LovesTheTeam.com

You will need

• Phone, a piece of dense fabric, a packing film, an adhesive tape, any volumetric capacity.

Instructions

1

The first thing to do if the house happenedthe breakthrough of pipes is to try to block the water. For this purpose, in the bathroom or toilet, where pipes with hot and cold water supply pass, there are valves. This is a riser. You can try to close these valves, twisting them against the flow of water. Any way to reach the basement, where the main riser is located. Usually, the keys to the basement are either at the janitors, or at the manor-house, who is responsible for the entrance. Overlapping the main riser, you can deprive the entire entrance of the water supply. Therefore, you must first try to cut off the water in your apartment.

2

Contact appropriate public utilitiesservices. You can call the dispatch office of the housing office, at the number of which call the masters at home. If this happened on a weekday, the dispatcher must first send a specialist to the apartment where the accident occurred. If a breakthrough occurred at the weekend, you can first call the control office of the housing office. In case there are no on duty masters, they should immediately contact the emergency service and send repairmen to the apartment. Before the arrival the masters will contact the owner of the apartment. The telephone numbers of the emergency control room and emergency services are usually posted on the scoreboard on the first floor in each entrance.

3

If the valves could not be stoppedthe flow of water, while the emergency service is traveling, it is necessary, if possible, to put any capacity under the pipe breakout place so that the water does not flood the room. For this purpose, basins, trimmed five-liter bottles. You can collect water and sex rags, but it will take longer than collecting water with the help of containers.

4

While they reach the scene of the incidentspecialists, tanks or rags are collecting water, you should try to restore the integrity of the pipe. Put a patch on the place of flow. Usually a person who does not have skills in this matter will easily cope with the task. It is necessary to take a dense fabric, tightly wrap the place of percolation. Next, apply as many layers of the packaging film and with several layers of scotch - the flow of water will noticeably decrease. And if the pipe is tightly rewound, then the water may leak completely.

5

There is another way to solve the problem. You can contact the emergency service so that, while the specialist is on the way, the masters suggest what you need to do to reduce leakage from the broken pipe. Luckily, this kind of practice is practiced today.

You will need

• - Identity card (usually Russian passport or passport, for children - birth certificate),
• - printout of the itinerary receipt.

Instructions

1

Before leaving the house, prepare a routereceipt. It is not necessary to take it with you on domestic flights, but it is better to have this paper with you, as it may be necessary for you to enter the airport. On international flights, a printed itinerary receipt is required. When passing the passport control abroad, the return ticket for a return flight can be one of the reasons for giving you an entry stamp (in the absence of a printout, you can refuse entry).

2

It is better to arrive to the airport a little beforehand,especially if you have not previously flown by airplanes or the terminal building is unfamiliar to you. Registration usually begins 3 hours before the departure of the aircraft. Usually it ends in 30 or 40 minutes, but sometimes it is prolonged. If you do not have time to register, then you can try to contact the airline employee to whom you are flying, sometimes it turns out to register after the end of the officially assigned time. In case this can not be done, you need to turn to the counter for late passengers.

3

In the Russian airports at the entrance is alwayschecked by the scanner. You need to put your things on the tape, pull out metal objects and keys from your pockets and go through the scanner yourself. In foreign airports, check-in is not always carried out.

4

After going to the terminal building, look around atsearch for an information board. It will indicate whether registration has already started on your flight, and if so, on which racks it passes. All counters are numbered. If you can not navigate, refer to the information desk, it is indicated by the letter "i" and is always located near the entrance.

5

Go to the check-in counters. Submit an identity document to the employee and print out a route receipt, if necessary. In the case of special requests regarding your place, please report this immediately: you can choose a seat by the window or in the aisle.

6

If you put things in your luggage, put them ontape near the reception. In case the weight exceeds the maximum allowable rate, it will be necessary to pay extra. If everything is in order, your luggage will be marked, and you will be given a tag (usually a sticker), on which you can get your luggage on arrival.

7

You will receive a boarding pass, which means thatregistration passed. Further it will be necessary to pass on additional checks: examination and passport control. An employee at the front desk will tell you where to go next.