LovesTheTeam.com

Instructions

1

Open Adobe Photoshop, and in it itself -necessary file with animation. Click the menu item "File"> "Open" or use the hot keys Ctrl + O. In the next window, select the desired file and click "Open".

2

Open the animation window: Click the menu item "Window"> "Animation". In this window, animation loaded into the program is displayed frame by frame. If you pay attention to the "Layers" window (if it is not available, press F7), you can notice that there are as many layers in it as there are frames in the "Animation" window. Each layer duplicates one frame, but if this layer is deleted, then in the final version of the animation, instead of this frame, there will be an empty space. Therefore, you need to work with the frames in the Animation window.

3

Select unsuitable frames. In this case, just like selecting files in the standard Windows Explorer, you can use the Shift or Ctrl keys. And now delete the frames by clicking on the button "Deletes selected frames" (Deletes selected frames). It is located at the bottom of the animation window and is shown as a garbage bin. Done, the animation is cut off.

4

To correct an oversight, for example, you coulddelete the wrong frames, you can go back and fix it. To go back one step and back, use the hotkeys Ctrl + Z. To go back a few steps, use the History window (Window> Window> History).

5

Now save the result. Click the menu item "File"> "Save for web and devices" or press Alt + Ctrl + Shift + S. In the window that appears, make sure that "Forever" is set in the "Looping Options" setting, and then click on the "Save" button. In the next window, specify the path for the file, too, click "Save".

You will need

• - program 1C.

Instructions

1

Archive a copy of the current databaseenterprise. This is done in case when the program starts to run unstable after it is truncated. Also, for some reason you may need to access old data, so do not forget to make backup copies. The best way is to store them on removable storage.

2

Run the program in exclusive mode ifyou need to check the corresponding menu item. Find the menu item "Service" in the menu of the program, in it you will find the function of convolution of the information base. Further, following the instructions of the menu, perform the necessary operations to reduce it.

3

If the program 1Cworks unstably, download a previously archived copy of your company data and call the programmer. Do not perform database folding without creating a copy yourself, since this can lead to undesirable consequences, it may very well be that you will need a complete reinstallation of the program with the creation of a new information database, which will take much longer than the call of a specialist.

4

Register on special forums forprogrammers 1C in order to receive timely assistance from more experienced users. This also applies when there is no special 1C programmer at the enterprise, and situations when you yourself are a programmer. Since the 1C program is quite complex, one should never forget that it is necessary to replenish knowledge about it from official and alternative sources in a timely manner. Also, study the updates of the program versions more carefully, since this is an important part of working with 1C.

5

If you think that you do not have enough knowledgeto work with the program 1C, pay attention to special training courses for specialists in this field, usually they are held in almost every city.

You will need

• Adobe Illustrator

Instructions

1

Launch Adobe Illustrator and open Picture, which you want to crop. To do this, click the File> Open menu item (or Ctrl + O hotkeys), select the image and click Open.

2

Select the Rectangle Tool (hotkey M). On the toolbar, set the Stroke parameter (line width) to 1, and the color of the rectangle to None. Create a frame with this tool, which, according to your idea, will cut the existing Picture.

3

Open the Layers panel (Window> Layers menu itemor hotkey F7), hold down Ctrl and click the left mouse button on the circle that is to the right of each layer (with the original picture and the rectangle created in the previous step of the instruction). A circle will appear around the circle, which means that the layer is selected.

4

Trim Picture, by calling the Clipping Mask command. There are two ways to do this. First - click the menu item Object> Clipping Mask> Make. Second - press the hot keys Ctrl + 7.

5

In addition, you can use other tools for cropping Picture. Moreover, you can do it moreneatly, and this gives a wide scope for creativity. For example, if you follow the instructions above, but instead use the Type Tool (T hotkey) instead of the Rectangle Tool, instead of just a rectangle, you can create an inscription with a picture fragment instead of a color. The same applies to the Pen Tool (P), Ellipse Tool (L), Paintbrush Tool (B), and so on.

6

To save the result, click the menu item File> Save as (or Ctrl + S hotkeys), select the path for the future file, specify the name and format, and click "Save".

You will need

• - Personal Computer;
• - file dvd;
• - the Nero program installed on the computer;
• - A program that converts video.

Instructions

1

Software Nero significantlymakes life easier for both novice video amateurs and professional editors. The program has many opportunities. In addition to recording information on discs, it allows you to work with music, record video, compress DVD-9 discs to DVD-5 (4.7 GB) format, copy discs, create your own movies and slideshows. One of the useful utilities of the program is trimming video files.

2

To start editing dvd-videos,run Nero. In the window that opens, select the category "Photos and Videos". Then, in this section, go to "Transcode DVD Video". If you bring a mouse to this inscription, you will learn about the capabilities of the program, which is able to convert parts from different sources into the mpeg-4 format. Editing files in this program is done using the Nero Recode Wizard.

3

After selecting the item "Recode DVD-Video"Before you open the Nero Recode window. In the list of tasks on the right, click the "Import Video" button and add the required video file stored on the computer to the project. If you want to crop the video from the disc, then copy it to the hard disk of your PC.

4

After the video appears in the program window,you can start editing it. Go to the "Trimming the film" section, and by moving the slider in each window, specify the start and end point of the movie.

5

When the film is cropped, click the "Next" buttonand go to the next step - saving the file. Select the destination folder, specify a folder for storing temporary files. Then press the "Record" button and wait until the process is complete. You can also save the file to disk. To do this, in the "Receiver" line, specify a removable disk.

6

After saving the already cropped file, you canUse it in mpeg-4 format or convert it to any other video format. To do this, use the converter that you like most. Excellent, for example, the "Factory of Formats" with a clear Russian interface and high productivity of work is suitable for these purposes.

You will need

• - a standard SIM card;
• - scissors;
• - a pencil well sharpened;
• - ruler.

Instructions

1

It goes without saying that there must be a templatemicro sim card, which should be cut standard. The ideal option is to print the template on the printer, but if there is no such option, you just need to remember its dimensions: 12x15 mm.

2

The SIM card needs to be placed upward by the chip, the cut of the corner must be at the top left. To the right of the edge of the map, draw a strip of 1.5 mm wide and carefully cut it with scissors.

3

Next, we'll cut the bottom of the SIM card, weit will be necessary to remove approximately 1 mm. Everything happens in the same sequence: using a pencil and a ruler, a line of the specified width is drawn, then it is cut off.

4

To trim the sim card for iPhone further,ruler should be measured 2 mm from above and draw a line. Before cutting off the top edge, you need to make sure that the width of the newborn card is 12 mm. If all the dimensions match, then you can carefully trim the strip along the top line.

5

It remains to trim the last side to the left. From the edge cut off on the right side, measure 15 mm. The width of the cut strip will be approximately 8 mm. Cutting.

6

At this stage, the SIM card is almost ready,only to cut corners. Three of them are cut only a little, and the fourth cut will look like a rectangular triangle, the 2 sides of which will be equal to 2 mm.

7

A ready cropped card is inserted into the iPhone slot, thus trying on it. If there is a need - it should be cut slightly.

8

If nevertheless after attempt to cut a sim card underIt did not work for iphone, then for sure you made a mistake while cropping, well, or the card turned out to be an old one. In this case, still have to contact the operator, he will replace it with MicroSIM.

9

But there is an easier way to crop a sim cardfor iPhone, using a ready-printed template. All that is needed is to fix the template on the map with a two-sided scotch and cut off all unnecessary on it. In the same way, you can make a nano SIM card from MicroSIM or a standard card.

Instructions

1

Employees of specialized stores claim: if the sheepskin is made of genuine leather, over time (a couple of days), it is smoothed itself. You just need to hang it on your hangers. And yet, not all of us have time to sit and wait for so many. The simplest, of course, is to smooth out Sheepskin coats iron - at very low temperatures and always through nylon. The main thing is not to use steam when ironing. Sometimes nylon is replaced with regular gauze.

2

Another way to smooth out is closely related toyour bathroom. No, it is not necessary to douse the product from the skin. Collect a full bath of very hot water and hang the jacket over the steam that will come out. Carefully ensure that the expensive thing does not fall into the water, otherwise - trouble. This method is suitable for fur coats. Just do not overdo with time - 2 hours over the water, no more.

3

Folk craftsmen invented, perhaps, the easiestmethod. It is only necessary to put a wet cloth in the evening and put it so, for example, until morning. Then wait a bit, when it dries and boldly puts on.

You will need

• Paper napkins, talc, starch, semolina, eraser, brush, water, money

Instructions

1

Since after washing the sheepskin coats heavily andsolidifies, even individual spots on it should not be washed. Instead, a fresh, greasy stain should be soaked with paper napkins (not damp!). Then sprinkle it with talc, starch or semolina. When the powder absorbs contamination, it should be shaken out of the surface of the sheepskin with blows from the inside.

2

To remove protein spots (blood, milk,eggs) and stains of wine, wipe them with a dampened sponge in water. After each movement, flush the sponge under running water. After several repetitions, the stain is partially washed away, finally it is removed in the dry-cleaner.

3

If on the surface of the sheepskin appeared non-greasy dirt, try rubbing them with a white clerical eraser.

4

Dry dirt from the sheepskin coat can be removed with a medium-hard brush. To clean the dry dirt, which is not much "ingrained" in the structure of the material, you can use a vacuum cleaner.

5

In outerwear stores, along with the sheepskin coat, buy special cleaning compounds for her. Such creams and sprays are created taking into account the material and will not damage it.

6

If you can not remove the stain to the end, or you do not want to risk, give the clothes to a dry cleaner.

You will need

• Bucket
• Water
• Powder paint
• A cup
• Two glasses of hot water
• A spoon

Instructions

1

Fill the bucket with hot water to a level of 10 cm from the edge to prepare a solution for painting the sheepskin coat.

2

Mix two glasses of hot water with powder paint in the bowl. Shake the mixture thoroughly with a spoon to make it homogeneous, without lumps and pour it into a bucket of hot water.

3

Wet your Sheepskin coats water. It is better to use directional jets, for example, with the help of a shower head - they allow to wash off dirt and dust.

4

Put a wet and slightly wrung out Sheepskin coats in the bucket. Stir constantly and turn it over. Keep a winter outfit in the paint for about half an hour to make sure that the color is completely absorbed.

5

Rinse freshly dyed Sheepskin coats warm water. Wait until the water becomes clear. And then rinse the product again for 2-3 minutes with ice water.

6

Dry it Sheepskin coats in a well-ventilated room and you can enjoy the new thing!

You will need

• Water, clothing brush, ammonia, glycerin, borax, stationery eraser, vacuum cleaner, crust of white bread

Instructions

1

From dirt and plaque, sheepskin can be cleaned whenaid of soap foam with addition of ammonia. There is another solution that you can use when cleaning your product. For half a liter of water you need 20 grams of glycerin, 20 grams of ammonia and 5 grams of borax. Clean the sheepskin coat with a stiff brush to get rid of stains and plaque.

2

Most small spots can bestationery eraser. Simply rub the dirty surface. Use a vacuum cleaner when cleaning with a soft nozzle to get rid of dust. It is also easy to clean the surface of the sheepskin with a crust of white bread. If the color of your favorite thing is faded, then in a specialized store you can buy a special paint for sheepskin coats.

3

After cleaning, dry the sheepskin coat properly. Do not use electrical appliances when drying. It is best to hang your product on the shoulders and leave it until it dries. This is necessary to prevent the sheepskin from losing its shape.