LovesTheTeam.com

You will need

• - access to the Internet;
• - PSP console;
• - Screwdriver Set.

Instructions

1

Find and download the software on the Internetproviding PSPident v0.4. Be sure to verify the reliability of the source and check the downloaded file for viruses. Only after that, turn on the PSP game console in HEN mode, connect to the computer and copy the unpacked folder with the program to the directory of your device at / PSP / GAME /.

2

Disconnect the PSP console from the computer and go tosection "Game". Open "Memory Stick" and start the downloaded application. You will automatically check your device, after which a window will appear with the number of the mother fees. Do not use this method on the consoles of version 3000, because they are not stitched, and the program simply does not get the information from where.

3

Disassemble your PSP console to determinenumber of the motherboard. In most cases, you just need to turn off the device and remove the battery. Under it will be located a sticker, which will indicate the basic information about the game console. Find the Data Code label and copy the letters and numbers beside it to a separate sheet. They are the encrypted code number of the motherboard.

4

Use the special decryption tablePSP motherboards. Find it easily enough, just type in the search query and go to one of the suggested links. Find the code you overwritten and compare it with the specified data. This way you can determine the number of your motherboard.

5

Open the PSP console if the above methodsDid not help you determine the number of the motherboard. Do not do this if you still have a warranty on the device. Loosen all the bolts carefully and remove the bottom cover. After that, remove the drive and find under it the number of the motherboard. It must be very careful not to damage the device.

You will need

• - Screwdriver.

Instructions

1

If your Play Station Portable is not installedstandard firmware program, try to learn the model of the console software method. To do this, open the link http://depositfiles.com/files/1kw17ia2g or http://turbobit.ws/w8kcwrktvc08.html, in your browser, download the PSPident software file, which will help you to view the information about the hardware configuration of your set-top box.

2

Perform a virus scan and the presencemalicious code for the file you downloaded. Unpack it and copy the entire folder with the program on the map of your X device: / PSP / GAME. Next, run it from the "Game" menu, opening it in the Memory Stick. Of course, you can try to run it on the standard firmware of the device, however, most likely, it will be useless. Before installing the firmware program, find out exactly which one is exactly compatible with your prefix model.

3

Also note that in some Play modelsStation Portable information about the motherboard can be found in various stickers on the back cover next to the battery. However, it can be there in encrypted form.

4

If you do not want to reflash your deviceto install such software and are not yet ready to disassemble it, try using the product comparison table. It is likely that it is your Play Station Portable is included in the model lineup with the same motherboards.

5

Call the Play Station Portable customer support service, ask the experts how you can find out the model of the parent fees, without reflashing it and not disassembling the device.

6

If you have a warranty period for your Play Station Portable, disassemble it by unscrewing all the bolts holding the bottom cover. The model of your maternal fees will be written under the drive.

Instructions

1

Identify the motherboard of the game consolexBox with the rest of the device configuration, for example, the lack of an HDMI connector clearly indicates the presence of the Xenon motherboard in the device, since this is the earliest version of xBox. This motherboard has quite bad user reviews, this is due to the peculiarities of its cooling system. The following parameters are typical for this motherboard: CPU 90 nm and GPU 90 nm.

2

If on the motherboard of your game consoleThere is an additional heatsink for cooling the GPU, pay attention also to the presence of built-in HDMI. Most likely, the device has a motherboard Zephyr. In general, it differs little from the previous model, it is rather simply a modified version of it. The CPU and GPU parameters are the same. Usually, the two above-mentioned xBox game console motherboards are found in very old device models.

3

Pay attention to the power supply of yourprefixes, or rather, the indicators of its power. The value of 175 watts clearly indicates that your prefix uses the Falcon motherboard. It is more reliable than Zephyr and even more so Xenon. Problems with GPU and overheating, typical for the two previous models, are solved.

4

Review the CPU and GPU parameters. Made with a 65nm technology that distinguishes them, Jasper motherboards do not have any problems with overheating. The power supply for this model is 150 watts. Due to this, heat dissipation was noticeably reduced, and, accordingly, this means less prerequisites for breakage of the console. At the moment this is the most reliable model of the motherboard for xBox.

5

Note also that you can meet other modifications of xBox motherboards, they are usually available in the United States.

You will need

• - USB cable;
• - A computer connected to the Internet.

Instructions

1

Find the game on the Internet. To do this, simply type in the line of any search engine the name of the game you want. Download the game archive and unzip it.

2

Connect your device to your personalcomputer using a USB cable and make sure that the connection is not interrupted. Open the explorer folder of the memory card of your set-top box. Locate the folder called ISO. Transfer or copy into it your images downloaded from the Internet games. If the ISO folder is not on the memory card of the console - create it manually, following the usual rules for creating folders.

3

Disconnect the PSP from the computer and restartprefix - otherwise, the menu may partly "sag" and incorrectly display the list of games. Then you can start the downloaded games with the help of PSP: they will be displayed in the menu of the prefix itself under the names that you gave them when downloading from the network.

4

Reinstall the games on the console ifthey are working incorrectly. If the game continues to somehow "buggy", download the image of the game from another source: often "pirate" versions of games are damaged during flooding or jumping of their images to the network.