How to determine that pipes require replacement

How to determine that pipes require replacement



To leaky pipes did not causeflood in your apartment, and did not break a significant gap in your budget, you should know how to properly assess their condition. If it is found that the pipes require replacement, do not over tighten with repair. How to correctly assess the condition of the pipes?





How to determine that pipes require replacement

















Open the tap until it stops. If the water from it goes a weak and thin trickle, then the pipes on the inside are covered with a layer of deposits. To exclude the risk of error, ask neighbors what the pressure of water in their apartment. If the situation is similar to yours, it means that it is not a matter of depositing the raid on the pipes, but in the work of the water canal. But if in the next apartment the tap water flows well, prepare yourself for the pipes to be replaced.

Carefully study the external condition of pipes and seams. If you see growths, irregularities or stains of rust, this means that the inside of the walls leaves much to be desired. With such pipes, the risk of leaks increases at times.

If your apartment has steel pipes,try to remember when they were mounted. If the pipes are more than 20 years old, the risk that they will cause a flood significantly increases. The fact is that the service life of steel pipes should not exceed two to three decades.

Pay attention to the shade of water at the fillingbathroom. If it has a brownish tinge, then your steel pipes need to be replaced. It is especially good to conduct such a check after a long absence from home. Think, it may still be worth replacing the steel pipes with more modern ones, which will last much longer.

Remember how often you use modern means of household chemicals to get rid of blockages. If you do this systematically, the risk that the pipes will leak will be very likely.