Tip 1: How to determine the length of the strap
Tip 1: How to determine the length of the strap
Accessories say a lot about a person. It is such things as watches, shoes, strap, are objects of status. Correctly matched, including by length, the belt for trousers can both emphasize the individuality and sense of good taste of its owner, and completely ruin the impression of appearance.
You will need
- - tape measure,
- - Table of sizes of trousers.
Instructions
1
Measure the waist size of the person for whombought a belt, or the length of a belt of trousers / skirts, with which they will wear a belt. Add at least ten centimeters to the resulting figure and choose the necessary length of the belt. In this case, it is better to choose this accessory a little longer than the smaller one, since the long strap can be shortened. To do this, unscrew the screw from the buckle side, cut off the excess part, punch in a new hole and screw the screw into this new hole.
2
Choose the length of the belt according to the size corresponding to the standard sizes of clothes in the event that it is not possible to measure the waist circumference of the future belt owner.
3
Take into account when choosing an accessory such as a beltthe fact that it should be fastened to the middle hole, so the length should be appropriate. After all, with a short belt will have to punch additional holes, which will adversely affect the appearance and strength of the belt, as well as the overall impression of the owner's suit.
4
Take into account the features of the belt, whichare going to buy. So, for example, belts produced in the US do not have a leather loafer (loop), which is usually filled with a tail of the belt. Therefore, the length of this product should be chosen taking into account that the length of this accessory was sufficient to pass the end of the belt into the belt loops of the trouser belt.
5
When buying a belt for jeans it is worth considering thatThe length of the belt should be one or two sizes larger than the size of the worn jeans. So, if jeans trousers of size W36, then the belt should be purchased in length 38 or 40 inches. The distance between the holes is usually one inch (25 mm).
Tip 2: How to choose a belt for trousers
Trouser belt is a very important accessoryany man's wardrobe, so his choice should be taken seriously. There are several simple rules, following which, you will always look stylish and respectable.
Types of belts
In the wardrobe of modern men should beseveral belts - for all occasions. The leather classic belt should be made only of high quality natural material. To the touch to be soft and have rounded lines, thanks to a special gasket. However, it is on the materials for laying that manufacturers often save and insert elastic cardboard instead of genuine leather. This strap, unfortunately, is very short-lived. The belt, made of high-quality leather, does not leave any creases. It is advisable to purchase a belt that will be sewn around the perimeter. The line, of course, should be perfect. The pasted product will sooner or later necessarily break up. Now many well-known brands produce single-layer leather belts that are more practical than double-layered with a gasket. When buying a leather belt, it is good to pull it by the ends. It should not stretch more than 1.5 - 2 cm. If it does not stretch, it will be very uncomfortable and taut in the toe. The classic leather belt has a width of 4 or 5 cm. The buckle is made of a single-color material of good quality , which in the process of wearing does not wear off or tarnish. The strap - casual wear, as a rule, with jeans. It can be made of various materials: fabric, rubber, leather, artificial polymers. The buckle can be any, the most unthinkable, shape and size. Belt width from 2-6 cm This belt can not be worn with a strict business suit. Universal belts are suitable for trousers and jeans. Their width is about 3.5 cm.How to choose the right belt according to color and style
The main rule that must be observed whenchoosing the color of the belt: it should be in harmony with the shoes. Brown shoes and a black belt can not be worn. The classic or universal strap is most suitable for a business suit. The hollow belt will look great with corduroy trousers, however, they are strictly not recommended for wearing with a business suit. The braided belts will look harmonious with the clothes for leisure. However, you should make sure that the rough texture of the belt does not weight the fabric from which the trousers are sewn. The correctly selected belt should be fastened to the third hole. It is inadmissible to pierce additional holes in the finished product. If the belt is too long, then it must be shortened to a normal length. You do not need to do this yourself - the result will not look aesthetically pleasing. In the fastened state, the strap must be threaded through the first loom on the trousers. All accessories on the belt should be made of high quality materials. There must be two belt loops on the belt. One is fixed near the buckle, and the other is at a palm rest from the buckle.Tip 3: How to determine the belt size
There are general criteria by which a body is usually measured. They are called - "the standards of the body." To determine your the size (this applies to trousers, outerwear, and belts), follow one simple rule: measure tightly on the body. There are special tables the sizewhere one or another quantity in centimeters is translated into a certain the size. The same applies to the sizebut belts.
Instructions
1
To get the correct and accurate the size belt, measure the waist / waist circumference over clothing with an ordinary sewing centimeter. The obtained quantity is the size belt or ordered the size. Simple and convenient. But if you did not find a centimeter at hand, then you can quite successfully use old trousers, for example, which you wear and in which you feel comfortable. This is very important - trousers should not press you in the waist and hips, otherwise they will not fit.
2
If you find those trousers in your wardrobe, then boldly get down to business. It's very simple: with the same centimeter measure the belt of "saving" trousers.
3
Remember the value that you got. This is your the size, which you can use and when you select belt. Given that most belts are now universal, that is, you can independently adjust the girth and waist size, your the size has only a conditional value. It will be necessary for you in the event that you choose an exclusive belt that can not be adjusted independently. Or in the case when he is sewn to a suit, trousers or a skirt. Now this is a common trend.
4
There is, of course, still a rather complicated way -computational. Measure your height, weight and volume of shoulders. Based on the available values, according to special standardized tables, which again are freely available on the Internet, compare them with the sizeam.
Tip 4: How to determine the size of a skirt
Even the most elegant outfit will fade if heoverly tightens the silhouette of its owner, or, conversely, hangs on it, like a hanger. Every thing, whether it's a skirt, trousers or a blouse, looks great, if properly chosen size.
You will need
- - tailor meter;
- size table.
Instructions
1
In order to correctly size anyclothes, take a tailor's meter (centimeter tape). A centimeter tape should be new. Removing the measurements using an old, stretched tape can give you a sad surprise.
2
Tightly grasp the meter measured body area(waist and hips). Avoid pulling and sagging, otherwise the result will be inaccurate. Your task is to get exact numbers, not beautiful statistics.
3
Make a measurement when you have one lowerLinen, or light clothing for the figure (for example, pantyhose and tank top). Take measurements on all parameters. The non-standard proportions of the body require special attention when choosing the size of the future outfit.
4
Measure your height. Uncover, approach your back to the surface (the heels are close to the wall without a skirting board) with a measuring scale (rostomere). If there is no growth meter, then ask someone to make a mark at the level of your crown. Take the sartorial meter and calculate the height.
5
Determine the circumference of the waist. Relax, do not pull in the belly. Centimeter tape wrap around the waist around the thinnest part.
6
Measure the girth of the hips. Stand in the position "Standing, feet together." Pull the tape along the most prominent points of the buttocks and thighs. Orient about twenty centimeters below the waist.
7
Determine the chest girth. Breasts are also measured at the most prominent points. Measure the length of the legs. Take a sartorial meter and measure the distance from the inside of the thigh to the beginning of the foot.
8
9
Tip 5: How to choose a belt for jeans
Jeans have long been fashionable. If earlier this garment was a thing solely for work, now jeans won fashion podiums. You rarely meet a man who does not have jeans in his wardrobe. And if they are, then there is also a stylish accessory that complements the image.
Instructions
1
A modern and completely new look of jeans can beto impart by means of a belt. Men's jeans are hard to imagine without this accessory, not to mention women's. It is clear that the belt for the fair sex will be different from the belt of a strong half of humanity appearance.
2
To create a unique style, you need to be able tocorrectly choose the belts themselves and belt buckles. Since today they pay much attention to aesthetics when creating such accessories, then to the issue of their choice should be taken with all responsibility.
3
The first thing to consider when choosingbelt, this is the color scheme. Here you need to take into account a few nuances. Belts similar in color to shoes will look good. You can also combine an accessory with a shirt or shirt. The neutral option is to choose a black or brown belt. However, the dark color is not suitable for light jeans. Business people are picking up the straps to the color of the buckle from the clock.
4
When choosing an accessory, you should pay attention tothe quality of the material from which it is made. Strap in the style of "casual" can be made of rubber, leather or ordinary fabric. It is popular with teenagers. A distinctive feature of such a belt is a large buckle with a logo of famous brands. But do not buy cheap fakes, because it will look childish, without creating a style designed by the designer.
5
Sports belts are more suited to modernteenagers and look great with bright T-shirts and colored sneakers. Classics do not fit jeans, so this type of strap should only be worn on trousers.
6
If the belt is chosen by a man, then it is necessary to drawattention to such parameters as a combination of the style and color of the accessory and jeans. The leather of rough manufacture will be an ideal material for manufacture of belts. Therefore, give preference to this type of tissue. Choose medium-sized belts. Do not use this accessory if it is taken from a trouser suit. He does not fit at all to his trousers. This combination will look ridiculous.
7
A women's belt can be made of fabric,leather, tape, nylon or braid. A simple accessory can be used in that case. If it is hidden under a shirt or T-shirt. The style of the belt should match the style of the jeans. A rough army accessory will fit any jeans, supplemented by boots on a thick sole. To a simple tight-fitting jersey, a heavy-duty belt is suitable.
