So that the shoes do not slip on the ice

So that the shoes do not slip on the ice

No winter can do without ice. Slippery roads cause numerous injuries - dislocations, bruises and even fractures. In the ice everyone thinks about his safety and first of all you should pay attention to shoes. Of course, you can use advice on choosing the sole, but not always it saves. There are many very simple ways to make shoes more stable, which everyone can use.

Winter shoes

You will need

  • pebbles, superglue, sandpaper, old felt boots, river sand, raw potatoes, sticking plaster

Instructions

1

In order that the shoes do not slip on the ice,Cut out the application from the sandpaper in the shape of the sole, and then glue it with the hard side up. Slipping the shoes will be less, but with a strong ice, this method may not be very effective. Sandpaper can be replaced with a regular adhesive plaster, which can be purchased at any pharmacy.

2

The most effective way to avoidslip is another way. Apply a super-glue on the surface of the sole, and then sprinkle it abundantly with very fine pebbles or river sand. Compared with the previous method, shoes will become more stable. The sole, treated in this way, does not glide at all on the ice.

3

If you do not have time and urgently need to go outon the street, try carefully rubbing the sole of your shoes with raw potatoes or salt. This technique can protect you from the ice for a while. The main drawback of this method is not a very long effect.

4

Everyone knows that the more prominent the sole, theless it slides on the ice. Unfortunately, manufacturers of winter footwear do not always think about it. You can change the relief of your soles yourself. To do this, heat on a fire an ordinary nail and "draw" them on the sole of additional drawings. This method is suitable only if the sole is made of rubber.

5

Can save the ice and the usual old felt boots. Cut out small pieces of felt and glue them to the sole. The disadvantage of this method is the rapid wear of the material. Procedures will have to be repeated quite often.

0