LovesTheTeam.com

You will need

• - strong copper wire;
• - cutting pliers;
• - scissors;
• - dark electrical tape;
• - trimming the fabric;
• - hot glue.

Instructions

1

First of all, make a basis for the future decorative vase. To do this, from the wire cut a piece of necessary length and bend it either in the shape of a square or in a circle, but do not fix the ends.

2

Now from the copper wire for the walls of the futureDecorative vase cut the same length along the length. Their number can be any, in our case 6. Then at the ends of each segment make small loops. To do this, bend the ends of the wire and screw around the base. If you want to hide the edges of the loops, then wrap them with a dark insulating tape.

3

In the formed on the edges of the wire loopsvdente in advance prepared round or square basis. Having planted on a basis all copper pieces, fix its edges with the help of an insulating tape. Then from the wire cut a small circle that will play in the decorative vase the role of the neck, and in the same way fasten it to the wire rods.

4

To the decorative vase did not look boring,it is necessary to add two jumpers to it. One jumper should be exactly the same size as the base of the product, and the second - as a neck. After making these details, fix them on the craft with electrical tape.

5

Take the fabric, cut it so that it turned outsegments, the width of which is equal to one centimeter. Obtain the details of the wrapped skeleton of the craft. Do not forget to fix the fabric from time to time with hot glue and make sure that there is no insulating tape anywhere. Decorative vase from the wire is ready!