LovesTheTeam.com

You will need

• Documents for the car, personal car, Internet access, telephone.

Instructions

1

First, look at the technical documentation foryour car. Any self-respecting dealer will indicate in the documents the complete set. Of course, this step implies that you imagine what a bundle is. A bundle is a set of options that are included in the device The car. As a rule, there is a set by default -the so-called basic equipment. Further auto dealers offer to equip your car with additional features. And as they are added, the car changes from basic to top-end equipment. For your own part, find out what kind of equipment your car has, if you know the decoding of the VIN number of the car.

2

Look at your car for a VIN number. If you can not find it yourself, contact the car service center. If you did not find the VIN, then see the factory document on the car.

3

Contact the service center. You can call, but it's better to drive up. By dictating to the manager the VIN number or showing the factory document, you will get a detailed description of the equipment of the car.

Instructions

1

First determine the car's equipment according to its technical passport. However, such characteristics are not available for all types of passports, depending on the standards of different countries.

2

Define the VIN code (Vehicle IdentificationNumber) of the car. Such a code is available for all vehicle data sheets. It looks like a long set of different characters, consisting of letters and numbers arranged in one row with no spaces. The number of characters can be different, but a maximum of 17 units.

3

Look also at the car body, on the leftThe front rack of the car or on the instrument panel, its upper left part. The last location allows you to see the number through the windshield of the driver's seat.

4

Consider carefully the VIN code. The first three digits miss, but the next six digits pay close attention - it is for them to know the complete set of cars, for example, the type of engine, body, etc.

5

Consider carefully the VIN code. The first three figures miss, but for the next six pay close attention - it is for them you can find out the complete set of cars. For example, 5GR GN23U 6 5H112741 - this code will mean that this is a HUMMER car, a five-door station wagon that has seat belts, as well as an airbag for the driver; The petrol eight-cylinder engine, with a capacity of 321 horsepower.

6

Use the decryption table for pr-codesComplete sets of auto. In this table, in the left part of it, there are codes consisting of three signs, on the right side there is their decoding, for example, 8WD - fog lights.

7

Use special databasescars. There are a lot of them on the Internet. In the highlighted box, enter the VIN code of your car, and the system will give full comprehensive information about the equipment of the car.

8

Use the services of mobile operators. Send SMS to the short number of the respective companies. After a while your request will be processed, and you will receive data on the equipment of your car. Please note that not all organizations provide this service, and it is paid.

9

Ask the salon specialists for assistance in determining the configuration of the new car. Employees will provide the full information you are interested in.

Instructions

1

Before buying a lens, be sure to takea camera. It is also desirable to take a flashlight and a laptop to test the quality of the images and lenses. You can print special targets to check the focus and the sharpness adjusted through the lens. Preliminary study models of lenses on the Internet, their parameters and possible problems. Identify specific products that you would like to test.

2

When you come to the store and select the correct optics, checkIts complete set. In one complete set with a lens, lids, a lens hood, a warranty card and instruction manual should be supplied. Some models are completed with a cover.

3

Take the lens and carefully study itbody and lens. Pay attention to scratches, scratches, cracks or marks of bumps. Some sellers are trying to sell the lenses that were in use, as new, and therefore should be as carefully as possible. If the product has scratches or marks of use on the filter threads, it is best to set the lens aside and pay attention to other models.

4

Twist the wheels to focus and zoom. All rings should rotate easily and smoothly. If available, check the switching sliders for the focus mode, turn on the stabilizer, and so on. Shine the flashlight at an angle to the lens and estimate the amount of dust that could accumulate inside the device. New optics should not have a lot of dust inside the case.

5

Place the lens on the camera. The gap between the lens and the bayonet of the device should be minimal. Check the focus, stabilizer. Take a couple of test shots, using printed targets or shooting other objects. After shooting, connect the camera to the laptop and view the received pictures in detail. Check the sharpness settings, change the shooting modes. If the result you are satisfied with, you can purchase the desired lens.

Instructions

1

Having chosen a smartphone, first check itAssembly and build quality. Carefully study the body of the device for the presence of gaps and lumens in the area of ​​fastening parts. If there are buttons on the unit, check their progress. Are they too tight and do they respond well to pressing.

2

Most modern smartphones are presented withTouch capacitive display, which must clearly respond to pressing with your fingers or stylus, the latter must also be securely fixed in the body of the device and be easy to handle.

3

Check the display quality and qualitydisplayed on the parts screen. A good smartphone should have a screen that clearly displays all the graphic elements. The display should not have a graininess phenomenon, which is characteristic of inexpensive or counterfeit devices.

4

Examine the device functions and speed. The main distinguishing feature of smartphones is the ability to run several applications at the same time while providing a high level of performance and minimum delays in processing certain data. Run several programs installed on your phone, then minimize them and switch to the main screen or to other applications. A qualitative device should be clearly responded to such operations.

5

Check the configuration of the smartphone. In the complete set with the device there should be a qualitatively printed instruction in Russian. If the booklet in Russian is missing, then the phone was not intended for sale in Russia and it is likely that it was imported into the territory of the Russian Federation illegally. The kit must contain the original cable and charger with the company logo.

6

Observance of all the above instructions will help you to get a really high-quality device that will last you a long time.

Instructions

1

Find out the serial number of the iPad. This number is written on the package itself after the word Serial and consists usually of 11 characters. Go to the official Apple website and in the "Support" tab, find the "Checking the right to maintain and support" section or follow the link at the end of the article. Enter the serial number in the corresponding field.

2

If the iPad is a fake, then the system is notwill find such a "serial" in its database. If the device is still original, a message will appear on the screen indicating that the warranty information is not available, since the device was not activated. This message confirms that you are the first owner of this iPad. In the case, if the device was already subject to repair and someone used it, the result of the search will be information about it.

3

After checking the serial number on theBox was successful, you can congratulate yourself, but it's too early to relax. Often cases where the box and the device do not match. Therefore, it is necessary to open the package (it must be sealed in polyethylene) and check the serial number on the iPad with what you just checked on the Apple website. If the sets of numbers do not match, then, of course, you hold a fake in your hands.

4

Check the equipment. If the iPad is real, then the box should have: a USB adapter, a charger (the plug itself), two Apple stickers, an instruction in Russian. No headphones and additional bonus accessories, however it is nice, there should not be. Also, if you buy an iPad with 3G, then carefully inspect the back panel for an antenna: at the top of the device you will see an insert (it should not bulge).

5

Ask the seller after (or better before) the paymentPurchase activate the iPad. or do it yourself, without leaving the store. The serial number on the device itself can be found in the "Settings" section by selecting "About this device" in the "Basic" tab. In this case, if you do not notice something, and you did not manage to properly check the iPad for originality, you can immediately file a claim to the seller for the quality of the goods and get the money back.

Checking the device before turning it on

The first thing to be carefully examinedfactory packaging. It should not be dented or torn. This ensures that the device has not been damaged in transit, and also makes sure that the box has not been opened, and this is a new device that was not returned by the former user. Check the configuration of the tablet. The set must necessarily include charging, often a USB cable is attached; Some memory cards include a memory card, an OTG cable, headphones, a case (at the discretion of the manufacturer). A complete list of components can be found in the attached documentation. It is desirable to check the operation of the charger so that after coming home there was no surprise. Carefully inspect the case of the tablet for any mechanical damage, scratches, chips, etc. Check that the glass is not moving away from the case. Slightly squeezing gadet in different places, make sure that there are no creaks. Next is to evaluate the serviceability of the screen. While the device is in the off state, take a closer look at whether there are no lights or light points on the display. If there are defects, you have every right to request replacement of the device.

After switching on

Now turn on the device and assess the serviceabilitymatrix screen. Faulty elements on the dark screen will glow white or, conversely, on the light screen - dark. The "broken" pixels are a good reason to replace the gadget. Include the tablet yourself, without the help of the seller. Be sure to make sure that the touch screen does not have insensitive zones. Start the applications whose controls are in different zones of the screen. Turn on one of the tunes preinstalled on the tablet - with sound speakers, the sound should be loud enough, without rustling and crackling. If the store has a wireless Wi-Fi network, it makes sense to check the operation of the radio module Check the camera of the device by taking a few pictures. Make sure that there are no "dead zones" on them. Such defects indicate a malfunction of the photosensitive matrix. Usually the tablet is ready for use after you get it out of the box. That is, there is already some software. Also note the support for this Google Play device - older versions of Android OS often fail when accessing the application store.

Instructions

1

Not all electronics stores areThe formula "the customer is always right". Therefore, when buying equipment, check the availability of a quality certificate and a manufacturer's warranty. Check with the store administrator whether it will be possible to return or exchange the TV in case the defect is found out at home.

2

If you find a suitable store and choseTV, it is necessary to check the packaging and equipment. Carefully inspect the protective film on the TV. Check the presence of the remote control, cable and documentation.

3

If the protective film has already been removed, but on the casevisible scratches and other damage, it is worth to abandon the purchase. Most likely, such a TV was already under repair or it was a "display case". Such a model should be sold with discounts and corresponding marks on the price tag.

4

Before going to the store, download anya carrier of a selection of test images for testing the TV. When buying, connect the USB flash drive to the device. Turn on the TV and select the media player mode from the menu. Turn on image browsing and test the display. Full-screen images of different colors help identify bad pixels. On a monophonic background, a "broken" pixel is similar to a black non-luminous point. The "hot" pixel on the screen has the form of a color point, even on a black image.

5

Black background makes it possible to detect unevennessbacklight. If you notice a lot of bright spots on this background, then you need to refuse to purchase such a TV. When viewing your favorite movie, bright areas will create discomfort. In addition, many TV manufacturers do not consider such a backlighting a defect. An image with a white fill will help you identify the presence of color spots on the TV screen. Such a defect is called "tint" - the color in the matrix, which is present on top of the main picture.

6

You can also check the speakers built into theTV. With a bad sound, you do not get the joy of watching your favorite show. Therefore, launch a melody on the TV with a USB flash drive and listen carefully. The speakers should not wheeze, the sound should be clean when playing.

7

Many modern TVs have a built-inWi-Fi. In the store, connect to the network and check the connection. Try downloading the page on the Internet. If there are any difficulties with the connection, please contact the seller for assistance. If the built-in Wi-Fi works, the TV will display the page.

Instructions

1

One of the most common defects is the shell creak. Press in various places on the body Phone, primarily in the volume and lock keys at the ends of the device.

2

If the phone is equipped with a stylus, check - the stylus should firmly "sit" in the corresponding box and do not fall out when the device shakes.

3

Also check the screen Phone. Turn on the device, inspect the screen for the presence of problem pixels, you can do this, perhaps without special photos with different colors, because You may not be able to insert your memory card.

4

Carefully check the operability of all the keys on the keyboard, for example, by typing the sms test of the message. All buttons should react to the first click, otherwise problems with contacts are possible.

5

Insert the sim card and check the quality of the speaker and microphone by simply calling it.

6

Check the equipment Phone, check it with the instructions that came with the device, ask for a change in the box if you find something is missing.

7

Finally, check all the documents that arephone, read the warranty carefully. If you know how to look at IME on the phone you are buying, check it with the IME indicated on the box.