Tip 1: How much does a skateboard cost?

Sport and Fitness

Tip 1: How much does a skateboard cost?

Skateboarding is very popular amongchildren and youth. To learn how to ride properly, you need not only work on skills and physical training, but also correctly choose a board without trying to save on its quality.

What determines the cost of a skateboard

The price of the board can vary from an average of 500 r. up to 10,000 r. First of all, it depends on the quality of the materials used, and on the second - on the manufacturer. On the brand in some cases you can save, but buying a cheap board, realizing that it will be unsafe, unreliable and short-lived, is a bad idea.

There are companies that specialize in producing inexpensive but high-quality skateboards for beginners. Clarify the information from the seller or experienced professionals, so as not to make a mistake in the choice.

The higher the quality of the board itself, the more expensive it iscosts, but the more reliable it turns out. Suspension and wheels also affect the cost of the product. Substandard elements knock down the balance and do not allow good adhesion to the surface, so they make skateboard unsafe. Another detail that forms the price of a skateboard is the bearings. Cheap bearings quickly wear out, and eventually the board has to be changed only a few weeks after the purchase. Expensive details last much longer, but if you plan to perform complex tricks, you should be prepared to make them out of order ahead of time.

How much do skateboards cost for beginners and professionals

The cheapest children's skateboards stand on averageabout 500-1000 rubles. Models for teenagers have a higher price - about 1000-1500 rubles. It should be taken into account that we are talking about products for beginners, which after a while will need to be changed to a more "advanced" model.

Pay attention to promotions, discounts and sales to buy cheap skateboard cheap. Also do not forget to compare prices in different stores.

Mid-level skateboards that can developrelatively high speed and differing in good adhesion to the surface, cost on the average about 3000-5000 r. They are suitable for performing many tricks, so they are often used by fans who have already learned to ride well, but are not yet ready to move to professional models. The price for such products also depends on the brand and design. Finally, the cost of skateboards made of high-quality materials and characterized by excellent characteristics reaches 7000-10000 rubles. These models are designed for professionals. In stores are also more expensive products from world famous brands. They prefer people who often skate and perform complex tricks, which means they need really reliable and convenient equipment.

Tip 2: How to collect a skateboard

Assembling skateboard it is not necessary to carry out independently. Collect it will help you directly in the store where the purchase was made. However, there are situations when you need to know about the rules of assembly. For example, if the hangers and wheels can still serve, and the deck needs to be replaced.

You will need

Glue, knife, awl, bolts, nuts, screwdriver, wrench

Instructions

Take the deck. Release it from the factory cellophane. Glue a special skin to it. Thus it is necessary to be convinced, that the deck is dry without any pollution.

When sticking the deck observe the accuracy. You can not allow the formation of bubbles and wrinkles. If their occurrence could not be avoided, use a sewing needle. A sharp knife will help remove all excess on the edges when the skin dries. Also around the edges, go through the file. This will extend the life of the skin.

On the finished deck, make holes for the screws. Using an awl, pierce the skin from the bottom surface of the deck, through the holes in the places where the suspensions will be fastened.

Collect the wheels. It should be remembered that each wheel is equipped with two bearings. The assembly of the wheels can be carried out in many ways. However, the easiest way is to press the first bearing into the wheel, then insert the bushing and install the second bearing.

Screw the wheels to the suspensions. Install washers on either side of the wheel. Put it on the suspension shaft and screw it with a nut. The rotation of the wheel should be free, so you can not tighten the nuts. Observe the accuracy.

The pendants are ready. Now put everything in one piece. Insert four bolts through the holes that were made in the skin in advance. Take the pendant and put it on the bolts. In this case, shock absorbers should be directed to the center of the deck. That is - look at each other.

Use a Phillips screwdriver and a wrench to tighten the connection. To make the skateboard last longer, install spacers between the deck and the hangers. They will soften the landing from high obstacles.

Next, adjust the tightness of the shock absorbers. From this will depend on the comfortable management of the skateboard, its easy slope, etc.

Assembly skateboard finished. Now you can go and try it for strength.

Tip 3: How to choose a skateboard for a child

Skateboarding - one of the most popular extreme speciessport. And skating on skateboards are dealt with by adults and children alike. To achieve great success in this sport can help a quality, properly selected board. Especially important and responsible is the choice of a skateboard for child.

Instructions

The main criterion that must be considered when choosing a skateboard is the material from which it is made. Remember that the strongest, strongest and most flexible boards are made from Canadian maple.

The length of the skateboard does not really matter for children and beginners in this sport. But if your child is much larger and higher than his peers, choose a skateboard for him more authentic.

But the width of a skateboard for a child is a parameterquite significant. If your child is relatively short and his size is not more than that of other children of his age, choose a skateboard for him, whose width does not exceed 7,5 inches. The most suitable option for a tall skateboarder is a board with a width of up to 8 inches.

Only when your child fully learnsthe basics of skateboarding, choose the width of the board for it, depending on the style of riding. If your child crazily like to "twist" the skateboard, give preference to a more maneuverable narrow board. If he excellently does "slides" and is engaged in jumping from the steps, choose a young athlete stable wide skate. The universal average board width is 7.75 inches.

Each skateboard has its expiration date. Therefore, choosing it for the child, give preference to the board manufactured this year. Remember that the longer the skate is stored, the more it is deformed.

Make sure that the surface of the vendingyou skateboard absolutely flat. To do this, lift the skate and look at it from the front. In this position of the board you will notice any irregularities on its surface.

When choosing a skateboard for a child, pay attention to the suspension - the parts that connect the wheels to the board. Give preference to aluminum pendants with steel rods.

The wheels of a good skateboard for a child should not be too stiff. The harder the material from which they are made, the higher the speed of the skate, but worse than its adhesion to the surface for skating.