Tip 1: How to release the mustache

Tip 1: How to release the mustache


Most modern men using shavingRemove all vegetation in the lower part of the face. Nevertheless, some people have a much greater whisker than their absence. If desired, they can grow almost any mature man, but it is important to know how you can make grown mustache the most suitable to face.



How to release the mustache


Instructions


1


Think about whether you will fit a mustache and what kind of shapeit is best to choose. In the selection you can come up with computer programs. Try in Photoshop to impose on your photoraphia different kinds of mustaches, from the most subtle to magnificent. In this case, consider your hair color. So you can approximately imagine how the extra hair on the face will look.


2


Stop shaving the skin over the upper lip. In the early days, such a growing mustache may look untidy, so it is advisable not to assign for this period any official events or photography.


3


When the hair grows a couple of centimeters, you canStart cutting them. Do this based on the selected style. The whiskers can be made straight, as well as with the ends bent up or down. Such a small detail can significantly change the facial expression. It is advisable to trim the mustache on the bottom of the lip so that they do not interfere with your eating. At first, it may not be easy to get used to the drooping mustache, so it's better to start by wearing fairly short hair on the upper lip.


4


If desired, change the appearance of the mustache by shaving a groove in the middle of the lip.


5


Listen to the opinions of others about the changes in your appearance. Your spouse or sister can tell you whether you look from the side the way you want.


6


Properly care for the mustache. They should be washed daily with soap during morning shaving. Most additional care products are not required. Thick mustache should be combed with a special brush. Watch for the neatness of the mustache and after the meal soak them with a napkin, if you are afraid that they have food left on them.


7


If your mustache grows thin and thin,think whether it makes sense to grow them. Perhaps you just do not have enough hair follicles in a particular place. In this case, you will not help the means for hair growth. You should either put up with a rare mustache or shave it altogether.




Tip 2: Showbiz: shaving or not shaving?


Beard - the trend of last year. But does everyone celebrate go in a fashionable way? Still, the beard and mustache strongly change the appearance. What do you think is more appropriate for them?



Show business: shaving or not shaving?


Daniel Craig (47)

Preparing for a role in the Broadway musical "Protracted"rain, "Craig grew a mustache. Colleagues of the actor believe that now Daniel looks like a police officer of the 80's and a porno actor. Comparison, of course, malicious (what else to expect from "well-wishers"), but we can not disagree with the fact that Daniel's mustache does not go. They will forgive him, make him look like a wet cat.

Prince Harry (31)

A thick red beard Harry grew duringexpedition to the South Pole. Under tough conditions, the prince was not up to shaving. But it turned out that the beard was coming from Harry. It gives the young man brutality and special charm.

Garik Kharlamov (34)

It is known that men release a mustache and beard,to give his image of masculinity. Garik Kharlamov should not do this. Clean-shaven, he looks more solid and convincing. But the antennae and sickle-shaped beard make his living and rich facial expressions caricatured. In our opinion, this is too much.

Dima Bilan (34)

Art requires sacrifice. For the sake of Yuri Vasiliev's film "Music on Ice," Bilan had to let go of his beard. We would not be so categorical. Yes, Bilan looks older, but it does not spoil him at all. So we raise your finger up!

Bradley Cooper (40)

If it was not necessary to choose and determine whichWe prefer Cooper's image, then we would vote for both images. Handsome Bradley does not spoil his beard (or rather, unshaven), but we can not say that without vegetation on his face, he looks worse. True they say that beauty can not be spoiled. Well, the finger down indicates a poor quality photo - no more.

Jim Carrey (53)

The actor grew a beard, which was too old. But we do not like Carrie and without a beard. The actor lost weight and looks as if he fell ill.

Danila Kozlovskiy (30)

The beard makes Danila's face more manly. Without it, Kozlovsky is like his mother's son. Apparently, understanding this, the artist prefers a three-day stubble to a clean-shaven face. According to Danila, a slight unshaven gives his image of brutality. But we still put the label "no." She, as in the case of Bradley, characterizes the quality of the photo.




Tip 3: How to choose the shape of a beard


The person who decided to release the beard, stands out forgeneral "bezoboobborodom" background, sometimes in an advantageous way - well-groomed vegetation on the face adds to its carrier of masculinity and mystery. But the untidy bristling of an indefinite form can ruin the image of its owner. How to choose the shape of a beard correctly?



How to choose the shape of a beard


Instructions


1


Rate it Form Your face. The beard can correct some of its unfortunate parts and, on the contrary, emphasize virtues. Too heavy jaw concealed skipper's beard, round face can visually narrow the shape of "trapezium", oval - decorate with an elegant goatee. A large "horseshoe" will fit a long face, and a triangular one will trim a neat semicircular shape.


2


Size and shape Beard Should be correlated with the growth and complexion of a man. To small people of fragile build do not go voluminous Beard-kar, lush mustaches and whiskers - they will make the head disproportionately bulky. Think of figured "goat" beards - they will look quite proportional.


3


Keep in mind the shade of your hair and skin. The darker the hair, the less bulky the beard should be. Holders of black hair and light skin should be especially careful. Choose small little beards without whiskers and crossovers on the neck. Keep your cheeks always carefully shaved. Those who have light hair, you can think of more voluminous forms that cover the lower part of the face.


4


Choosing Form Beard, Consider how you will take care of it. You are ready to refresh the drawing every other day and carefully follow the curved curves on your face? If not, refrain from complex forms - there is nothing worse than randomly growing hairs of different lengths.


5


Acquire all necessary accessories for care. You will need a special clipper, thinning scissors, a razor and special combs or brushes made of natural bristles. It is worth thinking about care products. On sale there are special shampoos and balms for hard hair Beard, Not irritating to the skin.


6


Have you decided to dye your hair? Do not forget about your beard. Sometimes the sharp contrast between the color of the hair on the face and head gives the wearer additional charm. But such an effect is possible only with natural graying - the beard and hair can lose pigment at different speeds. But a brown or reddish beard, combined with a black hair, will look weird.


7


Bear in mind that the beard makes its carrierVisually older. This can be a plus - for example, a well-groomed beard will give solidity to the young teacher. But on too "childish" face excessive vegetation will look inappropriate.




Tip 4: How to make a mustache


Mustaches adorned men at all times, and in differentCultures have been recognized as different forms of mustaches. Today, mustaches are often not only the adornment of men, but also a means of transforming the appearance. Using the correct shape of the mustache, a man can correct the shape of the face and hide the disadvantages of proportions.



How to make a mustache


Instructions


1


Before choosing the shape of the mustache, you need to think carefully about how this form will be combined with the features of the man's face and the shape of his nose, as well as the distances between the nose, mouth and chin.


2


Despite the fact that any haircut mustache requiresstrictly individual approach, there are several common points that are characteristic for all types of persons and all types of whiskers. In particular, the sharp tips of the whiskers are fused with an acute razor, and the excessive splendor is removed by the thinning scissors, with which the lower edge of the mustache is worked.


3


To make the whiskers too long, comb them in the opposite direction - from the edges to the center, and then cut off the excess ends.


4


Often masters use forceps to create a shapeMustache. Use only flat, high quality power tongs with stable heating. Mustache must be prepared for registration and aligned with scissors. Comb the mustache to the left and to the right of the center.


5


Thinking about the shape and look of future whiskers, grabheat the tongs of the not-too-hot temperature of their middle part, pull them away from the skin and shape. Release the processed edge of the mustache and tear the next one. At a time, take a small strand of mustache with tongs. Give the whiskers shape in the direction from the middle to the sides.


6


If the mustache needs to be tucked up, the forceps slightly turn so that the strand of hair is wound upwards in the direction of growth.


7


After finishing the heat treatment, comb the whiskers with a brush and cut off excess hair with scissors.




Tip 5: How to cut a mustache


At all times mustache Served as a permanent adornment for men. For a modern man mustache - this is not just an ornament, but also a means of cardinal transformation of appearance. If you choose the most appropriate shape of the mustache, you can hide the flaws in appearance and correct the shape of the face.



How to cut a mustache


Instructions


1


Choosing the shape of a mustache is always goodThink about how it will look in combination with your facial features, with the distances between the chin, mouth and nose, and also with the shape of the nose. Each haircut mustache from the master requires a strictly individual approach to each man individually. However, there are several general rules that are typical for any type of person and for each version of the mustache. In particular, you need to remember that the sharp tips of the mustache must be milled with an acute razor. If mustache Turned out too lush, then this problem can be eliminated with the help of thinning scissors, which you will need to process the bottom edge of the mustache.


2


If your mustache Have grown strongly and you want to make them shorter, thenFirst comb them. And do it in the opposite direction - from the edges to the center. After that, cut off the excess ends with scissors. Use the tongs to give the whiskers the shape you need. Buy only quality, flat tongs, which have stable heating. Be sure to prepare a mustache for aesthetic design. To do this, align them with scissors. From the center to the right and to the left, comb mustache.


3


After you accurately consider the look and formFuture whiskers, then start grasping their middle part with heated but not too hot tongs. Pull the hairs off the skin to the side and give them the desired shape. Then release the edge of the mustache that you have processed, and tear the new one. Do not take a large strand of mustaches at once. Form your mustache attach to the direction from their center to the sides. If you want a little mustache up, then during the treatment of the mustache, slightly rotate the forceps so that a hair strand is wound upwards in the direction of growth.




Tip 6: How to Cut a Picture in Photoshop


The program Adobe Photoshop enjoys a well-deservedpopular with users working with graphics. Using this program, you can create very complex graphical works. One of the most common operations when working with an image is cutting out an element.



How to cut out a drawing in Photoshop


Instructions


1


Cut a portion of the image into Photoshop There are several ways. If you just need to crop the picture, run the program, open the desired image from the "File" menu item. In the left part of the program window there is a toolbar, select the "Trim" tool on it. Move the cursor to the part of the image where one of the corners of the cropped image will be located and press the left mouse button.


2


While holding the button, move the cursor toThe opposite diagonal angle, the frames will show the contour of the cropped part of the image. Do not be afraid to set inaccurate dimensions, you can correct them by dragging the markers on the corners and sides of the selected area. Then select any tool on the panel. A query will appear with three options: "Crop", "Cancel", "Do not crop". To crop drawing, Select the first. If you want to change the cropping borders, click Cancel. Pressing the third button completely cancels the trimming operation.


3


If necessary, cut a rectangularElement, use the "Rectangular Selection" tool. Select the desired area for it, then copy it: "Edit" - "Copy". Now you can paste the copied element into the same or to another image. For accurate insertion, first select the desired area with the same tool, then click: Edit - Paste.


4


If you want to cut an image fragmentComplex form, you can use several tools. The simplest of them is "Quick selection". For example, you need to select a circular element. Select the tool "Quick Selection", click the mouse at the edge of the circle. Then, without releasing the button, move the cursor to the opposite edge of the selected element. The cursor will be stretched uneven selection area. Release the button. Now you can use the mouse to refine the selected area by dragging the path in the desired directions.


5


The most complex objects are best cut usingtool "Pen". Select this tool, at the top of the window, click the "Paths" tool option. Now, by successive mouse clicks, create a contour of the element to be cut. When the path is closed, right-click on the path and select "Create Selection" on the shortcut menu. Now you can copy the selected item and paste it into another image.


6


The Pen tool has a rich feature, withIt can be used to cut even very complex image elements - for example, a fluffy cat. In this case, the program, following your commands, will automatically refine the edges of the image, highlighting the hair and whiskers of the animal. More details about using the "Pen" are better read in specialized literature.