Tip 1: How to configure the server on your phone
Tip 1: How to configure the server on your phone
If you need to occasionally connect toInternet outside of your own apartment or office, it’s extremely unwise to purchase a 3G modem. It is much easier to use a regular mobile phone as a modem to access the Internet.
You will need
- - PC Suite;
- cable.
Instructions
1
Now it’s hard to find a mobile phoneconnectable to a computer with a cable that does not support modem functions. But it is still better to first make sure that there is such an opportunity. Connect the USB port of a laptop or desktop computer with a mobile phone.
2
Download and install a program that allowsconfigure your phone to synchronize with your computer. This can be any utility you like, but manufacturers recommend using their program for this purpose. They are usually posted in free access on the official websites of these companies.
3
The example will be considered as an example.connect to the Internet using the Nokia PC Suit utility. This production of the Nokia company allows to make a huge number of manipulations with phone. Run this program.
4
Open the "Connect to the Internet" menu.Please note that access to the world wide web at the phone itself must be configured. Specify the login and password that your operator recommends using to connect to the Internet. Usually they take the same values as when setting up the phone itself.
5
Now click the "Parameter Settings" button.Enter more detailed internet connection settings. Specify the access point to make the connection and the type of data transfer. If you have chosen a 3G data channel, first make sure that your mobile phone supports work with this network.
6
Now click "Finish" to saveparameters. In the "Connect to the Internet" menu, click the "Connect" button. Wait for the program to perform the required operations to make the connection. Now minimize the window, but do not close it. Remember that by closing the program window, you disconnect the computer from the Internet.
Tip 2: How to set up synchronization
If you by the nature of their activities havework on multiple computers, then constantly editing the settings of certain programs can take a significant part of your time. To facilitate the transfer of program settings, there is such a thing as synchronization. Today, synchronization connects to most popular programs. The purpose of synchronization is to quickly save and load settings. Perhaps the most famous complex with the synchronization system is Google.
You will need
- Account on Google, Google Chrome software.
Instructions
1
Signing up with Google gives you access tomany applications. This is not only mail, but also a calendar, bookmarks, answers to questions, a search engine, a webmaster panel, etc. If you use Google Chrome browser, transfer settings from one computer to another, i.e. synchronizationcan be done in a few steps. System administrators use synchronizationto ensure the same settings for the browser.
2
Open the Google Chrome browser. Click the wrench icon in the upper right corner of the browser. In the context menu that opens, select "Options".
3
In the window that opens, select the "Personal materials" tab. The first item in this window will be the "Synchronization" section. To set up synchronization, click the button of the same name.
4
In the new dialog box, log into your accountGoogle. In the window that opens, select the items of synchronization. The best choice is to click the button "Sync all". This parameter includes: - extensions (add-ons) of the Google Chrome browser; - automatic data filling; - bookmarks to the pages of websites; - logins and passwords; - all settings and themes.
5
After clicking on the "OK" button, you must specify a passphrase that will always be used during the next synchronization. In the same window, you can delete synchronizationif it is no longer in use or multiple users will use the browser.
6
When installing Google Chrome, you need to go to the sync window, click the sync button, enter a passphrase, and use the configured browser.
Tip 3: How to set up your phone as a modem
Although today the Internet is more accessible than ever, in some areas there is no wired Internet, so you have to use the worldwide network through phone. To do this, you need to configure the functions Modem
You will need
- Phone, USB cable or Bluetooth on the computer (provided that it is on the phone), modem driver for your phone model (goes to the disk to the phone, you can also download from the Internet).
Instructions
1
Connect phone with computer using cable. Go to the computer in the "Control Panel", find "Phones and modems" and select "Modems". Click "Add".
2
In the window that appears, select "Do not determine the type of modem (select from the list)" and click "Next."
3
Click the "Install from Disk" button and select from which disk or folder the system should install the driver. Click "Next", select your model from the list. phoneand again "Next."
4
Now specify which port to installdriver (if you don’t know what it is, don’t change anything), click Next again. If the program "throws out" an incompatibility window with your operating system, click the "Continue Anyway" button and wait while the driver is running. Click Finish.
5
Now we set up the connection. Check if it is connected phone to the computer. Go to the computer in the "Control Panel", find "Phones and modems" and select "Modems".
6
Select the modem you have installed and clickbutton "Properties". Next, go to the tab “Additional communication parameters” and in the field “additional initialization commands” copy this line: AT + CGDCONT = 1, "IP", "internet.beeline.ru" (internet.beeline.ru - changes depending on your mobile operator. What to indicate to you, find out by calling the operator). All characters in the string must be without spaces!
7
Now in the "Control Panel" click the tab"Network Connections", "Creating a New Connection" and now "Next." Choose: “Connect to the Internet” -> “Establish a manual connection” -> “Via a regular modem”.
8
Now you need to select the modem that you have installed and enter (depends on the mobile operator): connection name: BeelineEDGE number phonea: * 99 *** 1 # username: beeline password: beeline password confirmation: beeline
9
Try to go online: Start -> Control Panel -> Network Connections -> BeelineEDGE
Tip 4: How to set up the Internet on a Nokia mobile phone
Nokia mobile phones in most caseshave a lot of opportunities for an exciting leisure time. You can watch movies, listen to music and radio, as well as play games and surf the web. In order to enjoy all the features, you need to configure the Internet.
Instructions
1
To set up your phone for full use the InternetYou can use the settings that areon the official website of the operator. You can find the address of this site on the package from the SIM card. Or just call customer support and ask for settings. You can also request an SMS message with the settings, by activating which, you will automatically configure your phone. Read the tariffs for network access, as well as the trip threshold the Interneta. Keep in mind that your account must have enough money to go online.
2
Configure the browser that is installed in your phone default. The best option is to disable the loading of pictures, as well as elements of flash - so you will greatly facilitate the traffic, reducing the cost of it.
3
Install the Opera mini browser. The most convenient option would be to download the browser to the computer and further copy the file either through a data cable or through a card reader. Also, you can enter a link to the file in the address bar of the browser located on the phone, and download the file. After installing the browser, disable the download of images, as well as applications. The specificity of this application is that with its help you can not only view wap pages, but also any others. This is achieved by the fact that the page you are requesting is first sent to the server opera.com, where it is processed, compressed and adapted for your phone, and only then sent.
4
Also, you can use the popularmessengers - icq, mail.agent, jimm and others. Download them to your phone in any of the ways described in the third step. They do not consume a lot of traffic, while using them, you can always stay in touch with your friends.
Tip 5: How to configure the server
Server acts as a link in localnetwork, through which the Internet is distributed and is the management of jobs. It can also be used to store information and create backup copies of systems. To set up a server computer, you need to be well-versed in networking technologies.
Instructions
1
Assemble or select the computer youwant to set up as a server. Its technical and system specifications must meet the requirements. The main thing is that it should be powerful enough to handle large streams of information transmitted between local and global networks without problems and brakes. If you also plan to use the server to store information or backup copies of systems, then it should be equipped with sufficient memory.
2
Equip the server computer with a network adapterwith two connectors. The first will be used to connect to the Internet, and the second - to connect to the network hub of the local network. You will also need a network cable, which consists of four unshielded twisted-pair cables, connectors for connecting and crimping device. Make sure that you have all the necessary details for creating a local network and setting up a server.
3
Start the server computer.Go to the "Network and Sharing Center" and open the "Change adapter settings" window. Right-click on the internet connection and select "Properties". Go to the Access tab and activate the permission for other network users to use the Internet connection of this computer. Close the window and open the settings of the adapter connected to the local network.
4
Highlight the "Internet Protocol TCP / IPv4" andclick on the "Properties" button. Check the box “Use the following IP address” and assign a network address and a subnet mask to your server. For example, you can set the IP address 192.168.0.1 and the subnet mask to 255.255.255.0. Save the settings and close the window.
5
Turn on the computers of the local network and openconnection properties. Go to the Internet Protocol settings. Assign each computer its own IP-address, it is most convenient to number them in order, starting with two. For example, the first computer on the network will have an IP address of 191.168.01.2. After that, specify the subnet mask, which should match the server settings, and fill in the server details. Save the settings.
Tip 6: How to set up GPRS-Internet in your Nokia phone
Use of mobile the Internet with or without the wrong settingsgenerally threatens to increase the cost of one megabyte by about a hundred times. In the phones of most manufacturers, incl. Nokia, provides a flexible configuration system that allows you to adapt the device to the settings of any operator.
Instructions
1
Launch the phone's SIM menu.Depending on its model, it may be located in the folder “My Applications.”, “Applications” - “Installed” or in another. Find an item in it that is designed to automatically receive mobile Internet settings (not WAP!) For Nokia devices. Wait for the configuration message to arrive. Be sure to check that the name of the access point (APN) in them begins with internet, not wap, and then activate them. If you need a password, enter "1234", and in case it does not fit - "12345".
2
If this method can only getWAP settings, call operator support and ask for the correct settings. Explain to the consultant that you want to use the mobile Internet, and not WAP. Name not only the manufacturer of the device (Nokia), but also its model. When the configuration message arrives, check it before anytime just in case.
3
In case the operator refuses to provideyou have settings specifically for the Internet, go to the following site: http: //mobile.yandex.ru/tune/. Enter your phone number, select the operator and model of the device. Then activate the incoming message with the settings as described above.
4
If necessary, configure your phone manually.To do this, select the menu item “Settings” - “Configuration” - “Personal configuration settings” (in different models the location of this item may differ). In the additional menu, called by the left screen button, select “Add new” - “Access point”. Name the point think of any. Enable packet data mode. Fill in the following fields: APN - internet.mts.ru (for MTS), internet.beeline.ru (for Beeline), internet (for MegaFon). Fill in the fields for username and password in the same way: mts (for MTS), beeline (for Beeline), gdata (for MegaFon). Set the point you created as the default for both the embedded browser and applications. Go to the Internet from the built-in browser and from any application, then call the support service and ask which APN was used for access. If they say that in both cases the APN was used for the Internet, the setup can be considered successful.
5
If a service is available in your areaunlimited internet access at a price that suits you, connect it. Note that in roaming the cost of one megabyte is very high, and unlimited access is not valid.
Tip 7: How to set up GPS on your Nokia phone
On Nokia smartphones for GPS functionalityOvi Maps application is used. This program is completely free and allows you to determine the location, plan routes and find various businesses and locations directly from your mobile device. A voice navigation and guide feature is also available.
You will need
- - Internet configured on your Nokia phone.
Instructions
1
Make sure your internet is properly configured. To do this, launch a browser or any application using packet data transmission, check its operation.
2
Go to “Settings” - “Phone” - “Application Settings” - “Location”, select the settings of your operator.
3
If Ovi is not installed on your smartphoneMaps, go to the official Nokia website to download it. You can do this with a computer. After downloading the application, connect the phone using a cable in Ovi Suite mode and make the installation by double-clicking on the downloaded .sis (.sisx) file.
4
Launch Ovi Maps using the eponymous shortcut in the phone menu.
5
Wait until all the data and maps have been downloaded, and then select the My Location menu. If everything works correctly, then after a while the map with your current location will be shown on the screen.
6
There are many other third-partyapplications-navigators that use the built-in phone GPS-module. Among the free programs worth noting the mobile version of the famous utility 2GIS. It has a similar to the computer version of the functionality, is able to display a list of companies and routes of public transport. There is also a program Garmin Mobile XT, which has similar functions, but has a higher speed when compared with Ovi Maps.
Tip 8: How to set up mobile Internet on your Nokia phone
Mobile the Internet is very popular among residentsRussia and not only. Access is via the radio interface of the cellular communication system. Before you start using the global network, you must connect and configure your phone.
Instructions
1
Not all Nokia mobile phonessupport such an option as wap or gprs. Therefore, if you purchase a connected device, ask the consultant about the features and built-in options of the phone.
2
Internet services are provided to you by the operator whose subscriber you are. That's why you should clarify settings settings in the cellular company.
3
When you activate the SIM card, your mobilecome settings in the form of a service message. It will be enough to save them and make them standard by default. To do this, go to the phone menu. Before you, you will see several tabs, each of which has its own options and its purpose.
4
To configure the Internet, select the"Options". Opening it, you will see a small list of various functions. Click on the "Phone" option, and then on "Configuration" - "Personal configuration".
5
After that, create an access point. Enter its name - it depends on the cellular operator. For example, if you are a subscriber of OJSC Megafon, specify the name of the point - internet.
6
Enter the name of the setting; it must coincide withcompany name. For example, subscribers of OJSC "Megafon" should establish the name Megafon Internet. Specify the address of the home page, for example, http://www.megafonpro.ru.
7
In addition to these settings, you must activateservice "Mobile Internet", for which contact your operator or use the self-service system, which you can find on the official website of your mobile operator.
8
Some Nokia models do not have the option"Configuration", but there is a so-called parameter WLAN. To configure it, go to the phone menu, select Options - Communication - Settings - Destinations. Before you open a list of Internet settings. Add a new point by selecting the Access Point option. The next item is the Internet "- it contains all possible connections. Also you can set up wap by selecting the third item from the top.
Tip 9: How to set up a computer as a server
To make from your home computerserver, you need to install and configure specialized software. For better performance, it is advisable to install a special operating system and adjust the corresponding parameters.
Instructions
1
Best suited for server operationUnix family of operating systems. They are considered the most secure and can be installed without the use of a graphical shell, which will minimize the expenditure of computer resources and give more on server operation and data processing.
2
Write down the Linux operating system image andinstall it. You can choose almost any distribution of this OS. Debian is best for a web server, but for beginners it will be easier to work with Ubuntu. The boot image can be recorded using the UltraISO program. You can download the desired disk image from the official website of the selected distribution.
3
Boot from the disk and install the recordedsystem to computer To do this, go to the BIOS and select the name of your drive in the First Boot Device section. Insert the disc into the drive and start the computer. Most modern distributions are supplied with a graphical installer, which facilitates the installation procedure. Follow the onscreen instructions.
4
After installing the system, you will see the console, throughwhich will be managed by the server. If you installed Linux with a graphical interface, use the Terminal program in the application menu to launch the command line.
5
To start the server, you need to install the Apache, PHP and MySQL software package. To do this, type the command sudo apt-get install tasksel.
6
After the package installation procedure will becomplete, enter the sudo tasksel install lamp-server request. With it, you install the Apache web server in conjunction with PHP and MySQL to launch the desired site. During the installation process, the program may ask you to set a password for access to the database server. Enter the requested password and click Ok.
7
Start the installed server using the sudo /etc/init.d/apache2 start command. The server can be considered installed.
