LovesTheTeam.com

You will need

• - Phoenix;
• - USB cable.

Instructions

1

To flash Nokia mobile phonesuse the Phoenix program. It allows you to work with Dead Mode, which is necessary to update the firmware of the phone without turning on the device.

2

Install the specified application. Remove the sim card from your mobile phone. Remove additional drives if they are used in the machine. On your computer, open Device Manager.

3

Connect the mobile phone to theUsing a suitable USB cable. Press and hold the power button for 2 seconds. Repeat this procedure 3-4 times with an interval of 15 seconds.

4

Wait until the drivers are installed automatically. Connect the charger to the mobile phone and wait for the battery to reach 50% (can be more).

5

Prepare a firmware for your mobile phone. First, use the version that was used in the device at the time of purchase.

6

Run the Phoenix program. In the first term, specify the mode No Connection. Go to the File menu and click the Open Product button. In the list offered by the application, find and select the model of your mobile device. Click the Ok button.

7

Click the Flashing tab and select the optionFirmware Update. Click the Browse button located in the Product Code column. Select the product code that contains the Cyrillic or RU segments in the name. This is necessary to install the Russian-language firmware.

8

Click the Ok button. Activate the option Dead phone USB flashing by checking the box opposite the item of the same name. Now click the Refurbish button.

9

Wait until the first stage of installation is completedFirmware. After the message appears with the phrase Press the phone's power button, press the power button and hold it for 2-3 seconds. If you did everything right, after a while the firmware update will be completed, and the phone will automatically turn on.