LovesTheTeam.com

Instructions

1

Before starting work, disconnect all devices: the TV and both players.

2

Inspect both the rear wall and the frontthe TV panel. If he has two video inputs, connect one player to the first one, and the other to the second one. If necessary, use RCA-SCART or SCART-RCA adapters (ready-made or self-made). The RCA plugs and sockets are color coded: yellow - video signal, white - audio signal. If the signal source and the TV are stereo, the white connectors are used to feed the left channel sound, and the red ones, which are not present on the monophonic units at all - are right-handed.

3

If the TV has only one video input, neitherDo not switch cables every time you need to turn off one player and connect another one. This will cause a rapid wear of the connectors, and if you simultaneously touch the contacts of the connectors that are not currently connected to each other, you can get a noticeable electric shock.

4

In the event that one of the players is a writer andHas a modulator, connect it at a high frequency. To do this, disconnect the antenna from the TV, connect it to the antenna input of the player, and connect the antenna output of the supplied high-frequency cable to the antenna input of the TV. Then it will have to be tuned to the same channel as the modulator. Connect the second player as usual to the video input.

5

If the TV has only one video inputand the lack of modulators for both players, use the switch signal. It has two groups of inputs for sound and image signals and one group of outputs of such signals. Connect the players to the inputs of the switch, and the TV - to its outputs. To select the player that transmits the signal to the TV, move the switch on the switch to the appropriate position. Remote switches do not have such switches.

Tip 2: How to connect two TVs to one cable

To connect multiple TVs to the same cable, you can use different methods. The connection variant depends only on the ultimate goal of this connection.

You will need

• - A splitter.

Instructions

1

If you need to connect your TVs toone cable cable, then use a special splitter. This device is a kind of tee, branched coaxial cable. Connect one end of the splitter to the desired cable, and connect the remaining free slots to the TVs using the appropriate wires.

2

If you use the receiver to gain accessto satellite television, then get an additional splitter. Much depends on which channel you have chosen to connect the receiver to the TV. Currently, the VGA and DVI port splitters can be easily accessed. Connect this accessory to the cable from the receiver. Connect your TVs to it.

3

Remember that you can useadditional adapters, allowing you to connect the ports VGA, DVI and HDMI among themselves. Get the right set of adapters. Please note that using these accessories significantly reduces the quality of the transmitted signal. Remember that with this option of connecting TVs to a single cable, both devices will show a single channel.

4

Use a VGA or DVI port splitter to connect the TVs to one of the computer's video card slots. In this case, an identical signal will be transmitted to both devices, which is not always convenient.

5

The optimal solution is to use two typesconnection. Connect the coaxial cable of a conventional antenna to both TVs using the above method. Connect both devices to the receiver. This method will allow you to switch the operating mode of the TV (receiver / antenna) at the right time, thereby providing you with the ability to select the desired channel. If you want to connect both TVs to satellite TV, then choose the company that installs its own single receiver, servicing the house or the porch.