Why the computer does not see the navigator

Why the computer does not see the navigator

Navigator is a device that receives signalssatellite and is able to determine your current location. Also, navigators can determine the route, but with appropriate updated electronic terrain maps.

Connect the navigator to the computer without problems

You will need

  • - PC;
  • - navigator;
  • - USB cable;
  • - software;
  • - service center.

Instructions

1

In shops, navigators are sold as fromPre-installed electronic cards, and without electronic software. If the navigator does not have preinstalled cards, the device must be connected to the home PC and downloaded the required licensed software on its own. The new navigator may not be determined by the computer system due to several reasons.

2

Check if the device is connected to the devicecable. Its inconsistency can also be the cause of conflict. Use another suitable cable. Remember, the set of connectors on the navigator depends on the features of a specific model, but usually GPS devices are equipped with standard USB inputs. A defective USB connector is also one of the causes of the conflict between the PC and the GPS device. Take your navigator to the service center. Experts will establish the exact cause.

3

If you connect the device to the computer,The information "USB device is not recognized", try to check the USB parameters in the navigator itself. Some devices may not be recognized via the USB port due to a mismatch between the connectors. USB - universal data transfer interface. It differs from current and data transmission speed. For example, there are USB 1.0, 2.0, 3.0 connectors. The connector of the navigator must match the parameters of the USB interface on the PC. If you connect an unsuitable external device, a conflict may occur due to a USB mismatch.

4

To correctly recognize the navigator, you canYou will need to install additional programs on your PC. For example, ActiveSync is a program for synchronizing various mobile devices with a computer. Total Commander or other suitable file manager. This program will help you get information about the system, see invisible devices and system files.

5

If the GPS device is equipped with a removable cardmemory, it may not be detected due to a malfunction of the media. Try to replace the storage medium. The PC will not detect the navigator if the corresponding software is not installed in the system - the driver. Connect only a fully charged navigator to your computer. Due to a weak battery charge, the PC also does not detect the device.

6

The computer may not be able to see the receiver due to a malfunction of the device. The cause of the malfunction will be set only by the specialists of the service center. In this case, you need to repair the navigator or replace it.

0