How to install an inflatable pool
How to install an inflatable pool
Inflatable swimming pool is a great wayentertain children bored in the country, and protect them from the summer heat, and adults, too, are happy to rest in the cool water of the pool. At the same time, the inflatable pool is cheap enough, easy to install and maintain, and in a minimized form (for example, for winter) does not require a lot of storage space. But in order to enjoy the inflatable pool, you need to install it correctly.
Instructions
1
Even before buying an inflatable pool,correctly estimate its size and find a suitable area on the site. In addition, choosing a swimming pool, specify its type: inflatable or bulk. In the first case, it is necessary to pump all the walls of the pool, and in the second - only the upper ring, which floats up during the filling of the pool with water. A pool for children is better to take with an inflatable bottom to protect the child from bruises and bruises. Note that the pools of round shape have greater strength due to the uniform pressure of water on their walls.
2
After acquiring the pool, prepare for itpad. The required area is usually indicated in the instructions. The place you choose should be level, do not have slopes and depressions. It is better not to install a pool near trees, since the leaves will pollute the water. In addition, the water in the pool will be heated only in a natural way, that is, the place should be sunny.
3
The site should be thoroughly cleaned from allstones, twigs, cones, glasses and debris, since all these objects can damage the integrity of the bottom of the pool. In addition, the pool can not be installed on sand, clay, or simply soft ground, since after filling with water the base can sink. Before installation, the swimming pool area should be covered with a thick tarpaulin or PVC - the material from which the advertising banners are made. This will not only create additional protection against damage, but also reduce the temperature loss.
4
Determine in advance where you will bedrain the water. Even in a small pool, the mass of water can be about 1 ton, so choose the direction of water drainage before filling the pool. Note that the pool is strictly forbidden to move along the ground, so that it needs to be laid directly on the site. Inflate the pool with a pump. Do not use compressed air devices, such as compressors, because the walls can be damaged.
5
Make sure that the drain valve is tightly closed. Fill the pool basin with water a few centimeters to make sure the pool is level. If the water level from different sides of the pool is different, then you need to drain the water and level the surface of the site. If the water level in all parts of the basin is the same, then straighten all the folds and fill the pool to the marked level.
