LovesTheTeam.com

You will need

• - two sheets of plywood;
• - planed boards;
• - wooden bars;
• - nails;
• - self-tapping screws;
• - Screwdriver;
• - a hammer;
• - hacksaw;
• - building level;
• - Roulette;
• - sandpaper;
• - antiseptic;
• - varnish.

Instructions

1

Prepare the necessary materials and tools. You will need two sheets of plywood with a thickness of 20 mm, from which the court (table top) will be made. You can not do without well-planed boards with a thickness of 30 mm. For the production of racks, use a construction beam measuring 70x100 mm. Stock up with a tool for woodwork and fasteners (nails, self-tapping screws).

2

Make stands for the future table. It is convenient to make them, taking as a prototype building goats. They will need two. From wooden bars, make four legs of goats. In this case, maintain the height, which should have a tennis table (760 mm). In the upper part between the legs of goats, place the horizontal bar. Support the legs of the rack between each bar. For greater stability, lay a bar also between these crossbeams. Secure all the components of the structure together with self-tapping screws and nails. The main requirement for the racks is to be extremely stable and not to stagger.

3

Get the court ready. Gently cut the two halves of the table from the plywood sheets. The size of the standard tennis table assembly is 2740x1525 mm. Therefore, the length of each half of the countertop should be 1370 mm. Beat the workpiece, operate the saw with care, so that no scoring and chipping of the material is formed.

4

Pick an even clean place on which tois attached table. Around the table should be free space, so as not to impede movements during the game. The approximate size of the playground is 5 by 7 m.

5

Install the goats-racks, that they were located on one level and strictly horizontally. The distance between the posts should be such that the center of the table top rested on each of them.

6

At the edges of the racks, lay two boards along the length of the table top and screw them to the goats with screws. On this base lay the sheets of plywood, dock them and screw them to the boards.

7

Sand off the worktop well sandpaperpaper and cover with antiseptic. Then coat the surface with paint and varnish. Now it was necessary to prepare a grid, tennis balls, a pair of rackets and in the course of an honest duel to determine who will become the champion on the new court.

You will need

• - Table for table tennis
• - Racket for ping-pong
• - Hollow ball for table tennis

Instructions

1

Draw a toss with the opponent, who is the firstwill make a pitch. Then the player, who won by draw, submits. At the pitch, the ball should touch first your side of the table, fly over the net and touch the side of the opponent's table. If the ball touched your side, but did not touch the opponent's side, the opponent counts. After the filing and the game itself is. Your task is to hit the ball sent by your opponent to your side of the table, beat it off so that the ball touched the opponent's side. The game continues until one of the players makes a mistake. Each player has two serveings, then the serve passes to the opponent, the opponents are constantly changing their serves.

2

Each error of the opponent gives one point to the player. You get one point if your opponent has hit a ball that has not touched his side of the table. You also get one point if your opponent incorrectly gives the ball, touches the ball with any part of the body, reflects the ball outside the table, can not correctly receive the ball sent to his side, twice touches the racket with one reflection or catches the ball with his hand, when reflection or submission will hit the net or the rack with the ball.

3

The game continues to 11 points, but with a difference ofaccount for more than two points. For example, with a score of 11:10 the game continues to a difference of two points. This is the party in table tennis finished. And rivals change sides. The game consists of 5 - 7 games.

You will need

• - two sheets of polished plywood size 1525h1525 mm, thickness 15-20 mm,
• - four boards 25 mm thick,
• - two bars with a length of 3 m with a section of 50x50 mm.

Instructions

1

Start work on the table with a rigid frame of 220x120 cm.

2

In the middle of the frame, place a wooden crossbar. Then, at the corners of the frame, fix the legs of the table of the same length, using self-tapping screws and carpentry glue. Make sure that the legs are installed symmetrically to each other, and the table is firmly on the floor or on the ground. Treat the frame and legs of the table with a special antiseptic impregnation on wood.

3

Make a countertop of prepared in advanceplywood. Cut the plywood sheets to 137 cm on one side, and then from the bottom side, fix on both sheets hooks, with which you can fix the sheets with each other. For strength, screw the plywood top to the frame with screws and corners for furniture. Paint the surface of the plywood with a grinder, and then polish and clean from dust and dirt.

4

Cover the countertop with a wood antiseptic inseveral layers, waiting for the drying of each layer and sanding each layer with sandpaper. Get the most solid and smooth surface of the table top, so that the tennis table meets all the requirements of the game.

5

After processing the countertop, install a tennis grid,which can be bought in a sports shop, with the help of clamps. The upper edge of the net should correspond to a height of 152.5 mm. Set the grid exactly in the middle of the table at the junction of the plywood sheets. The tennis table is ready.

What you need to play table tennis

Playing table tennis can be two, andfour participants. To conduct it you will need to find a ball, table, grid and 2 rackets, or go to the gym, specially equipped for this game. The cost of it can vary, but it is usually small.

The rules of the game of table tennis: what is important to know

Before the start of the game in table tennis playersdecide who will own the right of first filing. To do this, lots are often used. However, sometimes they carry out a series of punches, following which the player who scored the ball becomes a bowler. After filing, the ball must fly without hitting the net, get on the opponent's side and bounce one time, and then it can be beaten. The player must be with his racket behind the back line of the table with the racket. If, for some reason (usually inexperience), a pitch was made on the run or on the table, it is regarded as incorrect. In the event that the ball touched the grid or its stand when feeding, the serve is repeated, but the point is not awarded. In addition to the general time of the game, "re-feeding" is not limited to anything. Immediately after bounce the ball, submitted to the side of the player's table, he needs to beat him to the side of the opponent. This is the whole process of table tennis. This game is held until one of the participants is mistaken or he will not be able to beat the ball to the side of the opponent. As a rule, beginners have very quick rounds, but on the world stage professional sportsmen sometimes lead fierce fights. For every mistake of the player, his opponent gets one point. In addition, the conditions for obtaining points in table tennis can be: - reflection of the ball from the summer (without waiting for a rebound) - foul on the pitch - the opponent did not take the ball - the ball is reflected outside the table - the opponent several times touched the ball when beating - The opponent caught the ball on the racket and threw it back to the opponent - The opponent touched the net during the beating. The right to serve must pass from one player to another every 2 feeds. The table tennis rules provide for the victory of the player who managed to score 11 points before the opponent. In this case, the advantage should be at least 2 points. If during the game the score became equal to 10:10, the participants after each point scored change the right of submission, until they beat the opponent by 2 points. After the party, participants change sides, as well as the right of first filing. The game itself consists of 5-7 such parties. Table tennis is very energizing and raises the mood. In this game there are many tricks and techniques. It is also possible to use professional sports equipment. For example, rackets of different price categories and manufacturers can differ in their parameters, which will necessarily affect the game. Not surprisingly, more expensive equipment is more preferable, because it allows you to do different tricks and twists, in which you can and you need to defeat your opponents right from the first filing.

Clubs of table tennis

In the small sports arena "Luzhniki", in the hall number 1is the eponymous table tennis club. Nearby are the Metro station Sportivnaya and Vorobyovy Gory. For visitors there are showers, a cloakroom and a buffet. The club has the opportunity to play tennis with professional coaches. For individual sparring it is necessary to register in advance by phone 8 (495) 973 77 05. Also on this number you can find out about the cost of renting a table and the schedule of the club. Every weekend there are mini-competitions among those who wish. The table tennis club "Naten" is located at ul. Stromynka, 4, p. 1, 5 minutes from Sokolniki metro station. It is open daily from 10:00 to 22:30. The club conducts classes in adults and children's groups. There are individual training sessions. You can also rent tables - 1 hour for 350 rubles. Rent of inventory is provided free of charge. Weekly in "Natena" competitions take place among fans and professionals of table tennis. Club "Revival" for players offers 5 tables Butterfly, locker room, shower, modified robot simulator. There are group classes for children from 6 years old and adults. Individual sparring is also conducted. The table should be rented in advance by calling 8 916 531 12 96.

Where else can you play table tennis

In the sports complex "Frunzensky"there is a room for table tennis. For indoor games, there are five Donic tables. For classes it is necessary to have a change of shoes and a sports uniform. For more information call 8 (499) 242 84 02. At the Sports Palace "Commonwealth" for table tennis there are three Donic tables, two tables Butterfly and three tables T2023. Conducting classes for children and adults, providing services for sparring and renting tables. The palace is located on Novoyasenevsky Avenue, 3. Next to the Voykovskaya metro station on the street. Cosmonaut Volkov is the hall for playing table tennis "RusTT". The room has a floor with professional coating and tennis tables leading brands. It is open daily from 11:00 to 23:00. In addition, you can rent a desktop robot, tennis rackets, balls and a grid for running gear. Through a single inquiry service, you can book a table in advance and find out the prices for services. 8 (499) 159 05 87. The administrators of the hall conduct different tournaments every month.

Instructions

1

Rackets are of three types: • Racket with two overlays of the same type, but with different characteristics. This type is racket with two smooth overlays, but one overlaybetter rotates, and the other faster. • Racket with overlays of different types. These racquets are designed for active play, since a smooth overlay and a pad with spikes are used. The racket should be turned over while performing the feed. • A racket with an overlay that is designed to destroy the opponent's game and an overlay for active play. In most cases, a combination of a smooth patch and a patch with long spikes is used.

2

Lining.Smooth lining has a fairly strong grip on the ball, they are very elastic. The sponge layer, which became an obligatory component of such a lining, raises the catapulting force and gives the ball a complex rotation. The pads with pimples are designed for a higher pace of play. If you use them together with a smooth overlay, then this combination creates additional difficulties for the opponent. Today, the straps with long spikes have become quite popular, since they send the ball in an unusual way. The thicker the patch, the more spinning you can give the ball . But the racket will be quite heavy, its balance will be broken.

3

FoundationsFloor bases are made ofdifferent types of wood. They differ from each other in the following characteristics: speed of the ball, "sensitivity" and the possibility of "damping" the rotation. Standard bases are made of wood plywood, but some bases are added graphite or carbon. Such racquets have a higher speed of the ball, but they lose in "sensitivity".