steering wheel, etc.
According to the manufacturer's annotation, the coatinghas the greatest strength and resistance to abrasion. The most responsible companies engaged in tightening with auto vinyl, even ready to give a guarantee for several months of operation.
Easy dismantling. If necessary, you can easily remove liquid vinyl from the surface of the machine.

disadvantages liquid vinyl

However, before "Plasti Deep" to buy, you needto find out all possible information about its shortcomings. The first of them can be noticed already immediately after the pasting of the car with vinyl is completed. These are chips and cracks, which, contrary to expectations, still appear through the paint. To avoid this, it is necessary to primer and fill in all the cracks beforehand, as it should before any painting.

Even the slightest disruption of surface preparationleads to the fact that the rubber slightly away from the edges. As a result, water and dirt get inside, in the cold it freezes, expands, the coating bursts. To avoid this, it is necessary to degrease the surface very carefully before painting. It is better to refuse from self-taping vinyl with your own hands and turn to professionals.

As shown in the "Plate Dip" reviews, thisthe coating is very afraid of petroleum products and gasoline. To wash the machine you can use degreasing agents, but it's better to do without hard brushes and scrapers, otherwise you can just tear the rubber film. And the last drawback of "Plasti Deep", typical of many vinyl covers in general - bright shades quickly fade with constant exposure to the sun.