LovesTheTeam.com

You will need

• Elementary skills of working with the operating system, if necessary, with the use of benefits for work in this system.

Instructions

1

First of all, see the IP address of your router in the data sheet attached to the device. There it should be registered directly on the first page.

2

In case of loss of the technical passport, the IP address can be found in the "Installation Guide" router, which is usually available on a CD-ROM that sellscomplete with the device. In this guide you will find the IP address on one of the first pages. However, if the installation guide (which is often even with goods sold in Russia!) You have only in English or another foreign language that you do not own, then you can "calculate" it like this.

3

Slowly look through the guide and try to find such a kind of "formula" -http: //xxx.xxx.x.x, where x is the number and the digits or numbers of the IP address of your router (for example, sometimes in routerx is the IP address 192.168.0.1). However, here it is necessary to remember that the last digit or number, designated as x, in the IP-address can be unambiguous, and two-digit, and three-digit. All other numbers or numbers separated by dots are exactly what they are designated in the "formula".

4

If it turned out that you have lost the instruction andan installation CD-ROM (or they were not at hand), there is another way to find out the IP address yourself. It consists in the following. Go to the "Settings" section of the "Start" panel. Then click on the "Network Connections" icon. In the open window, select the "Local Area Connection" icon.

5

Sign in by clicking on the highlighted icon"Local Area Connection" with the right mouse button, in the "Properties" section. Highlight the "Internet Protocol TCP / IP" with the cursor. Click on the "Properties" command button, which is located at the bottom of the window: in the field called "Default gateway" you will just have an IP address router (although it will be registered only if the computer is connected to the device).

6

If you can not find the IP address, as recommended in the first five steps, then contact the support of the manufacturer or distributor of your company. router. Their phones and addresses can be found on branded sites.

You will need

• - network cable;
• - computer or laptop.

Instructions

1

To configure the router, you must take into accountrequirements of your provider. I want to immediately note that not all routers can be successfully configured to work with any provider. Obtain suitable equipment. Pay attention to the internet connection connector (DSL or WAN).

2

Connect the purchased router to the networkalternating current. If your device supports work with wireless networks, then check the availability of a Wi-Fi hotspot. Sometimes these routers can be configured without connecting to them through the cable. Otherwise, connect the computer or laptop with the LAN connector of the router.

3

Connect the cable to the DSL or WAN connectorprovider. Start the web browser on the equipment connected to the router. Read the instruction manual of the device and find its IP address in it. Enter its value in the url-line of the browser. Press the Enter key.

4

Open the WAN menu. Based on the recommendations of your provider's specialists, configure the connection to the Internet of this router. Be sure to save the settings.

5

If you need to create a Wi-Fi hotspot,then open the Wireless Settings menu. Set the parameters of your wireless access point. Be sure to set a fairly complex password to prevent hacking your network.

6

In rare cases, more detail is requiredconfigure the settings of the router. For example, if your ISP requires a static IP address for this device, then specify it. This can be done in the WAN menu. Select the Static IP option from the existing options. In the next line, set the static IP address.

7

Note that after changing the IP address of your routeryou may need to drive the value of the new IP to access the hardware settings. Sometimes it may be necessary to configure the local network on computers.

You will need

• - application to the tax inspection;
• - payment for the service;
• - a computer.

Instructions

1

When registering an individual as aindividual entrepreneur all information is entered into a single state register. Contact the tax inspector at the place of residence of the entrepreneur or any other regional inspection.

2

Write an application, pay a state fee for issuing information from a single state register. In addition to this information, you can obtain information about the entrepreneur from the TIN or OGRN.

3

OGRNP is an official document confirmingregistration of an individual as an individual entrepreneur. The document contains 12 figures: the first four are the number of tax authorities that registered; The following six are the main code that confirms the registration of the entrepreneur; the last two digits are the control numbers, written down by the registration number.

4

After 5 working days you will receive an extract from the single registry confirming the individual entrepreneurship of the person you are interested in.

5

If you do not want to contact theinspection, go to the site of the Federal Tax Inspectorate, fill in the name, passport data of the person you are interested in. You will be taken to the personal account of the taxpayer, where it is indicated whether he is a physical, legal person or an individual entrepreneur.

6

For example, if you are planning to contract withentrepreneur and want to make sure that your partner is who he claims to be, then you can easily get passport data and be able to verify the reliability of information in the online system without leaving the office.

7

Also in the personal account of the taxpayer youyou will be able to find out information about the amount of debts for all due tax payments, the amount of the accrued interest, which gives an indirect indication of the responsibility and integrity of the business partner.

Instructions

1

As a rule, to restore lostthe password from Wi-Fi only needs one connected computer to this network, in the lower right corner of which you should find the connection icon and click on it. Next, select "Network and Sharing Center" and the window will open, in which on the right, it is advisable to select "Wireless Network Management". After completing the described combinations, another window will appear, where you right-click on the existing connection, and then select "Properties".

2

Then, going to the "Security" tab,it is advisable to enter the "Network Security Key", where hidden characters will be displayed, meaning a forgotten password. In order to learn it you just need to check the box "Show hidden icons". It is worth noting that the recovered password for reliability should be written on a piece of paper and put it in a certain place.

3

In the event that the computer in the panelthere is no "Wireless Network Management" item, you need to click on the special connection icon in the notification functions, after which the list of networks will open. After that, you must right-click on the same network to which the laptop or tablet is connected, and then select "Properties." Further it is advisable to tick off the item "Display input characters", after which the desired password from Wi-fi will be displayed.

4

It is also possible to find the lostpassword from Wi-Fi in the settings of the router. To do this, simply connect the router to the computer using the supplied network cable. After that, you need to connect this wireless device and enter the following address in the address line of the browser: 192.168.1.1, then type the login and password in order to access the settings. Next, go to the "Wireless Mode" tab - "Wireless Security". In parallel to the "PSK Password" line, the access code for the Wi-Fi network will be displayed. It should be noted that on Asus routers the password can be registered directly on the main page.