Tip 1: How to make a cigarette case

Tip 1: How to make a cigarette case

Cigarette case It is a small box in whichit is convenient and easy to fit a few cigars or cigarettes, stacked by the owner under a special rubber band. To date, you can not afford to buy a cigarette case by anyone: it's worth a lot of money. Typically, these products are given to birthday people or people occupying executive positions. But to make such an accessory with their own hands can absolutely everyone.

How to make a cigarette case

You will need

  • Two lime or oak bars of small thickness;
  • -special tool for cutting wood;
  • -The wide elastic band is bright;
  • Tracks;
  • -glue;
  • - loops;
  • - Velcro strip;
  • - beads or rhinestones.

Instructions

1

Take two lime or oak bar smallthickness. Cut (scrape) on one and the other prepared bar small depressions. This can be done with a special tool for cutting wood. With this recess, you can make a square or rectangular shape, with pointed or rounded corners.

2

Make each of the sides of the cavity,exactly in the middle, a small through cut, that is, a hole. You should get 2 holes on each half, which are strictly parallel to each other.

3

Take a wide elastic band, preferably a bright color, as it will not only be a cigar holder, but also an ornament of an accessory.

4

Put the elastic band in the prepared holes so that it passes through the inside and outside of the cigarette case. Do this with one and a second wooden half.

5

Fasten the elastic with the inner threadside and move the seam to the hole through which it passes so that it is hidden. You should know that the elastic band must be tightened so that tobacco products can be held under it.

6

Attach small loops using studs that will allow the cigarette case to open and close unhindered. Such loops can be purchased at any construction store.

7

Glue a strip of Velcro from the back of the loops, which will allow the cigarette case to be closed even when moving.

8

Decorate your ready-made cigarette case with beads, rhinestones, carvings, stickers or other decorative elements.

9

Put rubber cigarettes and enjoy your work, showing it at every opportunity to your friends.

10

Attention! To make a unique cigarette case, you can use a hard drive, a case from a player or phone and other handy small boxes.

11

Over time, all things change,are transformed and improved, but the cigarette case appears to us every time in its original, seemingly unchanged form. Probably, nevertheless simple and perfect design of cigarette case does not need modification, and its owners are accustomed to seeing this tobacco accessory in its usual form.

Tip 2: How to make a holder for your phone with your own hands

Cell phone has become an integral part of lifeof people. A convenient device, large or small, expensive or not, it performs its functions. Only many face the problem that the phone is lost in the apartment, and to find it you have to call it. This problem can easily be solved by buying a stand for the phone. But some people prefer not to spend extra money and make a stand or holder for a cell phone themselves.

How to make a holder for your phone with your own hands

Plywood holder

To make this holder you will needthin plywood, two bowls, the same shape, but different diameters, scotch, stain or paint for wood, lacquer, PVA glue. On the plywood circle the contour of the hand - your own or someone else's - with slightly diluted fingers. Then you should cut your hands. For cutting, it is best to use a jigsaw. After the palm is cut, grind first the coarse, and then shallow, edge of the workpiece. Instead of the contour of the palm, you can use the shape of a maple leaf, a star, etc. The subframe should be given a curved appearance. Take a large saucepan, pour a little water on the bottom. In the water for about ¼ immerse any thing - it will play the role of a pedestal for your stand. Soak in the warm water plywood billet. When the water in the saucepan boils, place the workpiece on the pedestal immersed in the pan. Depending on the thickness of the plywood, the process of steaming the workpiece takes 7-10 minutes. After the workpiece has become soft, take a bowl of a larger diameter, put the prepared plywood in it, and cover it with a second bowl. In the upper bowl, put something heavy in the quality of the cargo and leave to dry for the night. In the morning you will find that the plywood has become delaminated - it's not scary. Each layer of plywood should be coated with glue PVA and put in a bowl again, fixing it with an adhesive tape. On top, you should also put a second bowl and squeeze the load. Leave it to dry completely (about a day). Then finally grind and decorate with stain or paint or simply cover with varnish.

Simple holders

A stand made of cork from wine is made extremelyjust. Take two plugs from the wine. In each of them, you should make an inclined opening the size of the thickness of your phone. To do this, at each stopper, point the same contour at the angle that you want. Cut the holes along the contour with a knife. The phone should be inserted into both plugs, placing them on the edges of the device. To prevent traffic jams, connect them with a cord or wire. Another stand is made in just a few seconds from two clips for paper. You will need two clamps - one big, and the other smaller. Hold the handles on the small clamp so that they are directed in one direction perpendicular to the base of the clamp. Open the large one and place the handles of the small clamp into it. Your stand is ready. Also the holder for the phone can be made in origami technique by folding a lot of small triangular elements and composing them in a convenient order for you.
0