Tip 1: How to make a barrier for a baby bed

Children

Tip 1: How to make a barrier for a baby bed

The barrier for a cot is designedEnsure the safety of the baby both during his sleep and during the waking period. This limiter should be easily lowered, opening direct access to the child. There is a method of making a "soft" rim made of fabric and foam rubber.

A cushion for a child's bed can be made by own hands

The barrier for a child's bed should be safeFor the kid: the wood is covered with ecologically pure varnish, the fastenings of the rim are hidden under the mattress, the rails are of flowing shape, the fabric is pleasant to the touch and easily washable. It is easier to make a "soft" barrier with your own hands. It is more convenient for both parents and baby: it joins racks with Velcro, protects from draft and sunlight.

What will it take to make a barrier to a baby bed?

For sewing a soft edge in the first placeyou need to choose a fabric. It should be non-mark, non-slip, easy to wash, have a beautiful coloring. For the manufacture of a barrier length corresponding to the perimeter of the crib, on average, it will take 5-5.5 m of fabric with a width of 110 cm. Before starting the cutting, the material must be washed to make it "sit down". In addition to the fabric fabric, a foam of 1-2 cm thick and zip fasteners of the required length are required.

How to make a barrier for a baby bed?

Pattern is made according to the measurements taken fromBeds. On the piece of paper, record the length and height of the desired border. Draw a rectangle of the appropriate size. Mark allowances for seams (0.8-1 cm) and for the thickness of the liner from foam rubber. Next, in accordance with the drawing, a paper pattern is made. But for those who have the skills of sewing and cutting, this is not necessary: you can immediately begin to transfer the sketch to the material. The rim should be a removable fabric cover and a foam rubber liner. "Soft" barrier can be decorated with lace ribbons or ruches. The cover is stitched from two rectangular fabric sheets, laid face to face. If ruffles are provided, a strip of fabric or tape is inserted between the canvases and hand-stitched with stitches. Next, spend on the sewing machine and take out a more unnecessary thread of the mark. Stitching of the fabrics is made from three sides, leaving the fourth for "lightning". When the cover is ready, proceed to manufacture the liner from foam rubber. To do this, a thin marker is drawn on it with a rectangle, reducing the size of the pattern by 1-1.5 cm on each side. With the help of scissors cut out the liner and make a fitting, putting the cover on it. If everything suits, proceed to sewing the lock "lightning". Instead, you can build a fastener with buttons or rivets. If the edge is fastened to the bed with Velcro, these parts are glued or sewed in the right places. But another option is possible for fixing the "soft" barrier: with the help of vyazochek (ribbons). If it is he who chooses, it is recommended to fasten the fabric strips at the stage of the seams of the sheath. If you do not want to make it removable, you can make a beautiful border from a cloth-lined foam with stitching in the form of rhombuses, squares, patterns. When using a thread of contrasting color, the product will look more stylish and elegant.

Tip 2: Why you need protection on a cot

Protection for a crib allows you to makesleeping place kid more comfortable, beautiful and safe. It can be bought or sewed by yourself. The material for manufacturing must be natural, the sides must be regularly washed.

Protection for the crib - the sides of the fabric, whichfastened along its perimeter. They can be bought in a store, ordered online or made independently of woven material and soft filler. Protective fences are produced in different sizes and heights. Their use is advisable for young children under 2 years. There is an opinion that the use of rails can be harmful. The main arguments of the opponents of this accessory are: - dust is collected in the fabric and filler - the fence interferes with fresh air intake - protection prevents the child from watching. Regular washing will not allow dust to accumulate on the surface and inside the rims. For air circulation, the walls of the protection are not a hindrance, since the material can not completely cover the air streams. Protection is issued at different heights, you can choose a model that protects the child and visibility will save.

Purpose of protection

Bortics protect babies during games, recreation andSleep. The walls of the crib are quite stiff and the child can hit them hard during games or overturns. The kid can accidentally hit the head, stick a pen or leg across the bed of the bed. As a result, you can injure the skin, dislocate the limb, or become very frightened. Bortiki protect the sleeping place from drafts. They perform not only practical functions, but they can also decorate a baby crib and entertain a child who will be happy to look at the depicted animals or fairy-tale characters and communicate with them. Children easily fall asleep in the crib with the rims, as their attention is not diverted to extraneous things. Do not let the toys and the pacifier drop out of bed.

The right choice and care

The barrier must be made of naturalMaterials, its installation will take only a few minutes. The product must be periodically washed, which will get rid of the accumulated dust. It is desirable to do this weekly, and when selecting side panels, pay attention to models that can withstand machine washing. Hanging for drying is better to fresh air, usually the time for complete drying is required a little. For a crib it is desirable to choose a barrier of calm pastel tones with pictures. Bright colors excite the effect on the psyche, which prevents you from relaxing and quietly falling asleep. During wakefulness, babies like to look at images or try to reach for it with a pen. The right choice and care for the cushions for the crib allow you to make the baby's sleeping place more comfortable and safe.

Tip 3: The side for the bed from falling - an indispensable device in the house

Borders for the bed, protecting the child from falling, are good help to parents. Therefore, it is necessary to take into account two important points in choosing them - the advantages of the rims and possible disadvantages.

Border for a bed from falling - an irreplaceable adaptation in the house

Advantages of rails

The cushion for a child's bed is intended for,to prevent the fall of the baby, thereby protecting him. Most of the children spin in a dream, and some of them crawl and rise at night in order to then lie down. It is clear that at such times the baby can fall. And the justification for this situation is not even that the child has a large bed, and he is sleeping peacefully. You can not give a guarantee that someday he will not start spinning and falling. It is in this case comes handy side for the bed. It is designed for the child. The bar is placed so that the child can climb into the bed himself, but its middle will be well protected at the same time. The length between the side and the back of the bed is small, the child will not fall. Therefore, even if the baby decides to play actively on the bed during the day, it will not do him harm.

Buying Tips

Buying a baby bed, sellers, perhaps,offer the option along with the rim. In this case, it should be taken into account that in most cases it is not removable and is bolted tightly. Manufacturers can only install this protection on one side, but they can do it all around the perimeter. In this case, the scope of the rims is only one. This can not be said about specimens that are sold separately. The fact is that they can be used outside their home. For example, you can take them on vacation, as well as use in another house, if you have to stay there overnight. In a separate form from the bed, the sides can be sold not only one-sided, which are designed for beds located near the wall. They can be two-sided, that is, when the bed is located in the middle of the room. Such a protective device is made of a metal frame, which is covered with a cloth. This option can be considered reliable, therefore, if parents offer a side made of less durable material, it is better to refuse. Such devices, though cost less, can not really protect the baby. When buying, you also need to ensure that manufacturers use environmentally friendly material. Most often, the rims are made of cushioning soft material, which is why the baby, striking it with a foot or handle, will not experience pain. It is desirable that such a safety barrier is easily lowered, which will ensure direct access to the baby.

Tip 4: Furniture-transformer: a good solution for a small apartment

To a small apartment was comfortable andConvenient for living, do not necessarily give up the necessary interior items. It is necessary only with the mind to approach the selection of the right environment, which can save usable space. This applies to items that can be transformed and folded.

Bed in the closet

Before, space was saved by foldingarmchairs and sofa beds, but they are not always the best solution, since they release the minimum amount of usable space without providing a comfortable and valuable rest. The solution in this case becomes an invisible bed: at night it is spacious and comfortable, and in the morning it disappears in an elegant wardrobe - built-in or stand-alone. The design of the bed is such that you do not even have to cover it and spread it out - you just need to add and unfold the structure in one motion, and the rest will be made with special devices.

Sofa, turning into a bunk bed

For children's rooms an excellent solution will bea sofa that does not turn into a wide double bed, but a two-story sleeper equipped with a staircase integrated into the frame. The staircase is simultaneously a support and a protective barrier for a sleeping place located on top. The upholstery of the sofa can be removed and washed. This sofa is suitable not only for children, but also for a small living room.

Built-in kitchen table

Many Russian cuisines are so small that in themSometimes there is not even room for a table. But even from this situation you can find a way out if you equip the kitchen with a set with a retractable table top. In folded form it is an ordinary box, but it hides a compact countertop, which is enough to pull by the handle. To the tabletop was stable, the manufacturers provide a foot-support, which hides in a special niche. The table is convenient in that it can only be used if necessary.

Living room transformer for living room

What if I like to receive guests, anda full table in the living room can not be delivered because of the small size of the room? You can buy a coffee table with a secret. Its design is such that, if necessary, a table appears in the living room, behind which a large company will be located. Transformer weighs a lot, but the configuration of the design comes from a light touch. And for the convenience of moving around the room, the table is equipped with wheels.

Tip 5: Where to put the bed

You bought a comfortable mattress, made fresh bed linens, ventilated the room for the night, but the dream still does not go? Think about it, maybe it's because your bed is in the wrong place.

First, we'll figure out what mistakes people make most often, choosing the place where they will stand bed. It should not be put down to the door, because in this way the dead are taken out of the house, and this is considered a bad omen. Also do not put bed headboard to the window. In a dream, the person most needs protection. It can provide walls, but not transparent glass. Above bedYou should not hang heavy lamps or chandeliers, as subconsciously they will cause trouble for the sleeper. If you have no other option but to put bed To the door, try to make a barrier: put a screen, hang a decorative curtain, put a few pots with indoor plants. It is important that the partition is higher than bed. The optimal place for putting bed - Diagonally from the door. From there, lying on the bed sees the incoming. If you do not have the opportunity to unfold the furniture, the mirror will help you. Hang it in such a way that, looking at him, the person saw incoming guests. It is not best to install a bed near the wall that borders the toilet. If there is no other option, do not put furniture close to the wall, move it at least half a meter. bedAnd opposite to it there should be no mirrors. Feng Shui claims that in a dream, negative energy and unnecessary information comes from a person. If the mirror is opposite the sleeper, unnecessary emotions will be reflected and come back. Also it is not necessary to store under bedyu things. Leave space free, otherwise the qi energy will not be able to circulate around the room. If you decide to put bed near the window, it is important that it touches the head of the wall. Set bed In the middle of the room so that it does not touch eitherWith one wall, is strictly not recommended. When choosing a place for a bed, do not forget about the geopathic zones. They are best felt by cats. It was from here that the sign went to run the cat into the house and have its sleeping place where the animal curls up. If you do not have cats, and you doubt whether it was successfully put bed, Try to germinate grains of rye or wheat next to your bed. If your fears are justified, and you really are located on the geopathic zone, the shoots just will not rise.

Tip 6: How to find a job at home without the Internet

Domestic work is considered one of the optionswork-in-progress, since it's not everyone who can combine household chores and work duties. But there are several activities that can bring real income to Home, Allowing you to realize your potential.

Instructions

If by profession you are an accountant, then find a well-paid The work not difficult. Many business leaders choose in favor of private, invited or remote accountants who are not in the office on a daily basis. So they are trying to reduce the cost of maintaining the state. Working at home, you can choose the time that is convenient for drawing up reports and visiting tax, financial organizations. Appear in the office you will have several times a month. The presence of a home computer, even without access to the Internet, will make it possible to compile balances and other calculation.

Realization of own creative abilitieswill allow you to earn money - you can knit or sew. Having earned a certain number of clients, you will provide yourself with a stable income. Private enterprises often hire seamstresses who work for Home - you bring materials, sketches, installDeadlines and require the submission of results on their expiration. Knitters will have to spend first on sticking ads, submitting them to newspapers, etc. You can paint furniture, fabrics, cook soap, make beadwork, make decorations from polymer clay, bake cakes, etc.

Take up tutoring. If you have a good command of one of the foreign languages, are strong in mathematics, physics and other subjects, you can deal with children and adults by teaching them these disciplines. Prepare a workplace with good lighting (ideally it should be a separate room), talk with the home, explaining to them that there is no way to disturb you at this time. Advertise, distribute information through acquaintances and enter the required number of students.

Work as a nanny. Private babysitting services are now in high demand. If you have a pedagogical experience, you love children and know how to get along with them, then try your hand at educating. Buy toys, books, equip a child's bed and look for pupils through friends, acquaintances, apply for a job search in the agency for hiring home staff. Immediately stipulate the fact that you will work only in your territory.

Tip 7: How to make a soft pillow head

Soft headboard Make any bed original and more cozy. This way of modifying a familiar thing will allow it to fit into any interior. You can independently choose the shape for the headboard, as well as the color and texture of the upholstery.

You will need

- plywood
- foam rubber
- batting
- a stapler and staples to it
- marker
- upholstery fabric
- batting
- scissors
- electric jigsaw

Instructions

Take measurements with Beds. Transfer them to paper to get a pattern for building a pattern. If you want to headboard Was figured, draw the missing elements to the template. Cut out the pattern. If both sides of the headboard are symmetrical, for the convenience of work you can make a pattern of only one side.

Attach the template to the plywood sheet. Circle it in pencil. Cut out the pattern with electric jigsaw, setting a suitable for the thickness of plywood jigsaw blade.

Mark on the cut out details of the place in whichThere will be buttons. Place a thin drill bit in the drill (between 5/16 and 7/32) and drill holes at the indicated points. To make the holes clean and neat, drill them from two sides.

Spread on a flat surface foam rubber orAnother material that you plan to use for plating. On top of the soft layer, place the pattern from the plywood and circle it with a marker. Cut out the lines with the tailor's scissors.

If it so happened that the piece of foam rubberNot large enough to cover the whole plywood shape, make up the upholstery of individual pieces. To do this, place the template on a table or other support. Place the pieces of the selected soft material on it and, cutting off the corners and excesses from them, form the elements that will close the template together.

Cover the resulting structure with a batting and, bending the edges, secure with a stapler. Batting will connect the plywood and foam rubber with each other as tightly as possible.

Prepare the skin material. Spread it over the batting. Turn the fabric on the plywood in the middle of the bend of the headboard and secure in this place with a stapler. Then proceed to fix the skin, moving from the middle to the edges. Carefully lay the material, forming, where necessary, neat creases, and secure with clamps. To the borders of the head of the head were as attractive as possible, try to cover each new guard with the previous one.

Tighten the buttons with a cloth. Attach them to the headboard. To do this, pass into the prepared holes a needle with a thread, and, stringing a button, fix on the back side of the headboard. Secure the finished product headboard, Hanging it with D-shaped hooks to the wall.

LovesTheTeam.com

All About Everything