Tip 1: How to choose the right speed bike
Tip 1: How to choose the right speed bike
The number of motorcycle models presented on themarket, very diverse. It is almost impossible to find two identical ones. Before buying, you need to decide for what purposes you will use this vehicle.
Do not overestimate your abilities
One common mistake among beginnersis buying a motorcycle with much more power than necessary. Do not choose a "rocket on wheels". Especially, it concerns something with an engine more than 600 cubic centimeters. When you learn to ride a less fast vehicle, then sharpen your skills and gain experience. Then the time will come when you can buy a faster motorcycle.Be guided by your needs
Will you drive around the city? Traveling long distances? Motorcycles come in different shapes and sizes, and you should consider your desires when choosing. Think about how you will use it. For example, if you are looking for a motorcycle for riding on weekends, your choice may fall on some exotic model that can be very uncomfortable in everyday use. Understanding your needs will make choosing a future motorcycle much easier.Choose a motorcycle that suits you in size
This feature is less obvious thanit could seem. Motorcycles come in completely different shapes and sizes, just like human bodies. Pay attention to the size of the motorcycle, and, if possible, do a test drive. You will very quickly realize that ergonomics and driving sensations are dramatically different for different motorcycles. Riding on some sports bikes can greatly strain your wrists. Others may like you because of the low center of gravity and, as a consequence, good handling. You will not be able to figure out if this or that motorcycle suits you until you try to sit on it and ride a little.New or used?
There are many features associated with new andused motorcycles, and there is not one "right" choice. The decision is completely individual, and depends on personal preferences, not to mention finance. New motorcycles are provided with warranty service and repairs, although you will pay a certain amount for it. Used motorcycles are ideal for beginners. The new owner, as a rule, is less worried about damage, because the equipment is no longer in perfect condition. Used motorcycles are usually cheaper than new ones, since they are already depreciated, although they may be more expensive in the long run.Do not rush to buy
The acquisition of a new motorcycle isAn exciting event, but do not be too hasty. If you see a motorcycle and immediately want to buy it, make sure that you will enjoy it after the first joy passes. Used motorcycles should be checked by a professional mechanic before buying. Learn as much as possible about the model that you decide to buy, and take into account all factors - economic and practical. Otherwise, you can greatly regret the acquisition.Tip 2: How to remake a moped
Having set out to improve moped or scooter, carefully consider all the consequences of such modernization. In the main refinement of the engine mopedbut to improve the speed of the technical means. Forcing an engine is an occupation that requires a certain skill, skill and skill.
You will need
- - a set of metalwork tools;
- - sports variator.
Instructions
1
Determine your financial capabilities to upgrade the propulsion system mopeda. Making design changes to the engine can cost you several thousand rubles or more, depending on the cost of parts that you will additionally install on moped.
2
With minimal engine modification, removeLimiter of maximum speed and replace the weights of the variator. You can buy the weights in a store that sells spare parts to motorcycles, or you can cut it yourself.
3
In addition, bore a piston cylinder up to 44 mm. Do this for professional. Increase the volume of the cylinder will increase the speed of movement mopedbut up to 60 km / h. In addition to increasing the speed characteristics of such a design change improves the dynamics of speed dialing.
4
If there is a financial possibility, replacepiston engine group for a similar, but with a large volume, up to 70 cubic meters. see Equip the upgraded engine with a sports variator that has a higher gear ratio. The speed of movement will increase to 65-70 km / h.
5
For more advanced modernization mopedand increase the piston group to 80 cu. cm and dissipate the engine cylinder under the piston with a size of 50 mm. In addition, replace the cylinder head with a new one equipped with enlarged valves. Make changes also to the carburettor, increasing the jet. A similarly engine-boosted engine mopedand will be able to develop a speed of up to 80 km / h, but the wear of parts will increase, which will shorten the life of the engine.
Tip 3: How to choose a helmet
Riding a motorcycle without a helmet is a bad idea. After all, he protects his head in the event of an accident, falls, protects his eyes from the pebbles flying out from under the wheels. But how to choose the right one helmet among a huge range of products offered?
Instructions
1
If you have a sports bike, buy an indoorHelmet type "Integral". It is optimal for protection, with good aerodynamics and soundproofing, but quite heavy. People who wear glasses, this does not fit.
2
To the optimal in terms of protection are helmetstype "Modular". This is a compromise between open and closed, so it is suitable for those who travel with glasses. In some models, you can remove the chin part, then the helmet becomes open.
3
If you drive not too fast and the main thing foryou are not protection, but a review and good audibility, buy a helmet three quarters. It is open and quite light, with eye protection. These are often used to teach motorcycle riding.
4
The lightest helmets are half. But they do not protect the eyes at all, because in such models there is no glass. But at the price they are quite acceptable. So if you are sure that your ride will be trouble-free - stop by this model.
5
The material from which the helmet is made is also prettyimportant. Two versions of these accessories are available: fiberglass and thermoplastic. The first serve longer, they are easier to protect, they are adapted for coloring, stickers stick well to them. But the second is cheaper and lighter in weight.
6
Be sure to try on helmet, which you want to buy. He should sit tightly on his head, do not crush or dangle when you move your head. Try to stick a thumb between the helmet and the forehead. If it did not work out, it will fit you. Please note: the fastened chin strap should also sit tight. Walk around in the helmet for about 5 minutes. Only this way you can understand if you will be comfortable wearing it.
Tip 4: How to choose a spinning spool
If you decide to try yourself in spinning, it can turn out that when you come to a specialized store, you are simply lost before a huge selection of accessories for spinning. Take, for example, coils for spinning: all seem to be the same, and the prices for some reason are different. There is a reasonable question, what functions of the coil are needed for you, and what should be paid attention to when choosing so as not to be mistaken.
Instructions
1
The first thing that we most often pay attention to when choosing any thing is the country of manufacture. It may happen that you come to the store for a snap-in for spinning German or Swedish firms, and you come acrossthe fact that the products are each familiar brand "made in China" (Asia, Malasiya). Do not let this frighten you, just remember that in the same Germany or Sweden, the parts are made, and the products are already assembled in China or Asia, this does not affect the quality in any way.
2
Connoisseurs spinning the coils are divided into speed and power. If you choose high-speed coils, then note the high degree of their sensitivity, in the process of catching you will feel the rotation and balancing of the coil. The design of high-speed coils implies ease of operation, it is enough only simple movements of your fingertips.
3
Preferring power coils, remember,that such are useful for catching large fish, they are made with the expectation of high loads, will show themselves well in the long struggle with fish. One of the distinguishing features of coils of this type will be the presence of a strengthened handle with a large shoulder, also there will be a thickened leg and a particularly sturdy handle. You can press hard on the handle, fearing that the product will break.
Tip 5: How did the Speed Dial Championship go?
The American National Speedway Competitiona set of SMS messages this year was held for the tenth time. Participants used push-button phones - LG, the sponsor of the event, for some reason does not want to keep up with the times and move on to the contests on the touchscreen. Perhaps, it is for this reason that the winner of the competition and this year was the last year's champion.
