Tip 1: How to tear off the old sticker on the inspection from the glass

Auto

Tip 1: How to tear off the old sticker on the inspection from the glass

Stickers from the ticket of the technical inspection on the glasses todayalready a rarity. The ticket itself is not required today, so it is no longer hung on the glass to avoid questions from the traffic police. However, there are those who could not abandon such a tradition, so the question of what to clean off the sticker remains relevant for them.

Ways how to clean the sticker off the windshield is pretty much. And you can choose from the whole list the option that is right for you.

Choosing a way to clean glass from the label of the couponTHEN, carefully weigh the pros and cons. So, for example, if any chemical agent provokes the slightest irritation, then special compounds will not work.

How to remove from the windshield sticker from the ticket TO

One of the simplest ways and at the same timerather inexpensive - the use of ordinary water and sponges. The only thing - the water should be hot. Dip the sponge and, without pressing, attach to the sticker. Then gently with a cloth harder or with a special ice scraper, scratch the top layer of the sticker. Then repeat the procedure. When you reach the sticky layer, add a little proven detergent into the water.

Do not rub the glass too much, and do not use powder cleaners - you risk scratching the glass, the replacement of which will cost you a decent amount.

In the box of folk recipes there is one. Use a baby cream to remove traces of the sticker from the glass. It is quite greasy and allows you to quickly soften the adhesive base of the sticker. Some home experts say that a regular cream, and not just a baby cream, will do. The principle of cleaning is quite simple: first apply a layer of cream on the sticker and do not hesitate, let the layer be fat enough. Then, carefully remove the sticker with a special scraper. Also, to remove stickers from glass, special tools are used, which should be used strictly according to the instructions. In addition, various solvents, vegetable oil, antistatic agent and much more are successfully used. If possible, a conventional hair dryer can be used. Set it to the most hot mode and start blowing on the sticker. Under the influence of heat, the adhesive base melts, and the sticker easily leaves, leaving no trace on the glass.

What is worth considering

To tear off a sticker from a glass it is necessary very muchCarefully not to damage its surface. Scratches and cracks clearly did not decorate, and in addition, will interfere with the normal review during ezdy.Esli you want to work with chemicals, be sure to follow all safety rules and choose to do is not a hot day, but cool. This will avoid otravleniya.Ne try to use all means in a row, even if, in your opinion, one can not cope. From the mixing of components, something strange and not always beneficial to health can occur.

Tip 2: How to blow glass

Glass-blowing craft has a rich history - withFor a long time, the master glass-blowers created skilful and beautiful glass vessels of various shapes, surprising the refinement of their products around them. Today, the technology of creating glass handmade objects has become more perfect than before, but the general stages of manufacturing glass vessels by different vessels have remained the same.

Instructions

To make a glass object to startit is necessary to melt the raw material for the glass mass in the fire. Collect glass in a special tube for blowing glass, then turn the tube several times between the fingers to distribute the mass inside it.

Blowing a ball out of the tube, watch for whatthe air is sucked in by force to blow out the glass canister exactly the size you need. While the glass preform has not cooled down, it must be placed in a special wooden form moistened with water.

After placing the cylinder blank in the mold, continueblow out the glass so that it takes on the same shape as your wooden pattern. After the glass in the wooden form has cooled, it must be removed, and then proceed to work on grinding and finishing the shape of the glass product.

Use the grinding wheel to achievethe necessary shape and design of the glass vessel, so that its real appearance corresponds to a pre-thought out sketch. After grinding, the next stage of machining the product is a thread requiring high precision and fine work.

A finished product covered with the necessary reliefs andpatterns, you can additionally cover with a thin layer of gilding, which will emphasize the elegant lines of thread on the glass. In addition to gold, patterns can be created by etching. Gilded areas polish with agate or hematite bars.

Tip 3: How to open a vehicle inspection station

On the roads of our country, a largenumber of cars. Each of them periodically passes a technical inspection in the traffic police, breaks down or just needs a preventive check. What do car owners do to make sure that everything is in order with their car? They go to Station maintenance. It is this service that is most in demand today in the car market in Russia.

Instructions

Your desire to pursue your own automobilebusiness deserves all praise. It is this service that is most in demand today in the car market in Russia. You have financial and technical data to open your own maintenance station, then you need to use it. In order for the opening of your inspection station to pass quickly and smoothly, remember a few key points. The competition in this area is quite high, but the number of cars is growing year by year, so you will not remain without work.

Start your business by choosing a location for its placement or construction. Territory of the site for the enterprise inspection cars must be at least four hundred. According to the existing requirements of the law, the construction of a car service and maintenance stations should be carried out for 50 meters from living quarters and reservoirs.

It is better to have such services closer to busy highways, intersections and roads. This will help spread information about your services to motorists. Plot for Station you can buy or rent.

If you are serious about organizing yourauto business, prepare to coordinate all your documents with a number of serious instances - the fire department, sanepidstanstvo and traffic police. Develop an assortment of services that your station will provide inspection, and make a business plan for the enterprise.

Select the necessary equipment fortechnical diagnosis and repair of cars - do not skimp on purchasing the latest equipment, because new cars, stuffed with electronics, are becoming more and more.

Invite experienced mechanics to work and set them a decent salary so that they do not work in their own garages in the evenings and weekends. Your station's reputation inspection will largely depend on its employees.

Tip 4: What you need for a vehicle inspection

State inspection of technical conditionThe car is needed in order to determine the conformity of the vehicle to the established standards, technical safety standards and relevant operating rules.

To successfully pass a technical inspection, in the firstqueue is required to collect the necessary package of documents. It must include a document proving your identity. If the passport at the time of passing the inspection is lost, it will be successfully replaced by a temporary certificate, which you can get in the internal affairs bodies. If you are in the military service, you will need to show a military ticket, as well as a certificate of registration. The next mandatory document is a driving license. It should include special marks permitting the driving of the vehicle provided for technical inspection. The presence of a document confirming the right to own a car depends on who brought the vehicle for inspection. If the car is accompanied by its immediate owner, it must produce a document that will confirm its right to dispose of the vehicle. If the inspection is carried out by the person to whom the power of attorney is issued, then it should be presented. Also, a mandatory item on the list of documents necessary for technical inspection is a certificate of registration and a transport ticket. Having collected the necessary package of documents, it is necessary to pay tax on the vehicle. This must be done before applying for a vehicle inspection. Attach the receipt to the necessary documents. In addition to the documents in your car, you must have the necessary security elements. These include: first-aid kit, in which there is a complete set of drugs with expired shelf life, a working fire extinguisher, an emergency stop sign that meets all the requirements described in the rules of the road.

Tip 5: The better to wash the glass: folk recipes

You can wash the glass with a simple soap solution, andafter being processed by old newspapers. To achieve radiant cleanness will help ammonia or vinegar, which must be mixed with water. Clean the surface of dirt and dust is capable of ordinary starch.

To achieve crystal transparency of glasses it is possible andwithout special expensive means. To help people's recipes come, for the preparation of which you do not even have to run to the store: everything you need can be found in the closet in the kitchen.

Recipes

The simplest and most popular recipe for washing glassesis a composition that has in its composition only two components - water and ammonia. They must be mixed in a proportion of 1: 4 and evenly treated the entire area of the glass surface. To dry it is better to use not old clothes, but old newspapers. Equally effective is a mixture in which instead of ammonia is used ordinary vinegar. Such a composition can be used to wash any glass surface, including mirror glass. Contaminated window or automotive glass will clean ordinary salt. It should be applied neatly to the surface to be treated and then rinsed off with water. In ancient Russia, it was wrought from time to time to wash the windows with old soft rags soaked in a usual soap solution. After the surface was treated with a liquid agent consisting of chalk and water. The glass was dried and the resulting white stains were removed using old newspapers. To wash a thick layer of dirt and dust, ordinary potato starch is capable. It is necessary to add one tablespoon of the product in one liter of water, mix well and apply to the glass. After washing, use a suitable cloth dipped in plain water.

Features and secrets of glass processing

If you want to wash the glass in a cold frostyweather, vodka will help out. It is necessary to add a little strong alcohol in the water for washing - this will avoid freezing of liquid on the surface being treated, which means that wiping it dry will also not cause problems. If in the cold season glass in the window opening strongly sweats, the proceeds will come bleach. If you do not want to inhale unpleasant vapors of bleach, you can replace it with normal soap. It is necessary to put a soapy solution, add glycerin there and wipe the window with this compound. And glycerin, as well as vodka, is able to protect the glass from icing. Glass oil can also be used to mirror glass. Having dripped some oil on a soft rag you need to process the glass surface from two sides, and it will play with all the colors of the rainbow. And if it's still decided to use industrial means, then you need to remember that in no case should you mix several different means. It is always worthwhile to use only one product purchased in the store.