Tip 1: How to make a toilet

Tip 1: How to make a toilet



The first problem facing the newly married couple is lucky, this is the organization of the toilet. This article will help you quickly and inexpensively to build a practical country toilet.





How to make a toilet


















You will need




  • - wood tools
  • - screwdriver or screwdriver
  • - a hammer
  • - nails and screws
  • - roof slate




Instructions





1


The first and most important thing is the creation of a cesspool. It is better to do a pit as deep as possible, otherwise you will often have to deal with a sewage truck that takes out your "life results". Digging a cesspool requires an individual approach and depends heavily on the type of soil.





2


Assemble the frame of the future toilet, for which it is betterthe bar will be 100х100 mm. The sizes of the toilet, again, are determined individually (especially since many combine toilets with, for example, a shed for storing tools), usually enough 150x100 cm at a height of 200-220 cm.





3


Having assembled the frame, it is worth checking how exactly it turned out, to measure the angles and diagonals.





4


At an altitude of about half a meter from the floor level (again, determined individually), fix on the frame the carriers of the future seat (you can use a bar of 50x50 mm.).





5


Cut a sheet of plywood or chipboard under the size of the future seat, cut out the hole in the toilet seat. You can use and ordinary boards, covering them later, for example, linoleum or orgalite.





6


Wrap the toilet from the inside with the same plywood ororganic, outside - to taste, for example, trimmed lumber or, for a greater aesthetics, lining. The roof can be made of sheet slate or iron.




























Tip 2: How to make a holiday toilet



Restroom at the cottage can be represented in variousvariants. If you are thinking about installing, then be sure to consider all possible and permissible in your case the options. Some nuances should be taken into account.





How to make a villa








Instructions





1


The easiest way to install a summer residence isbio-toilet. However, you will have to pay some money for it. At this time, this option is the most convenient for solving the set goal. A dry closet can be moved from place to place if desired. It does not need to conduct electrical wires. Also there is no need to install a sewer pipe and bring water.





2


The main elements of this toilet are twotank - upper and lower. In the biotoilete a special liquid is used, which is able to quickly eliminate and disinfect drains. This liquid is poured into the lower tank. In the upper tank is placed a deodorant, which eliminates unpleasant odors.





3


Most often in the country people install woodentoilets. In advance, a place should be considered where the construction will be placed. After this, it is necessary to make a deep cesspool. It can be represented in several variants: a conventional cesspool, a surface septic tank, an underground septic tank, concrete rings that form a cesspool overflow.





4


The design must have a bottom. Do not expect that the lack of a bottom will affect the rapid disappearance of sewage. In this case, there may be problems associated with poisoning of drinking water. Please note, you may encounter problems with the law. The optimal solution for a holiday toilet is a septic tank. It will ensure the absence of unpleasant odors. The wooden toilet in the country house is very easy to operate and maintain.





5


Septic people often arrange on their own. If the family consists of four people, then you can use a surface septic tank. It is an ideal option for a high groundwater level. If the number of residents is large enough, it is recommended to arrange a traditional underground septic tank.












Tip 3: How to make a wooden toilet



For many summer residents who bought suburban plots, the question is how to make a wooden restroom? Indeed, the toilet is such an object,which must be built first. Ideal option - a familiar for everyone in the bathroom inside the house. But in the suburban areas there is no sewage system, so make a wooden house yourself.





How to make a wooden toilet








You will need




  • - a hammer;
  • - screwdriver;
  • - plane;
  • - saw;
  • - Chisel;
  • - Roulette;
  • - timber;
  • - bitumen;
  • - plywood;
  • - nails;
  • - ruberoid;
  • - bitumen;
  • - Slate.




Instructions





1


Before the construction of a wooden toilet,choose a place for him. It must meet certain requirements. If your country plot has a slope, then build a toilet below the wells and wells. The distance from it to the water source should be 30 meters, and to the building - 15 meters.





2


Determine the depth of groundwater. At a depth of more than 3 meters, a toilet with a cesspool is built. If the depth of groundwater is less than 3 meters, they build a powder-closet, which has a waterproof capacity under the stool. It pours out when you fill it.





3


Prepare a cesspool. For this, dig a foundation pit with a depth of one and a half meters. The walls of the pit and the bottom should be concreted or bricked.





4


House for a wooden toilet collect and lap apart, and not at the place of placement of the toilet. The size of the wooden toilet is as follows: width - 1 meter, length - 1.5 meters, height - 2.1 meters.





5


Make a frame of three-meter length from a bar 10х10see Frames and a bar for a skeleton strengthen with connection "vpolderova". To do this, take out the thickness of the bar at the junction points. The connection should be perfect - without distortions and protrusions. Do not reduce the length of the beam. It is necessary to strengthen the wooden toilet, as supporting piles.





6


Sand all joints. Take the nylon thread and check the diagonals.





7


From the floor measure the distance of 50 cm. Fasten a beam of 50x50 cm at this height to support the seat.





8


Take a thick plywood and cut out the required hole size. Attach the resulting product to the installed frame.





9


Sew the walls, floor and space up to the stool with thick plywood or sheets of particle board. The roof is formed with a slope to the back wall of the wooden toilet. Cover it with zinc or slate.





10


For the door, make a frame with two lintels andcoat the plywood or chipboard. Make grooves under the piles. Piles, parts of the shell and frame, which face the ground, cover with a layer of bitumen. Lay a waterproofing between the bottom of the toilet and the ground. The wooden toilet is ready.