LovesTheTeam.com

How to choose the right place for tent installation

At first glance it seems that nothing complicated ininstallation tent is not. Stretch rope twine, set the pegs - and ready. In fact, there are many tricks that make spending the night as comfortable as possible. And most importantly in the correct installation of the tent - the choice of a place. The ideal place for installing a tent is a dry hillock. The higher it will be, the better. This gives several advantages. Firstly, if it rains, all the water will flow down and not flood the tent. Secondly, on the hillock a light breeze often blows, which carries away mosquitoes and other insects. Thirdly, and most pleasantly, from the elevation usually opens a very beautiful view. It is worth paying attention to whether there are rotten trees near the tent - they can fall with a gust of wind. Check the soil - come stronger. If moisture acts, choose a drier place. To see if there are anthills nearby, bestial trails. Finding a suitable place, you have to deal with its arrangement - to clear the land of rocks and debris. If the street is cool, you can insulate the bottom of the tent with the help of spruce lapnika. To do this, you need to cut several large branches with fluffy needles and put them where the tent will be installed. Needles will create an additional layer between the bottom and the ground, with such a feather the tourists will not freeze even in winter.

How to install a tent

The tent needs to be removed from the bag and placed on aground or birch-bark with a dark, dense bottom down. Collect the arcs by inserting the tubes one into the other. Further, depending on the design of the tent. If it is a modern tent with an awning, the arcs are crossed one on the other, the lower ones are inserted into special openings on the bottom of the tent. And then to the arcs with the help of plastic hooks the lower layer of the tent is fixed. Above the tent is poured, into the pockets of which the arcs are passed. To the arches the tent is fixed from the inside with plastic holders. Then the arcs are firmly inserted into the ground. After that, the twine stretches in the corners, and the tent is fixed with pegs. Pegs need to be driven into the ground as tightly as possible so that a gust of wind does not knock the tent down. Triangular tents of old designs are rarely equipped with awnings. In addition, they do not have special arches, the posts have to be made from improvised materials - thick knots. It is necessary to choose two dry branches and install them inside the tent, resting on the canopy. After this, stretch the strings and secure them with pegs. It is better to cover this tent with polyethylene, since the canvas passes moisture, and during rain it is possible to get wet. Polyethylene is fixed to the tent with the help of usual clothespins. And so that it was as tight as possible and no creases were created, at the edges it is possible to tie ropes and fix polyethylene tent pegs.