How to paste a protective film on the touch screen
How to paste a protective film on the touch screen
Everyone who has a touch phone ortablet, agrees that without a protective film, these devices can not do. Without it, the screen immediately gets dirty, and scratches to put labor is not. Therefore, each owner of devices with a touch screen should be able to stick a protective film. And now I'll tell you how it's done.
You will need
- - scraper;
- - microfiber or lint-free cloth.
Instructions
1
Well, first we need to prepare for thispainstaking work. To do this, you need to find the most dusty place in the house. Many of this procedure is done in the bathroom. Before gluing, you should also wash your hands properly so that the film does not get stained.
2
Now take our film and carefully wipe itmicrofiber, which comes with it in the kit. If you suddenly did not have it, do not be discouraged. You can do this with a napkin. Wipe is not messy movements back and forth, and one movement from the bottom to the top of the film. With the help of bright light, we check its purity. If it stains and villi, then rub it until it becomes perfectly clean.
3
Next, carefully peel the bottomprotective film layer. We apply it to the screen in such a way that it coincides with it vertically and horizontally. As the film is pasted, release the rest of the adhesive side and simultaneously smooth it with your fingers.
4
If, nevertheless, during the pasting of the film you havebubbles are formed, we get rid of them with the help of a scraper. Instead, you can also use a card or credit card. It only remains to wipe the screen with a napkin. Do not get upset if you failed to paste the film the first time. Remember that it can be peeled, rinsed, dried and glued again.
