How to make a hanger for small things
How to make a hanger for small things
Always everything can be used. Even the remains of the wooden slats are no exception - they can be made of a small coat rack for small items.
You will need
- - Wooden rack with a width of 4 cm;
- - finishing nails - 10 pcs. 1.2 x 20 mm;
- - Wooden clothespins - 5 pcs;
- - a small pot of tea;
- - Self-tapping screws for wood - 1 pc;
- - white acrylic paint;
- - multi-colored acrylic paint;
- - hot melt;
- - a jigsaw;
- - a hammer;
- - ruler;
- - a pencil;
- - screwdriver;
- - sandpaper.
Instructions
1
So, first of all you need to cut the necessarydetails: 5 slats 4х17 centimeters and 2 slats 2х40 centimeters. All short parts should be sharpened with a jig saw on one side, that is, cut corners. After finishing the cutting of the workpieces, treat them with sandpaper to remove irregularities and roughness.
2
Obtained parts must be painted with white acrylic paint. For coloring clothespins, use different colors.
3
Now we need to collect a future coat hanger for small things. To do this, attach with the help of nails short rails for long so that they are at the same distance.
4
To be convenient to attach clothespins to the hanger, you need to disassemble them. Nail them with the side where the spring is, then collect.
5
In the jar from under the tea,that it was below the edge by 0.5 centimeters. Now through the hole obtained, attach the jar to the hand-made article with a screw. To prevent the bottom from hanging, glue it to the hot melt. It remains to nail the product to the wall. The hanger for trifles is ready!