LovesTheTeam.com

Instructions

1

You can mix paints in some ways - in some cases it is better to mix in advance the required amount paints on a palette or on a canvas. If you paint with watercolor, mix paints directly on paper - the transparent structure of watercolor allows you to create beautiful transitions of colors directly on paper.

2

Stirring different shades of colors,how well they interact with each other. If you mix red cinnabar and lead white, after a while the paint will crack, and a beautiful pink shade will darken.

3

Also remember that you can mix yellow, blue and red paints with other shades, to get a large range of new colors. At the same time, these paints - yellow, red and blue - can not be obtained as a result of mixing, as they are the basis of any scale.

4

If you want to get a green color, mix an equal amount of yellow and blue paints. If you want to get lighter ordarker shades of green, start adding more blue or more yellow to the resulting color. Try to mix only those colors that are close to each other in the color circle - otherwise, the mixed shade does not turn out to be saturated.

5

To get gray paint, mix white and black paints in the right proportions. In the case of watercolor paint, just dilute the black color with water. In combination with white paper diluted black paint will give a suitable gray tint.

6

The less color you use in the drawing, the more colorful it becomes. Consider this rule in the process of painting. Remember which paints can be mixed with each other, and which can not be used to further dry paints Not darkened and cracked because of chemical inconsistencies.

7

For some shades, you can mix not only two, but also three different paints. For example, to get a purple color, mix the red and blue paint.

8

To obtain an orange shade, mix the redand yellow color, to get brown mix red and green; if you want an apricot shade - mix red, ocher and white. For green color, mix yellow with blue, for terracotta - orange with brown, for beige - brown, yellow and white.

You will need

• Adobe Photoshop
• Digital image for correction.

Instructions

1

Open the selected image in the programAdobe Photoshop. This can be done via the File - Open menu, or by pressing the Ctrl + O key combination. You can also drag the file into the working window of the program using the mouse.

2

After you open the picture, use the Image - Ajustments - Hue / Saturation menu. Or, press Ctrl + U.

3

You will see a dialog box with three sliders. Moving them, you can change the color gamut (Hue), saturation (Saturation) and brightness (Lightness) of the image. Experiment with these settings, achieving the desired result to you. As soon as the color of the picture suits you, click the "OK" button in the dialog box.

4

Now you can save the drawing usingmenu File - Save (if you want to make changes to the original image). The File - Save As option allows you to save a separate copy of the pattern with the changed color. In the dialog box that opens, you can specify the location of the file to be saved on your computer and its format (for example, jpeg).

5

After that the following window will automatically appear,In which you can select the quality of the file. Moving the slider, choose the optimal combination of the quality of the picture and its size. The size of the picture can be seen in the right part of the window, under the buttons "OK" and "Cancel".

You will need

• - ruler;
• - scissors;
• - the cloth;
• - sewing machine;
• - paint;
• - roller.

Instructions

1

Professional replacement of upholstery make inspecialized salons. However, with a small chair or padded stool you can do it yourself. Repeat the old fabric and remove the soft filler if it is worn and wrinkled. Cut out from the thick foam rubber the details corresponding to the form of the backrest, seat and armrest of the chair or chair. Apply universal adhesive to the surface of the furniture around the perimeter (squeeze it out with a thin dotted line) and attach the foam rubber without pressing it.

2

While glue dries, look for a newupholstery. On a fabric of a suitable color draw a square, equal in size to the seat. With each side add 10-15 cm - this is the allowances for the seams and for the hem. At each of the corners make an incision reaching the line that marked the perimeter of the seat (the incision should divide the right angle of the square by 45 degrees).

3

Fold all edges of the fabric 1-1.5 cm apart and suture it. Place the workpiece on the seat so that the legs pass into the incisions at the corners. Loose edges under the seat and secure with a stapler.

4

To make removable covers for furniture, to the corners of the parts sew ribbons, with which the cloaks can be tied.

5

Change the color of wooden parts can be with acrylic paints and impregnations for wood. Remove the old paint from the furniture, cover the surface with a primer and leave to dry for half a day.

6

For a radical change in appearancecolor the wood with acrylic paint using a roller of suitable width. Use a brush for these purposes is inconvenient, because on the surface will remain furrows from her villi.

7

To give fresh wood, but at the same timenatural shade, cover furniture details with stain or linseed oil - these compositions emphasize the texture of the material and only slightly adjust its true color.

8

Iron elements can also be decorated. Prepare them for painting, clearing of dirt and degreasing, then apply 2 layers of anti-corrosion impregnation. When the base dries, paint the metal parts of furniture with water-dispersion enamel - it will give a permanent matte coating, which will last for several years.

You will need

• - paint;
• - spray gun or roller;
• - tray for paint;
• - a rag;
• - Brushes.

Instructions

1

Correctly choose a paint for painting Wallpapers. Remember: Use only water-based material: latex, acrylic or dispersion. And here's another point to which you should pay attention: the paint used should contain a minimum of binding material. Means with a high concentration of astringents too quickly scrape the picture on the wallpaper.

2

Using a sprayer or a roller, paint the front side Wallpapers in the desired Colour. Before pouring the paint into the tray in which the roller is dipped, always shake the jar with the paint several times (the dye must be uniform).

3

Paint the front side Wallpapers with the subsequent erasure of foam. This method of changing Coloura Wallpapers based on the fact that the patterns of "foam" and "non-woven"have different moisture capacity. In view of the fact that the "fleece" is more water-intensive, the paint absorbs this pattern almost instantly. As for the "foam" pattern, it is less moisture-intensive, therefore, when covering such wallpaper, some of the applied layer can be washed off. This method of change Coloura Wallpapers Used to achieve, for example, the ancient effect. However, there is one significant drawback in this method of painting Wallpapers: it is very laborious.

4

Recolour individual patterned elements Wallpapers. It is not difficult to do this: first paint the surface Wallpapers paint the chosen shade and let it dry, and then paint the individual patterns with the paint of another Coloura.

Instructions

1

Resin, various essential oils and salts,Contained in young shoots of pine, make this wood incredibly curative. Therefore, beds made from this wood have aromatherapeutic properties, they make human sleep healthy, and immunity is strong.

2

Since ancient times there has been a belief that pine isTree of knowledge, it is for this reason that you should make school and work furniture from this breed. It is believed that it is able to help focus, concentrate where necessary. Pine is able to relieve stress, stress and even depression caused by long hard work or study. Ancestors suggested that if a person comes to a pine forest and stays there with an overnight stay, then in the morning he will necessarily wake up to a completely different person, rested and refreshed, full of vitality.

3

The inhabitants of China and Indochina call this tree immortal and believe that it can attract stars. And its main property, in their opinion, is to bring good luck and prosperity.

4

This furniture is particularly beneficial for people suffering from respiratory diseases. pine has antiseptic, bactericidal and disinfecting properties.

Instructions

1

First of all, you need to take out of the room allunnecessary items of furniture and leave only the kitchen set. On the floor it is better to lay a film or newspapers to protect the laminate or linoleum from spray paint.

2

Before painting it is necessary to remove all accessories from furniture, so as not to damage it. Skin must be treated all surfaces of the facade, with the aid of putty for wood to close all chips and cracks.

3

If previously the kitchen was painted in light colors andthe structure of the tree is preserved, then the decorative and protective composition is suitable for repainting. It is better to choose products on a water basis, so that when working there is no smell, and they are designed for domestic work. An example is the paint for the tree "Belinka" and "Pinotex."

4

As a tool, a brush withmixed or artificial bristles. With its help, the composition is very easy to apply. The coating dries about 8-12 hours, then a second coat can be applied. It is worth remembering that you need to choose similar colors or darker ones than they were before. At the end, the wooden façade can be painted with water-based varnish, which will give strength and water-repellent properties to the tree.

5

If the color of the facade of the kitchen was dark, then it is betterrepaint with water-based paint. Of course, it will not retain the structure of the wood, but it can give the tree any shade. Before painting, you also need to surface the surface with a sandpaper and apply a water primer. This will not allow the composition to be absorbed into the wood, the paint will lie more evenly.

6

For the kitchen façade washablewater-based paints "Euro-20", "Dali for bathroom and kitchen", "Belinka for damp rooms". These compounds form an excellent vapor-and water-permeable coating, the surface can be washed at least every day with any means, while the paint does not wipe away, retains its color for a long time. For greater strength on top, two layers of water-based varnish can be applied, which additionally gives the wood a pleasant sheen. It will be more convenient and practical to apply the water-emulsion composition with a velvet roller with medium pile.

7

With the help of modern paint and varnish materialsit is easy to give the kitchen any color, even the brightest and juiciest. Time for repainting the facade will take very little, and special heaped tools will not be needed, and the result will please for many years.

Bleached oak in the design of an apartment or house

Using bleached oak in the interior -an excellent option for those people who care about environmental safety and the environment, think about health - their own and their children, are not indifferent to the spectacular appearance of the office or home. It is great for creating not only classical design, but also official, as well as the style of high-tech, modern, etc. The bleached oak adds a considerable amount of coziness to any interior, harmonizes the internal state of people living in the house, and adjusts them to a benevolent state. In addition, in design, bleached oak looks very effective and elegant, it can be the finishing touch when creating luxurious interiors. Thanks to its shades, it not only visually expands the space, due to which it is ideal for small rooms, but also caresses the eye, creates an incredibly comfortable atmosphere in the apartment or in the house, both for the owners themselves and for their guests. It also allows you to keep cleanliness in the room without much effort, since it has a unique ability to repel dirt.

Bleached oak floor

Oak is one of the hardest and hardest specieswood, therefore the boards made of it are not subject to abrasion, are wear-resistant and reliable. Laminate flooring made of bleached oak is recommended for use in interior design for people who suffer from allergies, asthma, various diseases of the respiratory tract, since it does not accumulate dust. To select a floor from the given material it is necessary under a dominating shade of an interior. If it is warm, then it is better to choose yellowish shades of oak; if pastel and pale - "frayed" varieties; if the strict and cold - the gray colors of bleached oak.

Furniture

Stylish furniture from bleached oak in the interiorperfectly combined with the walls of cream, light green, pale blue, white and pale pink. It is great for small darkened rooms, makes them lighter and more spacious, looks very nice against the background of both light and dark walls. Furniture made from bleached oak perfectly harmonizes with most shades - from light pastel to saturated and almost black.

Interior doors

So far, the doors of bleached oak in the marketare presented in small numbers, since the peak of their popularity is yet to come. But if you want to get ahead of fashion - now is the time to choose such models. The main thing is to remember that the bleached oak does not like "raznoboya" in textures and colors. Therefore, the design should be carried out in a unified style. And yet to finish once the floor and ceiling with one material - it's wrong. Now it remains to say what kind of bleached oak wallpaper should be chosen. Light wallpaper should be purchased if the floor is dark, dark - if light. As for the color, it can be anything, as bleached oak is perfectly combined with almost any shades, except dirty marshy and dull.

Instructions

1

The main purpose of siding is to protectFacade of the building from adverse weather conditions: snow, wind, rain and dirt. The color scheme of it is so great that it allows you to choose the most pleasant shade for any building. Picking up a color is quite difficult, because there are about twenty-five coloring panels, and each of the colors has a rich palette of shades. Twenty-five colors of the palette are divided into three main groups: color, white and pastel colors.

2

In order to choose the optimal colorsiding for your home, use the services of construction companies offering a "façade on a turn-key basis." Specialists of similar firms will consult you concerning a choice of color, design and the firm-manufacturer of a building material. In addition, employees go to the house to the customer and calculate the required amount of material in each individual case. Color matching is a crucial moment for all kinds of this building material (vinyl, steel, aluminum) except for wood, which can be painted in any color.

3

Visit the specialized websites dedicated tobuilding topics. Many of them have special configurators, with which you can easily choose the color of the building material for your house (for example, http://sidingsystem.biz/index.php?page=podbor-tsveta-sajdinga-royal-europa). Create your own or pick up ready-made finishes.

4

When using a siding, it becomes possiblechoose the most successful, original color solution for finishing the facade of the building. Choosing the right color and hue, you can proceed with the selection of accessories and fasteners. They can go both in tone with the main panels, so be contrast - it will give the facade of the house originality. You can also finish the yard construction - this will make the whole complex harmonious in style and color.

You will need

• - Furniture panels;
• - table top;
• - Roulette;
• - suitable fittings;
• - Screwdriver.

Instructions

1

There are two options for installing a dishwasher: installation in an already prepared kitchen or installation separately. Canopy facadebut only in the first case and specialcomplexities with this should not arise, since all the world's leading manufacturers describe this procedure in detail in the attached instruction. To implement it you will need furniture panels, table top, tape measure, appropriate hardware, screwdriver or screwdriver.

2

So, first install a dishwasher the car in the niche prepared for it and with the help offix special screws at a convenient height for you. Keep in mind that complete with fully built-in models of dishwashers are supplied ready-made templates, with which the furniture facadeThey are attached to the dishwasher door.

3

Fasten the fastening elements to the slots on the housing.Then, instead of "native" short screws on the inside of the door, install the prepared longer bolts with nuts that can grab the furniture facade. It remains very little - to adjust the handle and other decorative elements (if any) to the door facadea.

4

There is another method - more simple, in order to lock the door facadeand before installing the bolts, useDouble-sided tape. Specialists also recommend using a 1.5 mm cable and an earthed socket designed for at least 16 A.

5

For connection to the water pipe, it is recommended to use a tap with external thread 25. If you installed a dishwasher the car at some distance from the sink, then you will need to extend the water hose.