LovesTheTeam.com

Instructions

1

Build a scale based on its size: waist circumference, thigh girth, leg length, step width, hem width (trousers), length from waist to subannual cavity, length of leg. Depending on the model chosen, make other changes. An example of the pattern is shown in the illustration, but you can use your model.

2

Cut out the details taking into account allowances for seams. Sweep and stitch the edges.

3

If necessary, sew a belt 4-5 cm wide. and a little longer than the waist with the "tail" for the button). It should consist of two parts. First, stitch them from the onsets from three sides (two narrow and one wide), then turn it over your face.

4

Sweep away the details of the trousers, including the zipper. Try it on. If everything is in order, stitch all the seams, turning the pants inside out. Smooth trousers, especially on the seams.

5

Sew the button and cut the loop. Sew the edge of the loop with an overlapping seam.

Instructions

1

In order to turn ordinary jeans into pants for pregnant women, you only need half an hour of free time. Take old, but whole pants and the tailor's scissors carefully cut off the belt from them.

2

Then take a piece of elastic jerseythe right color, the length of which is equal to the circumference of your waist, and the width is 15-20 cm. You can also use an old knitted skirt or jersey as a knitted yoke, from which the lower part is cut off. If you are making a coquette of simple knitted fabric, sew a cut into the ring.

3

Return to the trousers, from which you cut off the belt. Unlock the zipper and sew it by hand or by tying the cut of the fly. Unscrew pants inside out, and from the wrong side of the machine, attach the knitted coquette to their upper cut edge.

4

Treat the seams overlock or zigzag, and if necessary, insert the elastic band into the upper edge of the coquette, bending the edge of the panel and stitching it 2 cm from the edge.

5

If a piece of jersey for a coquette was toolight compared with trousers or jeans, and the coquette does not hold them on the figure, sew it with an extra rubberized thread and strengthen it around the waist, additionally stitching several times on the typewriter. Similar pants will be a comfortable and beautiful piece of clothing for you during pregnancy.

You will need

• - Pattern;
• - tape measure;
• - the cloth;
• - a pencil;
• - a piece of chalk;
• - thread;
• - a needle;
• - scissors;
• - pins;
• - lightning;
• button.

Instructions

1

To begin with, you will need a pattern on paper. You can build it yourself, but you can copy it from the magazine or download it from the Internet. Working with a finished pattern will greatly facilitate your task and save a lot of time. For the riding breeches, you will need to draw the front and back parts. The other elements (belt and loops to it, pockets, lacing details, etc.) are optional. Cut them out at your discretion. Merki are removed almost the same as for any trousers. Measure the circumference of the waist, hips and mid-thigh. You also need to know the height from the waist to the surface of the seat, the length of the pants at the front and side. When removing the trouser measurements for breeches, measure the length from the waist to the knee line. Circumference of the knee and calf is considered tight, but leave it on the allowances not less than 2-3 cm. Halife can be both shortened and long. In the second case, then measure the ankle volume according to the method described above.

2

When the paper pattern is ready, transferher on the cloth. The material for tailoring modern riding breeches can be absolutely any. Circle all the details with a tailor's pencil or crayon. When cutting, leave a few centimeters on all sides for allowances.

3

If you are sewing simple breeches without additionalelements (for example, without laces, pockets), they are sewn in the same way as any other trousers. Both parts are folded to each other face-to-face and are spread over all the lines. If you separately cut out the belt, sew it. But if you still had patch pockets, do not forget that they are sewn up before the main parts begin to be worn out. Of course, you can sew a forgotten pocket later. But then you better do it manually. The final but very important point is sewing lightning and / or buttons.

You will need

• - 1,2-1,5 m of fabric;
• - thread in the tone of the fabric;
• - English pins.

Instructions

1

Build a pattern of classic trousers inaccording to your standards. If you believe that this is too difficult for you and for a long time, then reseat the pattern from the fashion magazine. The drawback of this method is that the finished drawings are built on a standard figure. You can make some changes to the finished pattern, based on the characteristics of your physique.

2

Arrange the pattern details on the wrong side of the fabric, circle them with a special tailor's chalk or sliced, cut, leaving the allowances on the seams and cuts at 1.5 cm, and for the hem bottom - 3 cm.

3

Then proceed to sewing side pockets. Sack the sack with the front half and stitch along the entrance to the pocket. Unscrew it upwards and adjust it close to the seam at the seam allowance. Now unscrew the burlap on the wrong side. Place the side part on the transfer part, align the entrance to the pocket with the marked line on the side and grind the parts with safety pins. Sew the slices of burlap.

4

On the back and front halves, tuck offand iron them to the line of the middle of the part. Fold the front and back halves to each other in pairs. Stitch the step and side seams, treat them with an overstitch suture and iron.

5

One leg pivot on the front side and put them into each other. Then combine the step seams and grind the seat line to the fastener label. Stitch the seam with a seam and iron.

6

Then sew the zipper. To do this, iron on the wrong side of the whole-cut sections of the cut, with the right side facing along the mid-transmission line, and on the left-hand side, not reaching 5 mm to the midline line.

7

Pritachaite left side of the zipper under the edgeallowance, clasps of fasteners should be located close to the fold. The right side pratachayte to obtachke, without grasping the detail halves of trousers. Pull the right half of the trousers along the marking along the fastener.

8

Pritachayte to the upper sections of the belt. Zoutjuzhte allowance in the direction of the belt. Fold it along the front side inward and sew short cuts, cut off the corners close to the seam, unscrew the belt.

9

Turn the bottom section on the wrong side,manually and line the line from the front. Try to do it exactly in the stitching seam. As a fastener, sew a hook or a flat button.

10

Align on the underside side allowances to the hem of the bottom and sew it by hand with a hidden seam. On the finished product, press the "arrows".

You will need

• Threads, cotton fabric, elastic band, sewing machine, centimeter tape.

Instructions

1

In order to sew the wide pants, do not even have to do a pattern. Take the fabric and cut out of it two rectangles 100-110 centimeters in length and 75-110 centimeters wide. You can change the sizes based on the width of the pants you want.

2

Put both rectangles of fabric together andfold in half vertically. Then mark along the fold line upwards about 70 centimeters and on both sides for ten centimeters. Combine these marks with a smooth line and make a cut along them.

3

Stitch the edges of the cutout with each other. After that, sew the opposite sides of the rectangles of the fabric. If you did everything correctly, you should get two distinct pipes, connected along the cut-out line.

4

Make the folds at the bottom of the pants and on the belt, sew. Insert the elastic bands into the belt and into the lower edges of the pants.

5

Sew a similarly wide pants-Afghani. You will need a piece of cotton cloth measuring 80 * 200 centimeters, an elastic band of 2.5 meters and threads for the color of your fabric. On the edge of the fabric zigzag on the sewing machine or on the overlock.

6

Next, label from the edges of the fabric on both sidessegments of 60 centimeters. Fold the fabric diagonally and bend the edges towards the nearest sidewall, secure with pins. Then sweep and stitch on the typewriter.

7

Take two strips of 64 centimeters (pluson 2 centimeters allowances on lateral seams) or one 122 sm and width of 24 sm for manufacturing of a belt. Stitch seams and fold it with the top edge of the trousers to each other face. Fold the belt in half, stitch to the main product, bending the allowance for the seam inward.

8

On the belt, make two lines so that they are dividedwidth to three identical segments. Take an elastic band of the length that corresponds to the volume of your waist, insert three gums between the stitches made.

9

Cut the edges of the trousers one and a half centimeters and insert the rubber band there. Its length corresponds to the volume of your ankle. You are ready for fashionable wide pants-Afghani.

Instructions

1

Banana trousers are fashionable and comfortable. They can be put to work, for a walk, for a visit, for a holiday, for a disco. Its name was given to this trouser model from the fruit of the same name for an amazing external similarity: an assembly on the hips and a narrowed silhouette downwards.

2

Pants-bananas are elongated and shortened (up toankles), therefore it is recommended to wear them only with a high heel. These models of trousers can be worn with many things. The main thing is to show imagination in choosing an image.

3

Light banana trousers can be worn with leatherJackets and even with a biker jacket. In the cold season it is better to put on trousers made of heavy fabric. With them, boots, ankle boots and high-heeled boots will look good. In summer it is better to choose bright models from light fabric. With them you need to wear sandals and sandals, decorated with a lot of straps. Upstairs you can wear a T-shirt or T-shirt, as well as a fitted blazer or fashionable jacket.

4

Pants to the ankle will look great withankle boots with very high heels or with shoes on the stud. Upstairs put on an army jacket or a short cardigan. You can choose another ensemble: a T-shirt with multilayer effect and belt-chain. Since often banana trousers create an additional body volume, the belt must necessarily be included in the outfit in order to favorably emphasize the waist region.

5

If you put on pants-bananas longstyle, they will look good with a short jacket or jacket. Perfect fit jacket, waistcoat made of fur or leather. Another combination: a knitted pullover or a sleeveless jersey with a jacquard pattern, ankle boots with an open nose and lacing. With trousers-bananas blousons with a girdle and shirts also look good.

6

Although "bananas" come with many other things, but do not need to overload them with various accessories and details.

What is hidden pants

Pants with a high belt are good first of all,that they emphasize the waist, visually narrowing it due to the smooth line of the thighs. If the trousers also have pincers from the hip, the abdomen and excessive fat deposits disappear magically. This happens, of course, provided that the pants are sitting freely, and do not tighten you, like the breeches. Complete the composition of a wide belt, correcting and pulling the figure. Thus, trousers with high waist, especially made of a dense fabric of dark color, are simply created for corpulent ladies who want to hide something, in their opinion, superfluous.

How to grow a whole head

Another group of those who simply have pantswith an overstated waist - ladies who want to add themselves at least a few inches of growth. It is these trousers, worn even with shoes on a flat course, visually lengthen the figure by a couple of centimeters. And if you put a high heel under them, then the growth will increase almost on your head. In addition, the people around you will invariably admire your long legs, not even guessing how in some cases they are not right.

How to find a waist

Ladies with the figure "rectangle" or "apple"dream of a thin waist and sometimes torture themselves with diets, just to see her on their body at least once. This opportunity they will provide properly matched trousers with an overstated waist. Sufficiently rigid wide belt and coquette or trinkets that emphasize the hips. A similar style can be recommended for those who consider their hips too narrow.

With what to wear?

Pants with high waist, especially dark -A classical basic model that allows for a variety of top options. These can be blouses of simple, romantic or shirt cut, and tops of various shapes, and turtlenecks.

Jacket can be worn as a very short, barely covering the waist, and long, almost to the hip. It all depends on the individual characteristics of the figure.

Shoes can be both flat and high heels.

Some people like Shorter

Another great option for all figures andages - shortened trousers-kyulots with high waist. These trousers are not the first year on the fashion podiums, but they are not going to leave, they are so fond of the ladies. Kylots, especially flared from the hip, are very similar to the midi skirt, so they can easily fit into a strict dress code. This is an exceptionally convenient option for the autumn mudslide: high boots can be easily wiped under the culottes, but on the trousers there will be no spot.

Do not forget about the heel

The flap from the hip is in fashion today and looks goodpractically on any figure. However, do not forget that the wider the pants, the higher the heel. Otherwise, the width is able to "eat" a few centimeters of growth.