How to get to the menu service
How to get to the menu service
Service menu The TV is used to configure the basic settings of the device. Depending on the manufacturer, there are various combinations for accessing this menu.
You will need
- - service manual.
Instructions
1
To enter the Panasonic TV service menugo to the 38 channel using the remote control, then simultaneously press the "Program" and Store buttons or the combination of the Store and Sleeptimer buttons, holding them for 4 seconds.
2
go to the service menu of the Daewoo TVgo to channel 91. Set the Sharpness setting to minimum. Then exit the Menu mode, instantly execute the following buttons on the remote: Red, Green, Menu. The display shows Service Mode-service mode.
3
Open the service menu of the TV "Vityaz" athelp of control points on the mono-payment, for this they need to be interrupted. Use the alternative way to go to the service menu, by pressing the M, OK and Mute and On buttons. Also you can use the sequence Display, Menu, Mute, Power / on.
4
If you have Aiwa TV, usehidden buttons to enter the service menu. They are located between the System buttons and 8 on the remote control. This action may depend on the model of the TV remote.
5
If you have a Shivaki TV, use the Install button and press 4, 7, 2 and 5 consecutively. In the Adjust position, find the TV's control panel.
6
In order to find the right one for yourTV combination for accessing the service menu, download the repair manual for the TVs of the respective manufacturer. You can find a guide on the Internet, do not confuse it with the user's manual. Please note that opening the service menu of the TV and changing its parameters may result in loss of warranty obligations of the seller and the manufacturer, depending on the conditions prescribed in the coupon.