How to sew a dress-tunic for half an hour
Dress-tunic is free cut, therefore at its creation it is not necessary to do a dart. Clasp this apparel also not needed. All this will save time and quickly sew a trendy new thing.
The dress tunic is comfortable. It does not fetter the movement. It takes a little for the product. You need to buy a cut equal to two lengths of the future product. For him, even a narrow cloth with a width of 90 cm is suitable. If you are different in magnificent shapes, get a cut, the width of which is 120-150 cm.
Take as a basis a T-shirt
If you have a pattern pattern, fine. If it does not exist, this is not a problem. Take the T-shirt, which sits on you freely not fitting. If you do not have one, take it for a while from her husband, who is bigger than you. Lay the fabric cut face to face in half in width. Attach a T-shirt, straightening her sleeves, grind with pins with pins. Extend the T-shirt down to the desired length, drawing two vertical lines with a ruler. Cut out the fabric along the contours of the T-shirt and the extension lines, leaving a margin of 1 cm on all sides, and a 3 cm hem on the hem. Cut on the back, since this part has a smaller neck. Set aside this detail to the side, take the cut out shelf (in front). Pin to the top of the detail of the neck of the T-shirt, make a cutout along it. The rest of the parts remain the same as you cut them before this. From the remnants of the fabric, make 2 patch pockets. To do this, cut out two pieces measuring 17x20 cm. Take a piece of cardboard 15x17 cm. Place the detail of the pocket on it, smooth the edges. Detach the top of the pockets. Sew them from the sides of the shelf. It is necessary to cut out the obtacle for the decoration of the gate. Attach the front and back of the throats to the remains of the fabric. Outline them, cut out the wrap around 2.5 cm wide Fold the shelf and backrest face-to-face, sew them on the sides. Pull off the edges of the solid sleeves. Sew a transfer obtachku and backrests between each other on the sides. Attach this part to the front of the neck, grind, iron the seam. Flip the obtacle so that its underside is on the wrong side of the neck, bend the edge, sew the obtack. Bend the knives on your hands or stitch them. The latter option will help you sew a tunic more quickly. Stitch the seams, the product is ready. With or without a pattern
If there is no T-shirt, redraw the pattern ontransparent paper, cut these 2 items, apply to the fabric and in the same way cut, stitch. If there is no pattern, measure the hips, divide this figure in half, add 6 cm. Draw a rectangle of the desired length (it is equal to the length of the tunic), its width is just the figure you just got. In the middle, at the top of the small side of the rectangle, draw a circular cut. Next, the shoulder line. It extends sideways by 18, and down by 15 cm, then again goes to the rectangle horizontally by 18 cm. A sleeve of 18 lengths, 30 cm wide (15 and 15), was obtained. This is the detail of the transfer. Similarly, cut out the detail of the back, making the neckline not so deep.
