Rules for installing the front door

Rules for installing the front door



A secure metal door will help protectapartment or office from the penetration of unauthorized persons into them. Therefore, the installation of doors must be approached seriously. In most cases, this task is undertaken by a firm engaged in the implementation and installation of doors. But for this service, as a rule, you need to pay. And then some economical apartment owners refuse from the services of the master and independently are engaged in the installation of doorways.





Rules for installing the front door

















The installation of a new front door, as a rule,begins with the dismantling of the old one. The old door frame needs to be carefully removed without damaging the doorway. Then you should prepare it for work: remove old nails, plaster. Then you can proceed directly to the installation of a new door frame. You can execute it in several ways.

Methods of installing doors

One of the most common techniquesis carried out by means of special mounting plates. They are imposed from the inside of the apartment and then fastened to the wall by anchor bolts or steel rods. But the best way is to use the anchors. In this case, the masters recommend that when installing doors, put as many thick and strong anchors along the perimeter of the door frame as possible, which must be securely fixed in the wall.
In ceramic, silicate and concrete blocks, the depth of fastening must be at least 10 cm. In hollow, cellular and porous blocks this figure is from 15 to 20 cm.
To the wooden box the mounting plates are fastened by means of ordinary screws or screws, to metal ones - they are welded.
When assembling doors, masters sometimes replace the anchors with steel bars, but this is not right. The design and shape of the anchor provide a more secure attachment in the wall than the rod.
The best is the so-called Europeanmethod of installing doors. Such doors are distinguished by a more reliable design, which has spetsustroystva outer box, reliably covering the doorway both from the outside and from the inside. Carefully study all the pros and cons of both ways of installation. Look for the information you need at the forum dedicated to repair, find out the opinions of specialists, reviews of owners. Specify, how much will it cost to install the door, if you resort to the services of a professional.

Door installation

When you decide on the installation method, you needit will be correct to calculate the clearance to the wall. This figure depends on which method of installing the doors you use. Next, you should fix the box in the doorway and fix it with wooden wedges. After that, the door leaf is directly mounted. Do not forget to use the building level or the plumb line: this will ensure the correct, even, the location of the door. Install the door pillar from the hinge side. Note the location for the bolt holes. Weld the bolts to the mounting plates. Lubricate the door hinges. Hang the door. Now you need to align the side where the lock is located. And only after that you can fix the rack in the doorway. Once again, make sure that the door opens and closes normally, without touching the box. If you do not notice any shortcomings, firmly fasten the box, and then fill the space between the door and the wall with a cement composition, preferably with polymer additives. For this purpose, mounting foam is also suitable.