How to set up the Internet on the MTS network in Belarus
How to set up the Internet on the MTS network in Belarus
Mobile operator «MTS Belarus» supportsdata transfer via 3G, EDGE and GPRS. To access the Internet, you will need to make certain settings of the device and enter the corresponding data in the access point option through which the Internet connection is made.
Instructions
1
Go to the appropriate menu item forInternet settings on your device. So, for mobile devices based on Android, go to the "Settings" using the appropriate shortcut on the desktop or through the main menu. In the menu that appears, select "Wireless networks" - "Mobile network" - "Access point" or APN.
2
For phones running iOS 6,This menu item is located in the "Settings" section, the shortcut of which is available on the main screen. Select the "Basic" option - "Network" - "Cellular data network". For devices based on iOS 7 use the item "Settings" - "Cellular communication".
3
After opening the device menu, enter the requiredmaking Internet access data. Create a new access point and enter any name for it. In the APN line, specify mts. In the "Name" and "Password" sections, also specify mts. Fields "Proxy" and "Port" do not need to be filled. "Authentication type", select PAP, and for "APN" type, select "Internet", then click "Save" and leave the access point creation menu.
4
For the changes to take effect, rebootapparatus. After making the settings, go to the "Browser" section, using the appropriate shortcut in the system. For the iPhone, this option is represented by Safari. Enter any arbitrary address in the upper address bar and press Enter to go. If all the settings were made correctly, you will see the necessary site on the screen.
5
If the connection fails,that you have not connected the data service. To do this, enter * 111 * 401 # in the phone number dialing mode and press the send call button. If after performing the above actions, you can not access the network, call the operator's support service at 0890.
