Tip 1: How to dial a fax number
Tip 1: How to dial a fax number
Faxes are of different types, the most common of them is the device that works from the telephone socket using the internal modem of the telephone line.
You will need
- - facsimile machine.
Instructions
1
If you are using a regular fax machine, dial number similar to how you do it on a landline phone: enter the country code, area code and number subscriber-recipient. In this case, the data transfer service will be paid at regular rates as a call to the recipient's location, since the modem of such fax use a telephone line directly for data transmission.
2
Note that even if you are sending a message to a subscriber who is with you in the same city, the dialing rules numberbut remain the same - enter the country code, area code and only then number phone (fax).
3
If your machine uses data transmission over the Internet, ask the recipient for its address, which you need to enter when sending fax. It is best in this case to read the instructions before using the machine.
4
If you need to send a fax, but you do notknow the country or city code, use the special tables that are available in every modern telephone directory. Also you can view the data you are interested in on the page at the following address: http://www.btk-online.ru/phcode/, also use the following Internet resources: http://www.habit.ru/31/148.html , http://www.hella.ru/code/codeworld.htm, http://zvonka.net/ and so on, depending on the type of information you are interested in.
5
Introducing number the recipient fax, check the correctness of the input data repeatedly if the information sent is very important. Use the memory of the machine to make numbersubscribers, if such a function is provided by your fax, in the future this will reduce the possibility of making an error when entering.
Tip 2: How to dial a phone number
Usually difficulties with recruiting Rooms Phone does not arise. But in view of the fact that now there are a lot of new technical means, against which the old devices get out of use, you have to spend your precious time on "finding out the relationship" with various devices.
Instructions
1
It is possible that in some houses you can still encounter old devices, where instead of buttons there is a circle, and it needs to be rotated to dial the number Phone. Maybe people living in this house will be indignant and say that such a phone is not antiquity at all. In any case, the principle of working with such PhoneMI is simple: you pick up the phone and start rotating the circle, stopping at the numbers you need. When your finger stops, you just remove it from the hole, and the circle returns to its original position. No buttons to press it is not necessary: as soon as you stop dialing the number, you will be connected to the subscriber.
2
The second method is suitable both for portabletelephone handsets or simply telephone sets equipped with buttons, and for mobile phones. You enter a number (it is displayed on the display) and press a special button, at the signal of which the call starts. In the case of some devices, these buttons are marked in green, in the case of others they are simply located in a special way. About where you need to click, you can find out from the instructions or from the owner of the telephone. Also, the call button usually corresponds to the call button, the standard color for it is red.
3
There is an even more convenient option: phone book. Not in the form of a notebook, of course, but in the form of entries in a mobile phone or in a telephone. The plus of this system is that you do not need to enter a whole bunch of numbers each time and spend your precious time on them. The downside is that you can easily forget the desired number and do not remember it if your cell phone sits down and you want to call someone from someone else's cell phone.
4
Some difficulties may arise even when workingwith telephone booths. Now, of course, very few people use them, because many (if not all) already have mobile phones. But sometimes abroad, for example, it is expensive to call from mobile to mobile, and access to Internet services, through which you can contact the house, is not always available. In this case, it is cheaper and more convenient to call from a telephone set, which are available in some countries. You buy a card, insert it into the device and, picking up the phone, dialing the number Phone. First enter the country code, then the city code and only then directly the subscriber's number. Also features of the set Rooms will be determined by the peculiarities of the apparatus itself.
Tip 3: How to dial an extension
In some organizations there is only one phone number, while an office PBX is connected to the line. To call a certain employee, after answering the autoinformer, you need to dial an additional number, usually in tone mode.
Instructions
1
If you called number office PBX from a cell phone, wait for the invitation of the autoinformer, just type in an additional number. Even if the tone signals, you do notyou will hear, in a line they are transferred all the same will be. If the employee you want to contact is on the phone, you will soon be able to talk to him. If it is not there, do not stay on the line for a long time, because the tariffication of the call starts from the moment when the autoinformer answers it.
2
When you call from a landline phone, it all depends on theWhat kind of PBX are you servicing? If it supports tone dialing, then your home device is likely to have been switched to the appropriate mode for a long time by the appropriate switch, and to dial an additional number you can immediately after the invitation. If not, typing number office PBX in a pulsed mode, wait for the autoinformer to be prompted, then press the star key (it will switch your device to the tone mode), and then an additional number. After you talk and put the phone down, the unit will automatically switch to pulse mode.
3
Telephone sets with disk numberas well as early models of push-buttontone mode can not work. If you often have to call office PBX, and the phone you do not support this mode, buy a special device - a beeper. It consists of a keyboard, an electronic synthesizer of DTMF signals and a speaker, and is powered by batteries. It is enough to bring the beeper's dynamics to the microphone of the handset and dial the corresponding numbers - and the PBX recognizes the additional number.
4
If the telephone does not support tone dialing, but the beepper does not, and if the additional number you do not know the required employee, afterinvitations to the autoinformer do nothing, and in half a minute you will be answered by the secretary of the organization to which you are calling. Tell him the name of the employee with whom you want to talk, and he will switch you to the corresponding additional number manually.
