LovesTheTeam.com

You will need

• - Ammonium alcohol;
• - baking soda;
• - liquid soap or detergent;
• - white spirit, refined gasoline, turpentine, acetone or liquid to remove varnish;
• - medical alcohol;
• - stain remover or bleach;
• - a special tool for removing markers.

Instructions

1

Mix ammonia with baking soda inThe ratio is 2: 1. So you should get a soft paste. Apply to a contaminated area and leave for a few minutes. Then rub the mark from the spot with an old toothbrush. Rinse the cloth in running water and wash in the usual way.

2

Remove marks from water-based markers whenaid of a soap solution. In a container with warm water, stir a little liquid soap or detergent. You can also add 1 tablespoon of ammonia. Moisten the foam sponge in the resulting solution and treat the soiled area.

3

Use white spirit, refined gasoline,turpentine, acetone or nail polish remover. With the help of solvents, it is easy to remove traces even from water resistant markers. To do this, moisten the cotton pad in one of the listed products and attach to the spot. After 5 minutes, rinse clothes thoroughly and wash.

4

Remove stains from markers can be medicalalcohol. On the back, attach a white cloth or paper towel. Then moisten a cotton or gauze swab in alcohol and treat the contaminated area. Then rinse the trail from the stain under a stream of running water.

5

Use modern means of householdchemistry. Put a little stain remover on the stain from the markers. Leave on for 30-40 minutes. After this time, rinse the cloth and wash with a highly active powder or with the addition of a stain remover. For cleaning white fabrics, it is better to use oxygen bleach.

6

Buy in the stationery storeA special tool for removing traces from a felt pen. Usually it is produced in the form of pencils or sprays. This product effectively removes stains. Apply it to the soiling and wait for a while. Then rinse the trace from the stain in the running water.