How to sew a children's shirt
How to sew a children's shirt
It's nice not only to dress your child inbeautiful and fashionable things, but also to create designer clothes for the baby. This is not only exciting, but also quite economical. One of the most difficult stages in the process of sewing a children's shirt is to create a pattern. There are several variants of cut, and sewing is the same in all cases.
You will need
- - material;
- - lining material;
- - pattern of details of a children's shirt;
- - a needle;
- - thread;
- - scissors;
- - sewing machine;
- - buttons;
- - accessories for decoration.
Instructions
1
Take the old nursery Shirt for a basis as a pattern. Strip it at the seams and get ready-made details, on which you can cut out the new material. The edges of the cut details of the new shirt are treated with an overlock or other kind of stitch designed for edge processing.
2
The second option. Cut out the shirt to the child on the finished pattern. You can use ready-made patterns, patterns presented in specialized magazines for cutting and sewing, or you can make a pattern yourself. Using any of these methods, do not forget to leave two centimeters of stockpiling in the stock during the cutting process, when the product is stuck. Cut the product in the direction of the share thread. Uncrossing the material, start sewing.
3
Unbend the allowance for processing the fastener on the wrong sideshirt and swipe. Prepare cut out flops. At the top of the shirt, sweep two soft wrinkles. Sew the coquette to the back of the shirt in a seam suture. To the face of the lower coquette, place the shelves on the face and sew them. Cut the upper coquette of the coquette and sew it to the edge.
4
Prepare collars with a gasket. Sew the upper and lower collars, and press the seam. To the top collar, sweep the gasket, sew the top and bottom details of the collar, cut off the corners, unscrew, smooth, and then detach.
5
Prepare the rack with the gasket. On the face of the top rack, place the bottom collar on the face, and on the face of the top collar, place the bottom rack with its face. Sweep and sew, not sewn up the rack below the width of the allowance on the seam.
6
On the underside of the shirt, put the bottom side of the bottom of the rack, overlapping the middle. The free edge of the lower rack is bent and sewed into the edge.
7
Process the bottom of the sleeves. If the sleeve is stitched into a closed armhole, its lower seam is sewn, and the shoulder zone is assembled into two machine stitches. If the sleeve is sewn into an open armhole, then the side seam of the shirt and the lower seam of the sleeve are not sewn. The shoulder zone of the sleeve is collected in two lines, combining the middle of the sleeve with the shoulder line, and the sleeve is sewn and sewed. The slices are processed together, and then the lower seam of the sleeve and the side seam of the shirt are sewn. Do the same on the other side of the shirt, sew the sides of the product.
8
Sew and cut the buttonhole. Sew the buttons. If desired, you can decorate the product with stickers, stripes or embroidery. Products iron. The shirt is ready.
