Tip 1: How to remove the tint film

Tip 1: How to remove the tint film

Tint film is considered one of the importantCar tuning details. It can greatly improve the impression of the car, create a sporting, aggressive image. However, if the film has become unusable, it must be removed. You can manage this task yourself.

How to remove a tint film

You will need

  • -thermometer;
  • -knife;
  • -heating device;
  • -dishwashing liquid;
  • - a clean rag;
  • - atomizer.

Instructions

1

To remove the tint Film, it is necessary to heat the glass to about40 degrees. To do this, you need a heat gun or, more likely and realistically, an ordinary household hairdryer. For the operation of these devices, electricity is required, so it's best to find an accessible place with a power outlet and put the car there before the process begins.

2

Heat the glass evenly. Do not overheat the surfaces. Otherwise, the glass may crack and crumble. Or the toning will melt down to a patchwork state, then it will have to be scraped off the glass.

3

After the glass has heated to the desired temperature, take the knife and carefully, trying not to break off Film, grab it by the top edge. Be careful and take your time. Missing Film, Then the second time to unfasten it in one piece is unlikely to succeed.

4

It is best to remove the tint from the glass bydiagonal, in the direction from top to bottom. If difficulties arise and the gradual separation of the toning from the glass suddenly becomes impossible, take a hairdryer and warm up the surface again. Repeat the procedure if necessary, however watch the temperature.

5

Inspect the glass after removing the tint. Take a detergent and a rag, gently remove the glue residues from the surface. As a detergent suitable for washing windows, however, as practice shows, it is better to use a dishwashing liquid. For greater effect, dilute the liquid with warm water at room temperature. To wet the glass with a cleaning liquid, the spray gun is best suited.

Tip 2: What are the first results of the struggle of the State Traffic Safety Inspectorate with tinted cars

On July 1, 2012, amendments to theTraffic Laws. They also touched lovers to travel in tinted cars. Now the opaque film on the windows is forcefully forced to remove the car. Otherwise, the driver runs the risk of losing registration numbers. The first results of the fight against toning were brought in two weeks after the beginning of the road reform.

What are the first results of the struggle of the State Traffic Safety Inspectorate with tinted cars
For the first half a month after joining the legalthe force of amendments to the Rules of the road in July 2012, traffic police stopped on the roads more than 4,000 cars, the glasses of which were covered with a tint film. In most cases, penalties for them were applied directly on the spot. Drivers filmed the film and received a protocol to pay a fine of $ 500. In more complex cases, when the tint was too dense and almost nothing was visible through it, the registration numbers were twisted from the machines until the violation was completely eliminated. True, motorists who love dark glass too much turned out to be around 400. It should be taken into account the fact that if the owner of a vehicle over-tinted will decide to remove the toning right next to the traffic police officer, he will not have the numbers taken away. But he will have to remove the tint film on his own, for which penknives, coins, etc. are used. All these objects scratch the glass very hard. However, if he wants to do this in a car repair service, he is given exactly 24 hours to fix the violation and get his numbers back. By law, it is allowed to apply a tint film with a light transmission of at least 70%. It should be remembered that this rule applies only to the front and front side windows. As for the rear side and rear windows, they can be toned and darkened. As a result of the ongoing fight with the tinted glass has its own statistics and for motorists. According to their observations, the number of small thefts from cars increased almost 1.5 times. Owners of cars attribute this fact to the lack of toning, because now it's easier for criminals to examine what lies in the car. And, naturally, they are more often tempted to pull something out of the car left in the parking lot.

Tip 3: How to wash the tint from the glass

There are two ways to remove toning: contact the service center or get rid of it yourself. Of course, the simplest and most reliable way is to contact a specialized center where professionals can quickly and easily remove toning from the car, but it will have to be paid for. And as this pleasure can not afford to every car owner, you can use the second method and remove the tint film yourself.

How to wash off the tint from the glass

Instructions

1

At first glance it seems that the very procedure forremoval of the film is very simple and does not require special skills. All that is required is to hook the film with a knife or a blade and separate it from the glass. But here you can not ignore some features. The very tint is attached with a special glue to the glass, and if it is not removed correctly, the remnants of the glue paste can become a real problem, collecting dust and fixing fingerprints on the glasses. And get rid of this glue is very difficult.

2

Before removing, the film must be heated,so that the adhesive is removed together with the polymer layer. To do this, a building hair dryer is used, but if it is not there, then you can take the usual one. It is important to remember that the hairdryer can not be placed close to the glass, otherwise the glass can crack. Remember that the temperature should not exceed 40 degrees, otherwise the film may melt.

3

After heating the film removal siteIt is pierced by a blade and carefully pulled down from top to bottom towards the car door. Take your time, warm up the tint with a hair dryer for no more than 10-15 centimeters, then pull the polymer down to the same 10-15 centimeters and heat again.

4

If some glue still remains, then fromIt can be disposed of with a glass cleaning agent with alcohol in the composition or with the aid of a cleaning solution, which is used mainly in the service centers. When choosing a cleaning solution, pay attention to the composition, you can not take those that contain phenolic compounds.

5

Chinese tint films that differvery thin polymer and a relatively light-transmitting capacity, you can try to wash off with a solution of ammonia and ordinary household soap. Simply apply the liquid to the waffle towel and leave it on the glass for 10 minutes, then rub it with a sponge to wash the dishes, if the toning is washed off, continue removing, if not - your choice is a hair dryer and patient pulling the film.

0