LovesTheTeam.com

Why on the walls of the toilet is a raid

Urinary stone, rust staining and calcareousplaque are not formed immediately. If every day to clean the toilet with a brush using a special detergent for toilets, you will never see these defects on the surface of the sanitary faience. Untimely flushing and rare cleaning contribute to the persistent contamination of the toilet bowl. The human urine contains many minerals that settle on the walls of the plumbing, increasing the layers of dirt day by day. This precipitate is difficult to clean with a regular tool and brush.

How to wash a dirty toilet

You can start the total cleaning of the toilet usingwell-proven means of household chemicals. Pay attention to the composition of the liquid, it must be necessarily sodium salts of sulphate, carbonate, silicate and anionic surfactants. Formic or sulfuric acids in the composition mean that the product perfectly fights against the rust. The selected cleaning agent should be applied abundantly under the rim of the toilet bowl. At once to start work it is not necessary, let active substances soften a touch a little. After half an hour or so, start cleaning the bowl of the toilet bowl and draining it with the hardest brush. Rinse with water. Apply the detergent again, once the old stone is not removed, prepare to do this work 5-6 times at least. To combat the plaque on the plumbing traditionally use "Belize". This tool is far from harmless, so it's necessary to work with it carefully. Wear thick rubber gloves and a mask to avoid breathing harmful chlorine vapor. "Belize" also need to evenly pour the walls of the toilet and wait several hours before cleaning. You can wash the plumbing with washing powder with oxygen bleach. Also a good effect gives the use of citric acid and acetic essence. Do not forget to ventilate the toilet well after each cleaning. Do not clean with cleaners in the presence of small children and be sure to clean household chemicals out of reach. If possible, you can clean the toilet surface quickly and easily with an electrolyte from the battery. Work is necessary and in gloves, and in a mask, and in goggles. The electrolyte poured into the toilet should be left for 2 hours, and then washed repeatedly with water. This method excellently removes the old plaque, but it is not suitable if there are plastic pipes in the toilet.

Instructions

1

If the dirt is not too strong, installspecial means in the tank to flush the water, which will gradually dissolve, and when you wash the toilet, it will be washed. Time for cleaning will take more, but do not get dirty and wash the toilet with your hands, and cleanliness will be maintained not temporarily, but permanently. This is an option for lazy cleaners.

2

To remove plaque, use household chemicals. The number of producers offering products of this kind is growing every day, and store shelves are bursting with funds that clean the surface of the toilet bowl. The most recognized and respected hostesses received such funds as Sif, Domestos, Mister Musul, Silit, Dosya, and Duckling.

3

If household chemicals do not help, then dilute in 1liter of water 5 tablespoons of acetic acid and pour the resulting solution of the toilet wall. Do not flush the toilet for about an hour, the solution must be acted upon. After remove the dirt and plaque brush. The method is good because acetic acid is always at hand at any hostess, and do not have to spend money on expensive household chemicals.

4

In case of heavy dirt, limescale orrust household chemicals helps little, or even does not help at all. In order to wash the toilet, you will transfer your entire budget and not achieve the desired result. To effectively combat these contaminants, use hydrochloric acid. To remove the plaque from the toilet as quickly as possible, a 33% solution is required. In principle, only such a concentration can be found in our stores. Do not spare the solution, pour out all the necessary places. Allow the acid to act for 20-30 minutes. At this time, prepare rubber gloves, brush or brush. Be sure to carry out all work in rubber gloves, otherwise you risk getting a chemical burn. The appearance of an unpleasant odor is an indicator that there is a chemical reaction of the acid. Do not be scared. After the specified time, remove the formed dirt with a brush or brush with a hard bristle and rinse with plenty of water.

You will need

• - Gloves
• - Sponge
• - Rag
• - Vinegar
• - Lemon acid
• - Baking soda
• - Means for cleaning the oven

Instructions

1

Most often, greasy dirt is found in the kitchen. Yes, no wonder, only the spray of oil from the frying pan is worth. When preparing the food, oil vapors always stand out, which are deposited on the walls and cabinets with a thick film. This film does not take the usual detergents, in this case, the hostess will have to resort to heavy artillery.

2

Of course, you can use numerousvigorous means, in great abundance represented in trade. For example, a common oven-cleaning spray applied to the surface of cabinets will dissolve all the dirt within 5-10 minutes, and there will be no trace of fat. Just do not forget to ventilate the kitchen well.

3

But if the family is allergic, chemistryyou should not get involved. Moreover, the fatty film is easily removed and less safe means, namely the usual baking powder, which can be replaced with a mixture of baking soda and citric acid. Spill plenty of dirt, sprinkle the surface with a spray gun and wait for a while. Under the influence of reagents fat will gather in lumps, which you will only have to collect a damp rag.

4

Many ovens today havebuilt-in pyrolysis function. During this process, all the adhering fat on the oven's walls burns, and the oven again shines with cleanliness. What can not be said about the microwave oven. But here you can do without vigorous chemicals. Pour water in the bowl with vinegar in a ratio of 1: 1 and turn on the microwave for the greatest power of the minute for 3. Open the microwave and look inside if the fat does not become soft, then start another three-minute cycle. Then wipe the walls with a sponge dampened with undiluted vinegar, wait half a minute and you can clean the dirt with a damp cloth. You will not only wash the microwave oven of fat, but also disinfect it.

5

From the dishes, fat is best removed by the usualmustard powder. Simply soak the greasy dishes in hot water with diluted mustard, and it will shine clean. So there is no need to use chemistry of unknown origin. To get rid of fat it is possible and organic means without any harm for themselves and the environment.

You will need

• Acetic acid, hydrochloric acid, oxalic acid, citric acid, chlorine-containing products.

Instructions

1

Remove yellow lime deposits withacetic acid. Pour the toilet into the toilet and leave it overnight. After this time, brush and rinse with water. If the first time you can not clean the lime scale, repeat the procedure several times. Use acetic acid in small doses.

2

Use a 33% solution of hydrochloric acid forpurification of the toilet. Before proceeding, wear rubber gloves to protect your hands from the harmful effects of acid. In addition, do not forget about special glasses. Pour about 200 ml of the solution on the dry walls of the toilet bowl, trying not to inhale. Then quickly close the lid and leave in this state for 15-20 minutes. After this time, drain the water. This method is not recommended for regular cleaning, only in extreme cases. If you have plastic pipes to the toilet stand, give up the means.

3

With a slight raid on toilet bowl use oxalic acid or citric acid. Dissolve the acid in warm water so that a 5% solution is obtained. Apply the product to the walls of the toilet bowl and wait for several hours. Then rinse with water. When working with acid, make sure that it does not get on your skin. If this happens, quickly rinse the product with plenty of water.

4

With the help of chemical household chemicals, you caneasy to remove yellow coating. Take the "Comet" or "Domestos" and apply on a damp abrasive sponge, it can be bought at any hardware store. Wipe the contaminated areas of the toilet bowl and leave for 1-2 hours. After this time, brush and drain the water. Chlorine, contained in these products, copes well with the lime coating.

5

In order to prevent the emergence oflime scale, regularly clean the toilet. Use special tools to do this. Household chemistry stores provide a wide range of these products. Apply the product to a foam or abrasive sponge soaked in water, and clean the toilet walls. Leave it for a few minutes and clean it again. Then rinse with water.