Tip 1: How to find out the car's code
Tip 1: How to find out the car's code
When the car battery is disconnected, it becomes necessary to enter code in the car stereo. It's simple, if code recorded in a special place or saved instruction with a sticker. But there are situations that codebut not.
You will need
- - radio tape recorder,
- - the serial number of the radio tape recorder,
- - a computer,
- - special program,
- - metal pins,
- - VIN-number of a radio tape recorder,
- - documents for the car,
- - phone.
Instructions
1
If the car stereo is native, then you can contact the official dealer center. It will be necessary to provide documents for the car. There is an opportunity to learn code by phone. Then you will specify your details and ask to name the VIN-number of the radio.
2
Otherwise, remove the radio from the socket. This can be done with four metal objects, pressing them around the perimeter of the system.
3
Inspect the device carefully. Sometimes code record and glue to the body of the radio to not forget. Maybe you have done the same.
4
If code not recorded on the case, find the sticker where the serial number of the radio is indicated. It consists of numerous combinations of numbers and letters of the Latin alphabet. Write it down.
5
Download and install on your computer one of the programs for generating codea car radio. Run it. Enter the serial number of the device in the special window. Wait until the program displays code on the screen.
6
Install the radio in the car, turn it on. Very carefully enter the received from the program code to unlock. Depending on the type of radio, you have from 3 to 10 attempts. Check recorded and entered codes. If they match, confirm the input. The radio tape recorder will start to work.
7
Record the received code in a safe place. For security reasons, it is not recommended to specify code on the casing of the radio.
Tip 2: Find out the unlock code
When you often walk through the Internet, there isprobability of catching a virus. For the most part, viruses can not harm the operating system or the computer as a whole. But there are viruses called banners. They can lock the computer. And then you will not be able to use it. But this problem can be solved.
You will need
- Personal computer, Internet
Instructions
1
To quickly unlock your computer, you need to enter code. Currently codes for getting rid of banners free of chargeprovide two anti-virus companies: Dr. Web and Kaspersky. To receive it, you need to perform certain actions. Ask for help from friends who have access to the Internet or use the services of online salons. Fortunately, this is no problem. Almost every user has access to the Internet today. Go to the site, always official, Dr. Web.
2
In the address bar, enter a link where you can get code unlocking:
3
If code unlocking not received, then visit the official website of Kaspersky Anti-Virus. Enter the following link in the address bar:
4
After code received, enter it on your computer. Unlock will be done. Never send money to scammers. In this way you will never get codea unlocking your computer. If you send a paid message, you will receive an additional paid subscription to the news, and codebut will not, because scammers have thought through the whole system. You can send messages a thousand times, but codeYou still will not come.
Tip 3: How to enter the code in the car stereo
Car radio - for today indispensableattribute of any car, bus and even a tractor. In travels and while working as a chauffeur, on vacation and in everyday traffic jams, the radio receiver allows to enjoy drivers and passengers with beautiful melodies, thus brightening up their stay in the vehicle.
Instructions
1
Modern car radio is far from the ones thatwere several dozen years ago. They allow you to listen to your favorite music not only on radio frequencies and cassettes, but also with CDs and DVDs, flash drives, memory cards. However, the management of these recorders is quite difficult, and often motorists do not know how to enter code at car stereo, that she earned. We decided to talk about this problem in this article, namely how to introduce code at car stereo car of Volkswagen.
2
Head Unit VW DeltaEnable car stereo. The display shows CODE. Enter using buttons 1, 2, 3 and 4, pressing each of them several times, correct code. Click the up or down arrow after the correct codea. Radio is on.
3
Head Unit VW Alpha CCConnect car stereo SAFE appears. Press the TA and TP buttons simultaneously and hold until the number 1000 appears on the display. Enter using the buttons 1, 2, 3 and 4 the correct code. Click after the appearance of the correct one. codeand the TA and TP buttons and hold them for a few seconds. The same principle includes all car radio series Beta.
4
Head Unit VW Gamma IIITurn on car stereo SAFE appears. Press the M and VF buttons simultaneously and hold until the number 1000 appears on the display. Enter using the buttons 1, 2, 3 and 4 the correct code. Click after the appearance of the correct one. codeand hold the M and VF buttons for a few seconds.
5
By the same principle is introduced code in all the Gamma and Premium series. In some of them, the M and VF buttons replace TA and TP.
6
Head Unit VW Sound 2Enable car stereo. There was an inscription "CODE - - -". Enter with the help of buttons 1, 2, 3 and 4 correct code. Click after the appearance of the correct one. codeand hold the SELECT button for a few seconds.
7
Head Unit VW NewbeetleEnable car stereo SAFE appears. Wait until the display shows 1000. Enter with the buttons 1, 2, 3 and 4 correct code. Click after the appearance of the correct one. codeand the ">>" button and hold it for a few seconds.
8
Head Unit VW Deluxe AudioEnable car stereo. - CODE IN appears. Enter using 1-6 correct buttons code. Click after the appearance of the correct one. codeand simultaneously the MODE and SCAN buttons. Hold the buttons for 5 seconds.
Tip 4: How to install car receivers Sony
Car Receivers Sony is a good quality product. However, you do not always want to pay for a specialist to install a new audio system in the car. This work can be done independently.
You will need
- - insulation tape;
- - Screwdriver.
Instructions
1
Check the position of the polarities beforewill connect the audio system to the battery. This is necessary in order to avoid unpleasant situations associated with deteriorating sound quality, or the failure of a new car radio. If you follow the poles, you will get the most optimal sound power.
2
Select how to connect the car radio. One way is to connect through the cigarette lighter car, and the second - the connection using the ignition switch. Please note that the positive connector of your wire must necessarily be stranded and copper. The recommended length of this wire should be as short as possible, and a cross section of at least 4 millimeters.
3
4
Connect the car radio to the antenna of your car. For this, there is a special blue (white-blue) wire. With this action, note that you can not use the energy consumer more than 300 mA.
5
Install an additional fusedistance 40-50 centimeters from the terminal with a positive charge (+) battery. The fuse will protect the recorder from kinks and overheating. The wire that you will use in this case must be well insulated so that in case of contact with the negative terminal it does not cause a spark and a fire hazard situation. Minus wire connect at close range from consumers of electricity, in any case not resorting to all sorts of twists. Attach the car radio frame to the car console panel.
Tip 5: How to record a car audio CD
Recording a disc for a car stereo is a prettysimple, if you have an idea about the technical characteristics of this radio. This information will help you choose the right type of recording of music information on the disc.
You will need
- Personal computer or laptop with DVD / RW drive, blank CD / R / RW discs.
Instructions
1
Determine the technical characteristics of yourcar radio. They can be found in the operating instructions of the device. Depending on the model and the capabilities of the recorder, various types of recording of music files to a disc are possible. Also, the file formats read by the device, their quality, the maximum possible volume of recorded files can differ.
2
If your car radio has the ability to readonly audio discs, then the choice of ways to record audio files to a blank disc is rather meager. In this case, only one amount of audio data per disc can be recorded, in which the total duration of all songs will be no more than a certain time. Usually this restriction is about 72 minutes.
3
Use an empty CD / R-drive to write CD-audio. You can use either the standard Windows application for writing, or third-party programs such as Nero Express. In order to make a record, you need to insert a disk into the drive and go to the directory of this disk in "My Computer". Copy the necessary files to this directory. Note that the total volume should not exceed the limit specified on the empty disk box. After copying the files, in this window of the conductor, click on the audio CD recording button. Next, you will be offered to rename files, sort them, and rename the disc itself. After that, the Wizard will help you finish the procedure.
4
If the car stereo supports reading the formatmp3, then your possibilities are much wider. The matter is that the majority of audio data, for today, are distributed in this format. Thus, you do not have to convert files, and also limited to the maximum allowable time for the duration of tracks on the disc. Files of this format can be burned to disk at the maximum size, if you need it. Since CD / R-disks have a maximum volume of 702 MB, then the total volume of audio files should not exceed this limit.
5
Insert the CD / R-drive into the drive and open it.the folder of this drive. Copy all the necessary music files to the disc folder. Keep track of the full size of the files. Then click on the write data button on the disk. In this case, you will not be offered those settings that are used to record an audio CD, because with this recording mp3 files are interpreted as ordinary data that does not have a label "music" or "audio".
