LovesTheTeam.com

Even if the house is watered and installedwater meter, rainwater can significantly reduce water consumption. By the way, if you have a counter installed, it will be easier for you to calculate the required amount of rainwater. Do not allow the rainwater to remain in the tanks for a long time. This will provoke the formation of a favorable environment for the development of bacteria. Microorganisms can cause the development of infectious diseases.

We collect rain water for watering the garden

To collect rainwater to irrigate the garden orgarden needs to build an open drainage system. For drainage elements, PVC, copper, galvanized or aluminum materials can be used. The most durable will be an aluminum or copper system. To create it, you need a water intake chute, which is attached to the roof under a slight slope. Such a design will ensure the spontaneous flow of water. We need funnels to receive rainwater. Connect the chute to the tank will be a drain pipe. Attach the gutters to the edge of the roof using hooks or staples. Elements of fastening choose from materials which are not exposed to corrosion and are steady against sharp changes of temperatures. It is better, if the whole system will look beautiful with the interior and color design of the facade and the roof of the house. Also, as the decor for the street space can come out and the selected capacity. For example, install a polypropylene tank with a tight-fitting lid and a convenient faucet. To exclude overheating of rainwater, the vessel is partially buried in the ground. This will also help save space on the site. It is possible to install several downspouts and a corresponding number of tanks.

Rain water for household needs

To collect rainwater for householdneeds inside the house, you can calculate its consumption, for example, based on the number of residents. Installation of tanks is better, of course, provide for the planning of the construction of the house. Since the underground arrangement of containers is most appropriate. Also you must install a filtration system with the required several stages of rainwater purification. Dirty filter must be located at the inlet of the tank. Another filter is inside the tank, and the other is out of the tank. To maintain the performance of rainwater, combine it with the main system. Water is needed in arid periods. Therefore, the rainwater will need electronic sensors and appropriate regulators. The use of such alternative water supply is advisable at high utility rates. When calculating the efficiency of the system, consider the annual increase in prices for utility services, as well as the cost of filters, pipes, tanks, pumps, earthwork and installation works.