Tip 1: How to wipe the edge of the hood

Tip 1: How to wipe the edge of the hood

Fur coat on the jacket or down jacket looks likebeautiful and gives the product a special chic. But, unfortunately, the beauty of fur trim should be countered by a significant drawback - this part of the outer clothing gets dirty much faster than others. To restore the attractive appearance of the fur trim, and also to remove the existing dirt, it should be cleaned and washed in a special way.

How to wash the edge of the hood

How to prevent contamination on the fur edge

If you just bought a jacket or a down jacket, andfur on the hood looks new, it will not be superfluous to make preventive maintenance, preventing risk of pollution. Thanks to a simple procedure, the fur will last you much longer and retain its presentable appearance. First, you need to unfasten the fur from the hood, if possible, and spread it on a hard surface, for example on a table. After that, moisten the cotton wool with alcohol and swift, vigorous movements to wipe the edge of the hood along and across. If necessary, you can repeat this procedure one more time. Then you need to let the product dry. After the fur dries, it is necessary to comb it with a scallop or with a brush with a hard pile. After such an alcohol treatment, the fur becomes shiny, fluffy and retains its original freshness longer.

How to wash the fur edge

Very often it happens that the fur trimhood, in contact with the face, contaminated with various cosmetics. As a result, an ugly greasy shine is formed on the surface of the fur. To cope with this kind of pollution, you need to purchase a special tool for washing delicate things. Following the instructions, you need to rinse the fur and dry it at room temperature. If this option does not suit you, then you can use a fairly simple folk way. It is to use chicken eggs. You will need two raw eggs, which should be well shaken, and hand rub the egg mixture into the fur. In this condition, the product should stay about an hour. After this, it is necessary to place the fur edge under running water, the temperature of which should be approximately 25 ° C. The fur should be rinsed for at least 30 minutes. Then carefully dry the edge. If the edge of your hood is made of natural fur, then after washing and drying it is worth ironing the product through an ordinary white paper. With artificial fur, this manipulation should not be done, since it is possible to damage synthetic fibers and damage the fur edge. The white fur edge looks very elegant and beautiful, but it is white fur that has the property of quickly losing its presentable appearance. To prevent premature yellowing of white fur, you can use talc in conjunction with hydrogen peroxide, taken in equal proportions. The mixture should be applied a thin layer on the fur, cleaned with a brush, and then carefully shake the edge, removing the remnants of the product.

Tip 2: How to wash a white down jacket

Careful housewives have long noticed that regular dry cleaning down jackets, Especially white, leads to a rapidaging of the tissue and thinning of the filler fibers. The thing gets messed up. That's why many women of fashion try to wash the down jacket at home. A few tips for proper washing

How to wash a white down jacket

Instructions

1

For things with artificial filler like hologofayber suitable machine wash at low revs. For natural - only manual

2

No bleach

3

Use liquid detergents containing a color reducer.

4

If the water in your house is stiff, be sure to use special softening agents, otherwise yellow feathers on the down jacket can not be avoided

5

Machine wash. Turn the down jacket inside out, after removing all metal parts (pawls, detachable buttons, decor) and fur elements

6

Pour liquid concentrate or liquid detergent. Be sure to use a good colorless conditioner, this will allow faster and better recovery of the filler after washing

7

Program the machine for a delicate wash at 40-60 degrees. Use the additional rinse function. Gentle pressing

8

Hand washing. The important rule is one: do not try to wet the product.

9

Spread out the down jacket on the table or on the floor.

10

Take a clean sponge and soak the dirtiest places.

11

After about 5 minutes, apply a liquid detergent to the contamination and again leave the minutes at 5-7. Use special tools to remove stains from white products, but not bleaches.

12

Dampen the sponge with a cleanser, rub the soiled areas, then carefully clean the resulting foam with a dry, clean cloth

13

With a soap solution in the direction from top to bottom, wipe the down jacket with a sponge until completely cleansed of dirt. The product should be cleaned evenly, otherwise it can not be avoided when it dries

14

In conclusion, treat the entire surface with a weak solution of vinegar

Tip 3: How to erase artificial fur

Artificial fur is an excellent alternative to natural. Modern technologies make it possible to make it from synthetic fibers with imitation of natural furs. Sometimes it is fur from natural is quite difficult. The advantage of artificial furThe simplicity of products, simplicity in care and storage, less susceptibility to spoilage, and, of course, lower cost, is in front of natural products.

How to wash an artificial fur

Instructions

1

Rules of care of the product from artificial furbut are indicated on the product label. Follow these recommendations. Many such products can be washed only manually at a temperature of no higher than 40 ° C, and some - in a washing machine with gentle mode. There is an artificial fur, which can not be washed at all. Do not wring out or dry the products from the artificial furbut in the washing machine.

2

Before washing, the product should be vacuumed using a soft brush. Then you can clean the artificial fur with a brush moistened in soapy water. After that fur Wash with clean water and dry the product at a temperature not exceeding 40 ° C.

3

If the cuffs and collars are heavily soiled, they can be cleaned with a sponge soaked in refined gasoline and well wrung out. After cleaning, the product is hung out for airing in fresh air.

4

Yellowness, which appeared on white products made from artificial fura, remove the brush, moistened in a mixture of lemon juice and water, taken in equal parts.

5

To delete with furand fatty spots you can take gasoline and starch in equal proportions, mix them and check the reaction to this remedy on an inconspicuous area fura. For cleaning, this mixture is rubbed into a dirty place, allowed to dry completely, and then removed with a brush. Old age oily stains are removed in this way in 2-3 doses.

6

Artificial Karakul can not be cleaned with benzene-containing products, but it can be washed. Artificial fur This kind of erase at a temperature of no higher than 45 ° Cusing detergents for wool and silk or a universal detergent. When washing, the product is not tindered and not twisted. After rinsing, you just need to wrap it in a sheet, get wet, and then hang it on your hanger to dry it at room temperature.

7

Still not completely dried artificial fur Do not smooth to prevent rolling and breaking the hair. Contaminated lining on products made of artificial furbut, which can not be washed, cleaned with ammonia or its mixture with denatured alcohol in equal amounts.

Tip 4: How to erase white fur

To fur served longer, you need to take care of him properly. Especially since he is very moody and delicate, especially white fur. Products from it retain their appeal not very long. They quickly burn out and turn yellow, and the dirt on them can be seen right away. Therefore sooner or later the question arises of washing the fur.

How to wash white fur

You will need

  • -lemon juice;
  • -ammonia;
  • -shampoo;
  • -starch;
  • -petrol.

Instructions

1

The cleaning mechanism depends on the type of white fur(artificial or natural). With artificial fur, there should not be any special problems. This is a textile product with a pile. Wash in warm water (no higher than 40 degrees) with powder or shampoo.

2

Rinse well and do not wring it, just squeeze it slightly, wrap it in a sheet and then dry it in a straightened form at room temperature.

3

If artificial white fur has turned yellow, then apply a mixture of water and lemon juice on it, mixing them in equal proportions, and brush it with a brush.

4

With natural fur, things are more complicated. Furriers recommend to protect it from rain and snow, and even more so do not advise it to wash, since the masdra can begin to creep away, and the hairs will fall out. Therefore, if the product is heavily soiled, it is best to give it to a dry cleaning service, while choosing a cleaner specializing in cleaning fur.

5

Considering that fur can withstand an average of 5dry cleaners, then if you just need to refresh the fur, clean the house. This will be a so-called dry wash. Before conducting it, check the skin for strength. To do this, mix 50 ml of warm water, 2 drops of ammonia and 1 drop of shampoo, apply drops on the skin in different places. If you try to stretch it, it does not break, then you can "wash".

6

Sprinkle the fur with potato starch and gentlyrub the product, then spray it with soapy water from the atomizer and rub again. Leave the fur to dry at room temperature, when it dries, scrub it well and comb it.

7

If there are greasy spots on the white fur, thenwipe them first with a cloth soaked in a solution of gasoline and detergent, then with clean gasoline, and then with starch. You can use paste from gasoline and starch.

8

If you need to clean the whole fur coat, for example, fromrabbit or Arctic fox, then unlock the lining, take 2-3 kg of starch and "bathe" the fur in his hands, as in ordinary washing. After that, shake the fur coat well, brush it with a brush and comb it. The result will please you very much.

Tip 5: How to wash a synthetic jacket

Synthetone jacket is in the wardrobe is hardlyevery girl. Still, comfortable, light, warm and very beautiful - ideal for autumn-winter period, dampness and cold. Naturally, many people have a question - how to wash it properly.

How to wash a synthetic jacket

Instructions

1

Do not be afraid to wash the synthepone A jacket in a washing machine - a common opinion aboutThe fact that it can damage the structure of the synthetic insulation is unreasonable. Synthepone does not deform upon contact with water, does not lose its properties and does not come off the lining. Wash such a jacket is desirable at a temperature of not more than thirty degrees, without using powders or liquid products containing bleach. This will help protect the sintepon from damage, and the jacket fabric from white stains.

2

It is also not recommended to soak the jacket in front ofwashing in the washing machine. If there are spots on it, then it is better to wash them separately. For washing in the washing machine, you must choose a gentle or delicate mode. Drying and spinning is not recommended. If the fabric of the jacket is dark, then it is advisable to rinse it several times - this will help to remove the villi. Another tip for washing in a typewriter is to put a jacket in a tissue bag - this will help to avoid tissue ruptures.

3

Synthetone jacket can be washed by hand,again, without soaking and bleaching it. Water for hand washing should have a temperature of not more than 50 ° C. For washing the stains, use an ordinary (preferably a laundry soap) and a sponge, which you wash the dishes. Of course, such a brilliant result, as when washing in a typewriter, you are unlikely to achieve. Rinse out the jacket several times, changing the water after each. Press should be very carefully, not strongly twisting.

4

Naturally, after washing should arisethe question of how to dry the synthpene jacket. Of course, it is desirable to spread it on a towel on a flat surface, but if you do not have such a possibility, you can hang it out on the street (or balcony) by attaching clothespins to your rope over your shoulders or hood. After the jacket is dry, it can be ironed. When ironing, use a fabric lining and a low-temperature mode.

Tip 6: How to wash the down jacket

Down jacket is good not only because it saves well from the cold and is comfortable to wear, but also because it can be washed at home, and there is no need to take the jacket to dry cleaning.

How to wash a down jacket

You will need

  • Three balls for tennis, sparing detergent.

Instructions

1

Empty the pockets of the down jacket from the contents,remove the hood, unfasten the fur from it (if it is fastened with a lightning bolt). If on the sleeves or pockets are formed especially dirty areas, gently wash them in soapy water, trying not to soak the whole product. Take out the waist belt. Fasten the down jacket to the zipper or to all buttons, be sure to turn the prepared clothes inside out. Load all parts (except fur) into the washing machine. Do not soak the jacket before washing, otherwise the fluff will become entangled in the lumps, which will not be possible to put in order after.

2

Put in the drum machine three tennis balls,covered with felt. When the drum rotates, they will beat down the down jacket, and its filling will be evenly distributed throughout the product. Select the delicate mode in the menu, the temperature should not exceed 30 degrees. Fill the powder in the correct compartment or fill with a liquid detergent. Do not use a conditioner or conditioner, it can leave marks in the form of a divorce on the down jacket, especially on a dark cloth.

3

Wash the jacket in the selected mode. Re-rinse when the machine has finished washing. Squeeze the down jacket in a delicate mode at low revs.

4

Take out the down jacket from the drum of the washing machine,carefully shake. Hang on the hangers so that the product does not deform when drying under the influence of gravity. Dry the jacket in a warm place. Periodically shake, try to whip down if it has formed into a lump. Do not dry the down jacket in the spread on the towel, so it will dry for a long time, and the fluff inside it can mold or rot. Dry the jacket as it should be whipped with a carpet tool on the inside. Unscrew, fasten all the details.

Tip 7: How to wash a stroller

Since birth, your baby has his ownfirst personal transport. If you notice that after some time using the stroller, it has become dirty, stains have appeared or the road dust has eaten up in the material, do not get discouraged. Lead stroller in the old look can be at home, using a minimal set of tools.

How to wash a stroller

You will need

  • - liquid detergent
  • - soap
  • - several rags and sponges
  • - brush
  • - water
  • - Screwdriver for screws
  • - pelvis

Instructions

1

Carefully inspect the structure of the stroller. Find out which fabric parts can be removed. It happens that the fabric base of the stroller is attached to the body with the help of special screws, which complicates the removal of the material somewhat. If the mount is made on the buttons, then this will not cause any special difficulties. Look at the wheels to see if they can be removed.

2

First remove the simplest parts of the stroller -a basket for products, a removable bumper and a hood (provided that these parts are disconnected). In the hood is usually inserted an arc to give stiffness, gently pull it out of the hood, trying not to damage the material. Using a screwdriver, carefully unscrew all the screws and remove the fabric part of the stroller. In the cradle-cradle, the hood and the inner fabric in the cradle are often removable. The fabric, which is located on the outside of the box, is often not removed, since it has a complicated fixing. In this case, the box should be washed completely with a rag or a sponge and detergent, and then dry well.

3

Prepare washing solution for washing clothbasis. It is best to use a liquid detergent. Dissolve it in water and soak for a while material. Carefully study the material of the substrate, at what temperature the product wears off. Then, using a brush, gently rub the places with the greatest dirt. Drain the dirty water and rinse the material thoroughly in clean water so that no detergent traces remain on the fabric. If the material of the stroller allows and the characteristics of the washing machine, you can use machine wash in a gentle mode. Make sure that metal parts do not fall into the machine together with the fabric base. It is advisable to deactivate the spin-off function in the centrifuge and gently squeeze the fabric with your hands. Wipe the metal frame of the stroller with a soft cloth soaked in soapy water. Then walk through the sponge with clear water. Wipe the entire body dry, especially all movable parts of the structure, to avoid rusting. If you manage to remove the wheels, wash them in soapy water, then rinse thoroughly and wipe dry. If the wheels do not disconnect from the basic design of the stroller, then wipe them with a separate cloth with a soapy solution. Make sure that the water does not remain in the mobile wheel rotation design, this can cause scratches during the further operation of the stroller.

4

Collect all the details of the stroller after thoroughly drying the fabric backing and wheels. Carefully tighten all screws to their original place.

5

If the fabric base of the stroller is not removed, then wipe the material and all the metal parts of the stroller with a soapy sponge. After this, several times wipe with a rag with clean water all stroller, paying special attention to the tissue basis, to avoid soap divorce. Dry thoroughly afterwards. stroller. Many parents spend washing the stroller entirely in the bathroom, if dimensions permit. In this case, it is important to dry thoroughly after washing stroller and dry all the mechanisms!

Tip 8: How to Wash a Jacket

Let's say you are a lucky owner of a snow-whitedown jacket. It is beautiful, it goes to you and it's warm, but after a while after the socks you begin to notice that the color of your outfit has changed slightly, and not for the better. Of course, you can give a fluffy jacket to dry cleaning, but it is much quicker and cheaper to wash it at home yourself.

How to wash a jacket

You will need

  • Washing machine, detergent for delicate fabrics, hanger

Instructions

1

Strictly speaking, there is nothing in the laundry itselfdifficult. Modern washing machines are equipped with a special regime for 40 degrees for synthetic and delicate fabrics. It may even happen that you have a machine that provides a mode for washing outer clothing - this is even better. Detergent should be used for delicate washing (wool or delicate fabrics), if the jacket is colored - for delicate colored fabrics. Fur parts, if provided by the model, must be unfastened before washing, all zippers to fasten.

2

After the end of washing begins just the mostlaborious work - drying. The fact is that jackets containing fluff, when washed, tend to fall like wet feather pillows. Therefore, it is very important to dry your jacket properly - to do it so that all the fluffs dry up, straighten out and take on the original appearance and properties. After you took out the jacket from the washing machine, thoroughly shake every detail of it: the sleeves, the hood (if any), the backrest and shelves. Try to make the down filling evenly distributed over the surface.

3

Hang a jacket on a hanger in a warm, wellaired place. After a while, when it dries a little - repeat the procedure. Your task is to achieve uniform drying of the fluff inside the jacket, and for this you have to shake it several times. But the result will not be long in coming. When everything is ready - you will again become the owner of a clean, sparkling and even lighter and airy jacket.