Tip 1: How to learn to feel the dimensions of a car

Tip 1: How to learn to feel the dimensions of a car

It is safe to travel and make maneuvers on The car without knowledge and sense of dimensions is impossible. In a dense stream, you need to be able to rebuild, without hitching on other cars, park in the parking lot without scratching the bumper. What tricks you can think of to avoid these troubles.

How to learn to feel the dimensions of a car

Instructions

1

The feeling of the dimensions of the car is intuitive. In order to know where the hood ends, you do not have to drag on and look at it. But the first months behind the wheel is a period of adaptation not only to the road situation, but also to the car. It's hard for a newcomer to feel overall dimensions car without any visible from the passenger compartmentidentification signs. It comes with experience. But there are moments that need to be considered if you want to drive in a narrow place or park in a confined space.

2

All newcomers on the road give out their desire sopull out your neck to see the asphalt in front of the car. It seems to them, it's easier to control the distance in front of another car - to see your bumper. But paradoxical as it may sound, on the road you do not need to look at the road in front of you, only for the future. And the front bumper, with all diligence, can not see. It is necessary to understand that it is there, it protrudes slightly forward and therefore the distance before The carm or obstacle is respected taking into account the bumper. You can cut a bumper antenna, which will be clearly visible from the driver's seat and indicate where the bumper ends.

3

It is more difficult to feel the car while drivingin reverse. If the car is a hatchback, then you can focus on the rear brush. If the car is a sedan, then you can also cut the antenna into the rear bumper so that it can be seen from the driver's rear-view mirror. When parking, you can adjust the mirrors so that you can see the wheels. On wheels it is easier to calculate and see the distance to the obstacle, especially if it's a curb.

4

Lateral overall dimensions car body can be determined by the siderear-view mirrors. The most extreme part of the mirror body is the width of the car. Therefore, when you need to drive through a bottleneck or park the car in parallel, focus on the edge of the mirror. Estimate the distance between the object and the edge of the mirror. Even if you feel that you are going very, very close, it's okay. There is still an acceptable distance to the object.

5

When rebuilding in a dense stream, it is not importanthook on the car going behind. And for this it is necessary to estimate the distance to the car driving behind you and take into account the length of your car. If in the side mirror you perfectly view the car for you, then you can start the rebuilding. If only part of the car is visible, then it is too close to you.

Tip 2: How to get used to the dimensions of a car

Buying a new car is not only a pleasant event, but also a cause of stress. At first, it is difficult to get used to new dimensions, this applies to beginners and experienced drivers.

http://www.freeimages.com/pic/l/y/ya/yasinvar/953320_90665120.jpg
Particularly difficult to get used to the size of the car in the event of a change in the location of the steering wheel, however, replacing a conventional car with a machine of much smaller or larger dimensions is also a lot of trouble.

Where to begin?

First of all, you need to check how convenientthe driver's seat is located. It should not be too low, it is enough to raise it slightly to increase the visibility and improve the feel of the dimensions of the machine. Carefully adjust the mirrors, especially if you changed the right-hand drive to the left-hand drive or vice versa. Very accurately adjust both side mirrors to see the road markings. Do not forget about the mirror in the cabin, adjust it to reflect the change in the height of the driver's seat. On the side parts of the bumper it makes sense to attach the LEDs, they well help to determine the dimensions of the car in the dark.

Practical exercises

Take the time to practice. Build from the light boxes something like a gate and try to drive through them. It is worth giving this lesson a couple of hours. If you feel that you can easily cope with the task, reduce the distance between the boxes and increase the speed. Approximately the same principle, you can learn to park a new car - it's enough to designate the boxes with boxes the space in which you need to drive in. Try other exercises. Draw a line on the asphalt, and then try to approach it closely, but do not touch the wheels. If this exercise seems too complicated for you, again, use boxes or plastic bottles. This exercise should be performed until you can easily and quickly determine the distance between the wheels of the machine and a similar stop line. This exercise can and should be done not only for the front, but also for the rear wheels. There are other effective exercises. Draw chalk straight lines from the front wheels of the car about seven meters in front of them. The lines must be parallel. After that, sit behind the wheel, look at any fixed object that is constantly in front of the eyes (a ledge on the dashboard will fit), tie this object to the line drawn from the right wheel, then mark the position of the left wheel in the same way. This exercise allows you to feel the dimensions of the car. Try to move a little from straight lines back, and then again to drive them with wheels. Complicate the exercise, move back with a shift to the side and return to the line again. Combining all these exercises allows you to very quickly solve problems with getting used to the dimensions of the new machine.