LovesTheTeam.com

You will need

• - thick paper (for patterns);
• - a pen;
• - cotton fabric;
• - scissors;
• - fur (you can take any, for example, sheep);
• - a piece of dense drape;
• - glue;
• - thick thread;
• - needle (with a suitable eyelet);
• - sewing machine;
• - A piece of leather.

Instructions

1

The first thing you need to do is patterning. To do this, take a thick paper, stand on it with both feet and gently circle your feet. Add on each side about a centimeter and cut two blanks. Fold them together face-to-face and level (trim the protrusions, make the workpieces mirror).

2

Take a centimeter tape and measure its heightfeet. To do this, stand on your feet, find the highest point of the foot and through it measure the height (the tape should run from the side inner side of the foot to the side outer side). Draw a semicircle on the paper sheet, first draw a straight line (its length should be equal to the height of the foot), then from the middle of this line draw a straight line perpendicular to this (its length should be equal to the length from the most protruding point of the foot to the tip of the big toe) . As a result, you should get the details, as in the picture.

3

Next, according to patterns, try sewingslippers made of cotton fabric and try them on. If they sit well on their feet, then proceed to cut out the details of the fur, if the legs are not comfortable, then make adjustments to the patterns.

4

Put a drape and fur in front of you. Put on the drape two paper patterns of feet, circle them and cut them. On the fur (on its wrong side), place four paper patterns (two - patterns of feet, two - patterns of height of the feet), circle the details, then cut.

5

On the drape blank of the left foot, applyfur blank of the left foot (fur out), glue these blanks. Similarly, do the work from the right foot. Using a sewing machine, sew the edges with a zigzag stitch.

6

After the sole of the slippers is ready,you can begin sewing the top of the slippers. To do this, place the fur blanks on top of the soles (left - to the left, right - to the right), gently sweep these edges around the edges, then sew everything in a zigzag line.

7

Measure the length of the side seams of slippers made of leathercut two strips equal to this length and a width of 2-2.5 centimeters. Press the side sections of these stripes inside out, then turn over these leather strips with the soles of the slippers on the slices. Slippers from fur are ready.