What tools are needed to repair
What tools are needed to repair
If you stock up in advance with the necessary tool,the repair process will be more simple and quick. In addition to manual power tools are needed. Since it is expensive, it needs to be gradually acquired in the process of preparing for the beginning of the repair.
Instructions
1
Planning to start repair, you need to preparea set of the most necessary tools. This will help avoid running around the neighbors with a request to borrow the desired device. The proposed list of inventory can be adjusted based on specific needs. In general, repairs in the apartment or at the dacha is reduced to dismantling the floors, working with wood or metal profile, paint and varnish materials, glue and shpatlevochnymi compounds. Therefore, you can determine in advance which tool is required.
2
The first thing you should pay attention to isthe presence of a different measuring and marking tools. For repair it will be required: a roulette length of 3-5 m, plumb bob for mounting gypsum board structures, a marker, a building level, a metal square. You will need a hammer, pliers, wood and metal hacksaw, flat-head and cross-head screwdrivers, piercing piercers (if the walls are brick, then 20/15 mm or 20/18 mm in size).
3
To drill holes, you needelectric drill or perforator. Screwdriver, which works on battery, will be extremely necessary during the repair. This tool is very convenient, since it allows you to work with it in the most inaccessible places. Without it, it is not possible to install a false ceiling from gypsum board or other structures made of this material. The screwdriver must be pre-equipped with a set of cue ball, and the drill with drill bits of different diameters.
4
Another extremely necessary in the repair processtool - Bulgarian. So in the people called angle grinder (USM), with which you can perform a variety of work: from cutting metal and other pipes to sawing tiles. Bulgaria should be equipped in advance with disks of different thickness and purpose: for work on metal, stone, concrete.
5
If you are supposed to work a lot with the tree(for example, level the floor), you need a manual or electric plane. The width of the sole of this tool is chosen based on the area of processing: if it is large, you need to buy a more expensive and powerful plane. It is important to prepare a machine for grinding and sharpening blades. But for this purpose you can use a regular emery circle.
6
For finishing works you will need spatulas with differentwidth of the blade, paintbrush, rollers for applying glue to the walls and smoothing the wallpaper, texture roller for decorative plastering, roller tray (required for painting). For work with gypsum cardboard you need an electric jigsaw, a clerical knife, metal scissors.