How to use Wi-Fi
How to use Wi-Fi
Wi-Fi is a wireless transmission standarddata, the signal of which is transmitted through a special device called a router. Connection to the Wi-Fi network is carried out using a network card installed in the computer, a USB module or a modern mobile device.
Instructions
1
Wi-Fi is configured throughrouter (router) - a device that allows you to convert a wire signal from a fiber optic network or a modem to a wireless one. To create an access point, you must install the Internet cable in the WAN port of the router and make the appropriate settings. If the computer does not have a built-in network card that allows you to work with wireless networks, the router can be connected through the PC1-PC5 ports using a special cable.
2
Once the router is connected, you mustto configure it in accordance with the application instruction and the network parameters provided by your provider. Usually, for the connection configuration, open the browser and enter the Internet address of the form 192.168.0.1 or 192.168.1.1 to enter the device control panel. After entering the login and the administrator password, you can use the available functions to change the settings.
3
To use Wi-Fi through working onWindows operating system computer left click on the Internet connection icon in the lower right part of the monitor. Among the access points offered for connection, select the appropriate one. If necessary, enter the connection password and click OK. If the data was specified correctly, you can use the wireless connection and open Internet pages through the browser.
4
Similarly, connect to a Wi-Fi networkand runs on Linux operating systems. In the upper right corner, click on the connection icon. In the suggested list, select your wireless network, and then click Connect. If necessary, enter the network password and click Connect.
5
If you want to use your mobiledevice for Internet access via wireless protocol, go to the corresponding item in the settings menu. To turn Wi-Fi on Android, swipe down the screen and click the Wi-Fi icon at the top of the menu that appears. To select the active access point, hold your finger on the icon for 1 second. You will see the connection setup menu. Click on the line with the name of the desired connection and select "Connect" by entering the appropriate password.
6
To activate your iOS connection, swipe your fingerup on the Home screen, and then select the Wi-Fi option. Activate the wireless connection. In the list of available networks, select your access point and enter the required password. After making the connection, you can use the Internet from your mobile device.
