LovesTheTeam.com

You will need

• - girth of the waist;
• - length trousers;
• - pattern trousers;
• - chalk or soap;
• - scissors;
• - trouser fabric.

Instructions

1

If you are using a ready-made pattern, specifylength of the rear and front parts. This is due to the fact that many patterns are designed for averaged figures, and the length of the legs may not coincide with your size. So put on the shoes you are going to wear pants, and measure the length of the leg from the waist to the ankle by the side. By this measure, comparing with the size on a pattern, extend or shorten the details of the pattern.

2

Wrap the fabric with the front side inward along the longitudinal texture. Lay the paper patterns in line with the lines indicated on them.

3

Mink patterns with allowance for allowances for seams. For side and step cuts, the seam for the seat is recommended to leave allowance for 1.5 cm, all the upper parts make 1 cm more, and lower cuts of the trouser allow 3-4 cm.

4

On the fabric, cut a rectangle with a widthtwice the width of the belt, taking into account the allowances and the length of the full waist with the allowance of 7-8 cm. For example, if the waist is 70 cm and the width of the belt is 3 cm, then a rectangle with a width (3х2) + 2 = 8 cm will be obtained, and its length will be 70 + 8 = 78 cm.

5

Cut out the details of the classic trousers and translatechalk lines on the second side. In order to translate the reference marks, make incisions of 2-3 cm depth according to the allowances. Toss the dots with chalk to the other side of the fabric.

Tip 2: How to sew classic men's trousers

According to the stereotypes, classic pants fitonly for office. However, today the majority of the stronger sex, who want to look spectacular, are increasingly choosing this model as their everyday clothes.

You will need

• - trouser fabric;
• - sewing machine;
• - fastener.

Instructions

1

Take for sewing classic trousers monophonicor in a thin longitudinal strip of trouser fabric made of woolen or mixed fibers. Dissolve the two front and back halves of the trousers, obtachku cut, as well as two parts of the slope and the side of the front half, one-piece with baggy sack.

2

Sweep out the darts and weep them. The depth of each dart should be pressed to the line of the middle seam. Then proceed to the manufacture of side pockets with detachable barrels. Fold the burlap face-to-face with the front halves of the trousers. Along the entrance to each of the pockets, run a stitch and turn to the wrong side.

3

Stroke the entrances into the pockets, away from the seam line0,7 cm. On the alignment lines, place the front halves on the side parts and pin or sweep. Sew slices of sacks from the underside of the trousers. Scratch the burlap under the front halves.

4

Perform step and side seams. Straighten the stitch down from the cut mark for the zipper to the seam. Sew the zipper. To do this, fold the obtusement with the front left half and add it with the faces.

5

Then unscrew the obtazku inside out, and the edge prutyuzhte. The allowance along the right side of the cut is pressed to the wrong side, leaving a half centimeter to the allowance under the clasp up to the mid-transmission line.

6

Sew the buckle under the edge of the allowance, positioningdenticles densely to the fold. Beat the edges of the cut. Free braid pritachayte to obtachke, not grasping the left half of the trousers. Twist the left half along the fastener.

7

Sew the rounded slices of the slope. Turn it out and pin it to the cut allowance. Set the allowance on the slope, close the zipper. Extend the finishing line to the bottom edge of the fastener, grabbing the opening.

8

Make a cloth from the fabric, which thensweep to the top of the product. Sew a belt, lay a stitch along the back middle seam. Press the lapels on the wrong side, stitch or sew them by hand. Wrap-arrows prutyuzhte.

Tip 3: How to pick up trousers

A good pair of trousers can give your figureIdeal look, even if your body is not as perfect as you would like. The desired tail will add length to the legs, hide the bulges not needed and emphasize the pleasant roundness. It remains only to understand what it is - your ideal cut.

You will need

• Objective view of your own figure
• Wide selection of trousers

Instructions

1

If you have a soft bulging belly, avoid trousers with decorative folds, with pockets and zippers. They will give you an unnecessary volume and emphasize even an easily planned completeness.

2

Everyone knows that black - slim, but do you know that the same effect can give peach, beige, dark blue, deep blue, bright pink and khaki shades? Now you know.

3

Short legs visually lengthen the dark pants, pants in a thin vertical strip and velvet pants. Avoid pants-cigarettes, capris and breeches.

4

If you are too thin and your legs are too thin, choose pants Klesh, expanding from the knee and creating the illusion of exciting bends.

5

The classical length goes to all. How to define it for you? Pants should cover the backdrop of your shoes, but in any case not fold on the ankle.

6

If you have voluminous hips, choose wide straight lines that are freely draped pants. Discard pants with pockets at the back.

7

If you have narrow hips, choose pants with a wide belt and decorative pockets. They will emphasize your waistline and give extra volume to your hips.

8

Pants of good quality and successful cut, as a rule, have silk lining to the knee and are sewn from expensive natural fabrics, such as linen, wool, silk and cotton.