Tip 1: How to sew a doll to Tilda the Ballerina

Hobby

Tip 1: How to sew a doll to Tilda the Ballerina

The creator of the idea of interior toys Tilda -Tony Finnanger. She published about a dozen books in which patterns and descriptions of pretty dolls sewn from fabric were published, which won the hearts of many needlewomen around the world. Tilda Ballerina - light and airy - will become an ornament of the house.

Materials for sewing dolls

The Tilda doll of the Ballerina has a silhouette similar to the othersdolls Tony Finnanger, so in principle you can use any suitable pattern, but it also has its own characteristics. The figure of the ballerina is slim, the silhouette is light and airy, so it's best to make her own pattern for her. Moreover, it is very easy to do this. It is enough to enlarge the drawing and print it on the printer. In addition to the paper pattern, you will need: - cotton fabric of solid or beige color to make the body - tulle - fabric for the bodice of the dress - thin satin ribbons - lace - scissors - threads - needle - sintepon - sewing machine; - Acrylic paint for textiles - Blush.

Production technology Tilda Ballerina

Dissolve the fabric. Fold the material face down, attach the patterns of the body of the doll, circle them with a pencil and cut, leaving 0.5 cm for the allowances in all sections. The details of the front and back of the trunk of the doll are cut from the decorative fabric for a ballerina dress. On the front part of the trunk on the upper cut, place 2 small counter folds. Align this part with the bottom section of the head piece and grasp on the sewing machine, gently distributing the creases. Sew the detail of the back to the head, combining the slices. Connect the prepared details for the ballerina's torso and grasp them on the sewing machine, leaving the underside and shoulders unmarked. Unscrew the detail on the front side and tightly fill it with the sintepon. The details of the ballerinas' arms and legs are folded inward and stitch. Turn them to the front side and lightly fill them with filler. Insert the parts into the holes left unenclosed on the body of the doll. The allowances are folded inwards and sewed, connecting the details of the trunk and arms, trunk and legs with a "forward needle" seam. Mark the middle of the hands and lay a couple of stitches in this place to get the folding points. Similarly, make the folds of the legs in the knees. Sew the bundle. From the tulle cut out a few circles with a diameter of 10 cm (the more their number, the more magnificent the skirt will turn out). Fold the circles 4 times and cut the arc, 0.5 cm in diameter, fold the blanks for the bundle together and sew with small stitching stitches along the belt line. Put on the skirt on the doll and sew it to the waist line with a hidden seam by hand. Decorate the seam with a satin ribbon. Make pointe shoes. On the legs of the ballerina, draw the shoes in the tone of the dress. Sew a thin satin ribbon. Tie her leg crosswise and tie a beautiful bow. Draw a face and make a hair doll. Draw lines of a smooth hairstyle, like a real ballerina, paint all with acrylic paint of black or brown. Draw 2 dots that mimic the eyes. Blush the round cheeks. Decorate the Tilde's hairdo with artificial flowers and lace in the tone of the dress.

Tip 2: How to sew a doll

A doll stitched with mother's hands will giveThe child is warm. Such a toy no one else has, since it is created in one copy. Experienced masters can make a doll with three-dimensional features. For beginners, a simpler version is suitable.

You will need

- the cloth;
- thread;
- scissors;
- A needle.

Instructions

If you are still an inexperienced needlewoman andwant to quickly make a doll for a child, then take a light monophonic handkerchief or a cloth the size of 30x30 cm. The edges of the fabric must be sewn, they have already been processed by the scarf.

Put in the middle of the canvas, on his purlSide, a piece of cotton wool the size of a child's fist. Turn out the fabric on your face, tie a thread of cotton wool in the fabric so that the head of the doll turns out. Draw a blue felt-tip pen on her eyes, and in red a mouth. Tie a small handkerchief. A doll sewn with its own hands is ready.

If you have enough free time, and youWant to make a more complex toy, then why do not you sew a Waldorf doll? First create a toy head. If there is an unnecessary pair of old children's knit pantyhose, then cut off from it a piece equal to 20 centimeters. You can replace this part with a flexible bandage. Cut from it 2 strips of 20 cm and sew them on the sides.

Drag from below with thread and tightly stuffThe resulting bag is a syndepon, thread or batting. Sew the upper part of the head. Now take the thread and shape the face of the toy. Drag it a line, where later there will be eyes. The second thread will pass from the crown of the neck, the third - from the temples to the neck.

Take the knitted material white orflesh color, from which you will sew a doll, and fold it in half. Attach the profile of the head preform to the fold and outline the occipital part on the main tissue, leaving the allowance for the seam.

Sew the occipital part of the workpiece. Put the main part on the one that was created from the elastic bandage or pantyhose. The folding line of the fabric should be on the central vertical part of the face. It passes through the middle of the forehead, nose and mouth. Seam - on the back of the head. This finished workpiece is a stocking with a sewn up occipital part.

Drag the thread horizontally to the chin line so that there is a small piece under it - this will be the neck. Also tighten the bottom part of the thread.

Embroider 2 eyes with a blue thread. First, form one, and then stick the needle into the inside of the head and make the second eye. With a red thread, embroider your mouth. Leave all nodules on the back of the head.

Open the hands of the doll, sew them on the wrong side,turn out the details, fill with a syndepon and sew to the bottom of the neck. The front and back of the toy are cut symmetrically. Each of them consists of a rectangle (body) and legs emerging from it from below. Sew these 2 pieces, leaving the holes of the hands and head intact.

Nabeyte the body and legs syndepon. Combine this part with the previous one so that the hands of the doll go into the hole and come out. Neck the neck into the throat opening of the body and also sew this part.

It remained with the help of threads to make doll hair, put on her beautiful outfit, and the toy is ready.

Tip 3: How to sew a doll-tilde

The cute charm of the tilde doll attracts more and more people all over the world. For enthusiastic people, this inexhaustible world of inspiration, because this textile doll is sewn very quickly.

Instructions

The whole secret of the charm of this doll is in its littlenon-standard pattern. After the fabric for the body and clothing is selected, accessories are selected and facial paints are found, you can start sewing. First, after finding the right pattern, you need to print it out or transfer it to a white sheet of paper directly from the monitor, attaching the paper to it and circling all contours and symbols. Cut the pattern and transfer it to the fabric. A doll-tilde can be of a variety of subjects: a ballerina, a princess, an angel, a vegetable marketer, a bather, a bride, an angel. Tilda can have the image of a rabbit, a seal, there are very nice tilde-beetles and a snail. The choice is unlimited and everyone can sew the tilde that he likes.

After the contours of the doll are transferred from thePatterns on a fabric, them cut out on contours, leaving allowances on seams. Sweep or chop pins, not forgetting the holes for eversion, which must be left unguarded. Stitched with a small line on the machine, taking the thread in a tone, or sewing by hand, also with small dense stitches. On the seam allowance, after the stitching, incisions are made in those places where the seam is strongly bent or forms an almost right angle. This helps avoid subsequent deformation of the product in this place. The details are turned to the front side and carefully ironed with hot steam. Handles and legs need to be turned out very carefully, on sale you can even find a special device for turning out such small parts, it really helps in the work.

In order for the tilde arms and legsbend, stuff them with a little trick. First, tightly packed in half, in this place, according to the rules of anatomy, there are elbows and knees, then thread the sticks and legs across the stitch in a tone, and then stuff it to the end. For packing is most convenient to use holofayber or wool, ordinary sintepon is not very suitable for this purpose, as it must first be cut into small pieces. And even crushed in this way, in consistency, he is much inferior to the holofayber balls.

The stuffed legs are inserted into the hole at the bottomtrunk, after which a line is fixed, fixing the structure. To the body by hand a secret seam is sewn on the handles. Ready tilde can only dress. For this, a cut of the selected fabric equal to twice the width of the tilde and the designed length is taken, folded in half, its sidewall stitched with the front side inward. Then the dress is turned out on the front side, the hem and the upper part are pressed and secured with pins or an offset seam. The hem is stitched at once, the offset seam and pins are removed. The dress is put on a figure, the folds along its upper edge are fixed with pins. As a rule, dresses on tildes with an overstated waistline or sarafan with a belt.

The fabric for the girdle is folded in half along,face inside. In this position, the workpiece is smoothed, swept and sewn together with the required hole for eversion. The belt turns out and is again ironed, the hole for the eversion is carefully sewn with thread in the color of the fabric with a secret stitch. Tie a girdle around the dress, fixing it with a few stitches. It remains to make a hairstyle and draw doll eyes and blush.