Tip 1: How to make a bracelet from beads

Hobby

Tip 1: How to make a bracelet from beads

Beading is a very popular and affordable handcraft. From beads - small beads - you can make a variety of crafts and jewelry: beads, earrings, necklaces and, of course, bracelets.

Bracelet "Braid"

Weaving this decoration is very simple, with itthe novice needlewoman will manage, and even the child, but the product is very effective and stylish. Choose beads of 3 colors in one color scale or contrasting shades. For example, it can be turquoise, blue and white beads. Also prepare everything you need for weaving. You will need: - a kapron thread, - a thin needle, - a clasp, - scissors. Cut off 6 threads of 30 cm length. Thread one bead, 5 cm from the edge. Tie a knot under the bead or thread it through it twice to fix it to the threads.

It is very convenient to string beads, if you apply glue to the tip of the thread with glue or nail polish.

String the beads of the same color on the string. The length of the thread should be equal to the value of the wrist circumference plus 2-3 cm, this is approximately 16-18 cm. Under the last bead, tie a knot. Similarly, make 6 threads of 2 same colors. Lay all the threads together. Divide into 3 parts and begin to bind them with an ordinary pigtail. The remaining ends of the threads from both ends twist, string them a few beads. Attach the fastener. Cut off excess threads. Such a bracelet can be decorated with unusual beads, buttons, small pendants with inscriptions or an image of an animal.

Bracelet "Crystal Drops"

To make this bracelet except the beads to youneed cut faceted beads of a larger size (4-8 mm in diameter). This decoration looks very impressive, if you use multicolored faceted beads and monophonic beads. Also you will need: - a nylon thread or a fishing line - a thin needle - a clasp for a bracelet - scissors. Cut a thread about one meter long. At the end of it, fix one bead by pulling the thread through it two times and tighten it. The pattern of beadwork is quite simple. String 6 beads and 1 bead. Thread through 6 beads again. As a result, they must skirt the bead on one side.

To make the beads do not slip, put it on a flap of flannel, knitwear or velvet.

Type 3 more beads and 1 bead and stretchThread through beads 4, 5 and 6. Then stretch the thread through the beads, typed last and tighten everything. Continue weaving the links of the bracelet in the same way to the desired value. At the end of the weaving, fix the thread and fasten the fasteners on both sides of the bracelet. Cut your extra tips.

Tip 2: How to make a bracelet from wire

Bracelets today are fashionable and popularaccessories. The most in demand use homemade products. Such decorations are made in a single copy, most often - on an individual sketch. One of the most plastic materials for creating a unique bracelet is wire.

A simple way to create a beautiful bracelet

Bracelets from a wire strike theirdiversity. Some products are very simple, others represent the top of jewelry art. Numerous curls, spectacular flowers, multi-tiered designs can only be implemented by skilled craftsmen. Beginning handymakers experienced colleagues advise to practice in simple forms. A beautiful wide bracelet you will get from wire and beads. In addition to these materials, you will need pliers with sharp tips. Beads choose multi-colored so that the product will turn out bright and noticeable.

Pliers with sharp tips - the main tool for creating ornaments from wire. With their help wizards make beautiful curls, rings, fasteners and other decorative elements.

Wrap the wire several times around the wrist. You should get a kind of spiral of the chosen width. Cut a piece of material, leaving 2 cm on each side for fixing loops. One end bend with pliers into the eyelet. String beads on a spiral base. When it completely disappears under the colored parts, fix the second tip. A fashionable wire bracelet is ready. Note: in addition to beads / beads, you can use pearls or tape winding.

Spectacular bracelet-recognition

Today in fashion laconic bracelets made of wire,in the middle of which it is bent into a word. Most often there are classic "love", "kiss", "baby", etc. Such a bracelet looks cute, beautiful and girlish.

Bracelets made of wire are very unpretentious and will fit almost any image. Before creating an accessory with a word, draw a sketch to accurately understand the directions of the bends.

To create this bracelet is rarely usedstones, beads and other decorative elements. Wrap the wire around the wrist and add to the resulting result a minimum of 10 cm. Cut off the piece of the base. To twist a word consisting of four letters, find the middle and back away from it in two directions an equal amount of centimeters. Mark the place of the beginning. Take the pliers and, according to the preliminary sketch, start to manipulate the wire in the right direction. At the junction of the letters, press the two parts of the wire together slightly so that they do not separate. When the word is ready, try on the bracelet and cut off excess length, leaving only a couple of centimeters for the fastener. Make two loops and thread through them a beautiful satin ribbon. So the decoration will look really romantic.

Tip 3: Stylish decoration: bracelet-ring

A bracelet and a ring in one decoration - such a tandemhas become popular for a long time already, we have been in demand for the last couple of decades. Indeed, in popular Indian films, you can often see on the heroines a beautiful bracelet and a ring, which are connected together by several chains.

Slave Bracelet

Of course, such an interesting decoration has its name - slave-bracelet. It is worth noting that slave means a slave. After all, this decoration is somewhat like shackles.

Usually a beautiful bracelet wraps around the wrist, fromHe leaves one or more chains with a ring, which is already put on the finger. But you can meet other options slave bracelets. For example, the ring may not be - from the bracelet is a chain that wraps around your fingers. You can see bracelets where there are several rings at once, and instead of a chain there can be a satin ribbon, a beautiful metal insert with intricate patterns or even an ordinary thread, on which all sorts of beads are strung.

Material of slave-bracelet

Such decorations are most often made ofmetal. In the Arab culture, according to tradition, valuable types of metals are used. The Arabs have a tradition that after a divorce a woman can leave only what she wears. Therefore, there is nothing surprising in that there the ladies wear a sliver-bracelet made of silver and gold, in addition such jewelry is generously flavored with precious stones!

In the shops you can find different options for braceletswith a ring. For example, jewelery from silver looks refined and elegant. This option is suitable for a warm time, because the silver is in perfect harmony with clothes made of colorful light material! And in general - in summer and spring you can fully demonstrate the beauty of your female hand by wearing short-sleeved clothes!

In the segment of jewelry there are also many optionssuch an ornament. After all, not everyone wants to spend a lot of money on jewelry! Often jewelry is made with imitation of silver and gold. You can even buy homemade variants from beads and beads, or you can make a slave bracelet yourself!

So if you like decorating your pens with bracelets and rings, then buy yourself a "two in one" - such an ornament is also very convenient!

Tip 4: How to make a bracelet of threads and beads

This step-by-step master class will help you to weave a beautiful bracelet from threads and beads. All lovers of baubles will be appreciated.

You will need

Threads, beads, scissors, button or large bead.

Instructions

Take strong thread, fold it several times in half.

Tie a knot, cut off a piece of thread with scissors. As a result, there must be three threads.

From three threads weave a small piece of pigtail. Then start to string the beads.

Plette the pigtail already with beads.

Weave the bracelet to the desired length, at the end, also tie a knot.

At one end, insert a button or a large bead, on the other - make a loop, which will be inserted bead. The clasp turned out. A bracelet made of threads and beads is ready!